Originally Posted by IceKold

Thanks for pointing that out to me. I really don't know why except that it fit.

I will certainly go back and correct that. Thanks again.

No problem..!
Very nice build.

Originally Posted by IceKold

Thanks for pointing that out to me. I really don't know why except that it fit.

I will certainly go back and correct that. Thanks again.

You will get a little more room for all those wires too.
I wish I had a bit more space in mine. I use 10 gauge for my battery wire because I was out of 12 and didn't want to wait for more. Needless to say, its pretty cramped. I need to upload some updated pictures.

Originally Posted by In-Flight

You will get a little more room for all those wires too.
I wish I had a bit more space in mine. I use 10 gauge for my battery wire because I was out of 12 and didn't want to wait for more. Needless to say, its pretty cramped. I need to upload some updated pictures.

Thanks Dialfonzo and In-Flight. I braided all of my motor wires and I did use the 10 gauge wire which helped to nicely fit inside along the frame. A little better but not by much. Please share yours In-Flight when you get a chance.

I need that 500 size now!!

Eric gave me half inch spacers for my Vtail and I couldn't be more happy with it.
All my electronics are safely tucked inside, and there's no top deck.

I have to ask though, whatsup with the big yellow buoy? Sink safety for flying over water?

LOL!! I like using them for orientation purposes. Who knows...I may need them for over water.

My PIDs for 2.2 MultiWii at the moment.
Roll 3.4/.030/23
Pitch 3.4/.030/23
YAW 3.6/.045/0
They seem good with the exception of the slow left YAW I always seem to have.
I turned YAW I up to compensate, but that didn't seem to do the trick. It actually introduced slow oscillations. Any ideas?

I haven't messed with LEVEL or GPS much so they are still sitting at the defaults. I've been flying mostly ACRO.

FYI, I'm running in Y4 with no custom mixing.

Originally Posted by BadBert

Ok, cant wait to se the tri design

That friend of mine is really looking for a smal frame (like the bambucopter one) and wants to fly with it this summer...

Has he looked at this one?
http://blueskyrc.com/index.php?main_...products_id=56

-K

Originally Posted by Dialfonzo

Ok...

Who would be interested in paying a bit more but having red anodized round standoffs?

Dunno about red, but Blue would be nice.

-K

Originally Posted by kad

Has he looked at this one?
http://blueskyrc.com/index.php?main_...products_id=56

-K

i like that

Hey guys got mine today YIPEE thanks heaps Eric well worth the wait.I am now a proud owner of a Hunter 400 easy assembly ,will put electrics in friday ,will post a video of aerobatics see what I can do with this baby ,below is a video from the weekend to entertain you guys from a standard X config
Cheers.

Insane Quad chopper, rips it up ! (5 min 2 sec)

Originally Posted by micool72

Hey guys got mine today YIPEE thanks heaps Eric well worth the wait.I am now a proud owner of a Hunter 400 easy assembly ,will put electrics in friday ,will post a video of aerobatics see what I can do with this baby ,below is a video from the weekend to entertain you guys from a standard X config
Cheers.
http://www.youtube.com/watch?v=JVa3Av2ggUc

Nice to know you like it..
When will it be in the air with a video ?

Originally Posted by Dialfonzo

Nice to know you like it..
When will it be in the air with a video ?

should be going by Friday so hope by Sunday see how I go,

Originally Posted by micool72

proud owner of a Hunter 400...............
below is a video from the weekend to entertain you guys from a standard X config
Cheers.
http://www.youtube.com/watch?v=JVa3Av2ggUc

Love the Colour scheme. Eric why you not offer me orange. LOL.

What electronics do you plan to use for your new toy?
will you be taking advantage of the canopy for your 400?
Avaliable in a few weeks...


Love the little X config. tough little crafts. might have to get something like that for my son.

Originally Posted by Innerbreed

Love the Colour scheme. Eric why you not offer me orange. LOL.

What electronics do you plan to use for your new toy?
will you be taking advantage of the canopy for your 400?
Avaliable in a few weeks...


Love the little X config. tough little crafts. might have to get something like that for my son.

Going for the budget set up
Rcx 1800kv motors
Rcx Simon k 20amp esc
KK2 board
already have this gear to use has proven itself to me as per videos only problem I have been having is breaking props midflight but on the Hunter i can fit Carbon props on so should be fun.itchin to get home now to finish it haha
Cover looks nice but I also appreciate the look of the bare frame as well maybe I have one of each

humm im starting to get a feeling iv over killed mine. lol
ProFlight-UK 30A ESC SimonK
MYSTERY A2208-14 1450KV Brushless

yes the frame is very nice on its own. a lot of time has gone into it.
im not trying to exclude any of Eric's exceptional work from ones eye. i work quite closly with Eric on many projects and im happy he doesn't feel im shadowing his work. ... i hope.
but the canopy was kinda a self custom project that we are now making available if other want one.

... The truth... im lazy and trying to fit all the components in is becoming a pain.... so really what im doing is covering up my own work.. LOL


its getting there. just waiting for my motors to arrive so i can work out cutting the wires to the correct length, etc.