New Products Flash Sale
Thread Tools
Old Nov 22, 2012, 11:44 AM
DoctorAudio is offline
Find More Posts by DoctorAudio
Some call me the other guy!
DoctorAudio's Avatar
CF is so exspensive!
the kit will be like 150 bucks.
Most of those CF frames on the market are really made in China for pennies on the dollar!
But great CF cost about 5 times more than the G10.
Sign up now
to remove ads between posts
Old Nov 22, 2012, 11:46 AM
Dialfonzo is offline
Find More Posts by Dialfonzo
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
If it's a low part number it can be done..
With carbon tube etc.

But yes.. it will be more expensive and is something i would not do on FPV
RCG Plus Member
Old Nov 22, 2012, 01:29 PM
Alwayscrash is offline
Find More Posts by Alwayscrash
"you'll play to live "
Alwayscrash's Avatar
ok, too much $ then! i'll stay with stock Eric's frame.Wating for his idea of newer design which is coming soon!
AC
Old Nov 22, 2012, 04:32 PM
DoctorAudio is offline
Find More Posts by DoctorAudio
Some call me the other guy!
DoctorAudio's Avatar
Dude I talk to him everyday.
I can be a pain in the arse.
I know he will tell you the same.
I get and idea and some of them turn out great and some don't make it pass the front door.

But Eric is the man, I feel great to be able to talk to someone with the talents he has!
Thanks my friend and confident! Dailfonzo is the Man!
Happy Holidays guys!
Old Nov 22, 2012, 06:13 PM
goodhumormarc is offline
Find More Posts by goodhumormarc
figuring it out...sort of!
goodhumormarc's Avatar
Happy holidays!
Old Nov 22, 2012, 08:06 PM
elliott000 is offline
Find More Posts by elliott000
Registered User
Hey guys, Pretty much have my frame lined up, I need a controller though...
I have already
Naza, CC3d, KK2.0

are any known to fly well?

Also I went the 500mm version, to swing 9 or 10 inchers, I may FPV it.... Any motors that really kick ass on it ?

Thanks
Old Nov 22, 2012, 08:09 PM
Dialfonzo is offline
Find More Posts by Dialfonzo
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by elliott000 View Post
Hey guys, Pretty much have my frame lined up, I need a controller though...
I have already
Naza, CC3d, KK2.0

are any known to fly well?

Also I went the 500mm version, to swing 9 or 10 inchers, I may FPV it.... Any motors that really kick ass on it ?

Thanks
If you want high end motor ask Mark at www.flitelab.com he sell T-Motors
And for FC if you want to go Multiwii look HERE

(i have one for you if you want)
RCG Plus Member
Old Nov 22, 2012, 08:23 PM
TruckBasher is offline
Find More Posts by TruckBasher
Registered User
TruckBasher's Avatar
I have 500 version on old CC (not CC3d) and with the correct mixing. Im using 10" prop but I dont do 3D and my FPV skills is not that good yet. My 500 size is the one with the thicker plate on tail. One thing that I know most say is that it doesnt matter if the vtail is balanced dead center on the FC but I find thta it flies smooth if its balanced on the FC center x and y axis. I used the camera plate in front to mount cam or battery for both 500 and 400.

My 500 is going some morphing so I havent flown it in a while.
Old Nov 22, 2012, 08:31 PM
elliott000 is offline
Find More Posts by elliott000
Registered User
Sounds promising, for 20 bucks i might grab the multi just for shits n gigs
Old Nov 22, 2012, 08:32 PM
tech69x is offline
Find More Posts by tech69x
Custom quad builder
tech69x's Avatar
Quote:
Originally Posted by elliott000 View Post
Hey guys, Pretty much have my frame lined up, I need a controller though...
I have already
Naza, CC3d, KK2.0

are any known to fly well?

Also I went the 500mm version, to swing 9 or 10 inchers, I may FPV it.... Any motors that really kick ass on it ?

Thanks
The kk 2.0 flys very well with this mix
V tale
Mine is finally up and running with the kk2... just some minor tweaking now...had to change some very random things to get a good mix....

again my setup is a kk2 with 750 kv motors 10x4.7 props, and 3 cell battery on the 400 frame...hovers around 55% throttle...this may save some people some trouble if they have a similar setup..

So initial changes... flip all prop/motors directions to (from looking over head) M1 front left is CCW, M2 front right is CW, M3 rear left is CW, and M4 rear right is CCW.

set the kk2 to VTail.. calibrate your sensors... and start with the mixer settings

CH1:

Throttle: 100
Aileron: -100
Elevator: 100
Rudder: -40
Offset: 0

CH2:

Throttle: 100
Aileron: 100
Elevator: 100
Rudder: 40
Offset: 0

CH3:

Throttle: 95
Aileron: 0
Elevator: -100
Rudder: 100
Offset: 0

CH4:

Throttle: 95
Aileron: 0
Elevator: -100
Rudder: -100
Offset: 0

Now some rough PI values (mainly just a starting point)

Roll:

P gain:55
P limit:90
I gain:30
I limit:20

Pitch:

P gain:30
P limit:90
I gain:30
I limit:20

Yaw:

P gain:40
P limit:20
I gain:20
I limit:20
Old Nov 22, 2012, 08:36 PM
tech69x is offline
Find More Posts by tech69x
Custom quad builder
tech69x's Avatar
Flying with the kk
Hunter V-Tail (9 min 6 sec)
Old Nov 22, 2012, 08:43 PM
elliott000 is offline
Find More Posts by elliott000
Registered User
Quote:
Originally Posted by tech69x View Post
The kk 2.0 flys very well with this mix
V tale
Mine is finally up and running with the kk2... just some minor tweaking now...had to change some very random things to get a good mix....

again my setup is a kk2 with 750 kv motors 10x4.7 props, and 3 cell battery on the 400 frame...hovers around 55% throttle...this may save some people some trouble if they have a similar setup..

So initial changes... flip all prop/motors directions to (from looking over head) M1 front left is CCW, M2 front right is CW, M3 rear left is CW, and M4 rear right is CCW.

set the kk2 to VTail.. calibrate your sensors... and start with the mixer settings

CH1:

Throttle: 100
Aileron: -100
Elevator: 100
Rudder: -40
Offset: 0

CH2:

Throttle: 100
Aileron: 100
Elevator: 100
Rudder: 40
Offset: 0

CH3:

Throttle: 95
Aileron: 0
Elevator: -100
Rudder: 100
Offset: 0

CH4:

Throttle: 95
Aileron: 0
Elevator: -100
Rudder: -100
Offset: 0

Now some rough PI values (mainly just a starting point)

Roll:

P gain:55
P limit:90
I gain:30
I limit:20

Pitch:

P gain:30
P limit:90
I gain:30
I limit:20

Yaw:

P gain:40
P limit:20
I gain:20
I limit:20
Thanks tech. Is there pc software for the kk or are we stuck with lcd only?
Old Nov 22, 2012, 08:47 PM
Dialfonzo is offline
Find More Posts by Dialfonzo
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Always fun to see that thing fly..
Thanks..
RCG Plus Member
Old Nov 22, 2012, 08:48 PM
TruckBasher is offline
Find More Posts by TruckBasher
Registered User
TruckBasher's Avatar
Ohh forgot to say KK board also flies well almost with default gains its flyable. Of course pilot preference may differ

here is a small vid in a very small room (400 size with KK board)
DialFonzo Bledi VTAIL KK Board with LED lights (1 min 13 sec)
Old Nov 22, 2012, 09:12 PM
Dialfonzo is offline
Find More Posts by Dialfonzo
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by TruckBasher View Post
Ohh forgot to say KK board also flies well almost with default gains its flyable. Of course pilot preference may differ

here is a small vid in a very small room (400 size with KK board)
http://www.youtube.com/watch?v=HgWMZ...3&feature=plcp
Indoor Night flying..
You have serious nerve..
RCG Plus Member


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Bledi-DiaLFonZo Copter VTail HUNTER 400 CANOPY + Addons Innerbreed Multirotor Talk 42 Sep 20, 2013 10:41 PM