Shop our Airplanes Products Drone Products Sales
Thread Tools
Feb 26, 2013, 09:26 PM
Registered User
Anyone know why my F20A from HobbyKing don't beep when I hold them against the battery terminals? Would it be they aren't getting a good enough connection to boot the ESC?

I see the light on my RX blink once when I connect one of them, but it doesn't stay on and the ESC is silent. Reason I am doing this is because I don't want to get everything wired and put together and find out later that I have a bad ESC.
Sign up now
to remove ads between posts
Feb 27, 2013, 01:28 AM
Registered User
Freakazoid's Avatar
To be fair, ESCs dont make sounds. Theres a motor connected to it right?
Feb 27, 2013, 07:52 AM
Registered User
yep motor connected.

figured I would go ahead and wire all of it and see what happens. but last night I never did get it to stay on just by holding the leads to the battery
Feb 27, 2013, 03:23 PM
Registered User
@ alwayscrash take a look here from 2010

https://www.rcgroups.com/forums/show...2&postcount=49
Feb 27, 2013, 03:37 PM
"you'll play to live "
Alwayscrash's Avatar
Quote:
Originally Posted by janhiev
@ alwayscrash take a look here from 2010

https://www.rcgroups.com/forums/show...2&postcount=49
Ha, an old good prototype.Thanks for the link.
AC
Feb 28, 2013, 04:19 PM
Registered User
Hello, I would like to buy one of these - does anyone know when this will be back for purchase?

Also what are peoples preference? the 500mm or the 400mm? I am looking at FPV and nice stable flying

Thank you - this frame looks awesome!
Feb 28, 2013, 06:34 PM
"you'll play to live "
Alwayscrash's Avatar
Quote:
Originally Posted by Stealthmatt
Hello, I would like to buy one of these - does anyone know when this will be back for purchase?

Also what are peoples preference? the 500mm or the 400mm? I am looking at FPV and nice stable flying

Thank you - this frame looks awesome!
You have to mail Dialfonzo for sale info .Sure 500 size will be best for FPV.
AC
Feb 28, 2013, 07:14 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
I know... i know...
Feb 28, 2013, 09:23 PM
Registered User
No pressure man, we are all waiting patiently.
Mar 03, 2013, 07:50 PM
Registered User
miniquad22's Avatar
My fpv gear came in but my tri is still under construction so I temporarily threw it on my vtail. If the flight time and footage are okay I might just keep it on this setup.
Last edited by miniquad22; May 04, 2013 at 12:02 PM.
Mar 04, 2013, 06:10 PM
Registered User
There seems to be a little slop in the v assembly where it meets the tail in my 400. Is that normal? Anyone else deal with this and come up with a fix?
Mar 04, 2013, 06:14 PM
kad
kad
Quad Crasher
kad's Avatar
Quote:
Originally Posted by Pablochopper
There seems to be a little slop in the v assembly where it meets the tail in my 400. Is that normal? Anyone else deal with this and come up with a fix?
That doesn't sound right. Both my mini and my 400 are very tight fitting.

-K
Mar 04, 2013, 06:26 PM
Custom quad builder
tech69x's Avatar
Over time I have found this to happen the way I fixed it was to take some thin fome and put it over the tab's then tighten the screws back
Mar 04, 2013, 06:31 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by Pablochopper
There seems to be a little slop in the v assembly where it meets the tail in my 400. Is that normal? Anyone else deal with this and come up with a fix?
Did it came from me?
Picture?
Mar 04, 2013, 06:40 PM
Custom quad builder
tech69x's Avatar
Quote:
Originally Posted by Dialfonzo
Did it came from me?
Picture?
Come


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Bledi-DiaLFonZo Copter VTail HUNTER 400 CANOPY + Addons Innerbreed Multirotor Drone Talk 42 Sep 20, 2013 09:41 PM