Thread Tools
Mar 30, 2012, 03:03 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by Bledi
No Johnny was present at the begging of the developpement. He is number 0
Mouahaha.. He will like that..
Sign up now
to remove ads between posts
Mar 30, 2012, 03:06 PM
Registered User
Bledi's Avatar
He is not a number, he is a Free man ...
Mar 30, 2012, 03:55 PM
Multirotor Builder!!!!!
Ok guys, have some more questions before I build this thing up. I have 28 m motors, and 18 amp esc's which I just found out will not fit inside the frame. I also have some 10 and 12 amp esc's I know they will fit but I am not comfortable running those with the 28 m. motors. Now I also have some 20-50 I think that re the smaller KDA motors. my question is will those motors with 8 inch props lift the frame. I have used those with 10 amp esc's and they work good. and I would like to use them, but would also like some input first . Also I got my quadrino all set up to go on the frame.
Mar 30, 2012, 03:58 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by tc3wins
Ok guys, have some more questions before I build this thing up. I have 28 m motors, and 18 amp esc's which I just found out will not fit inside the frame. I also have some 10 and 12 amp esc's I know they will fit but I am not comfortable running those with the 28 m. motors. Now I also have some 20-50 I think that re the smaller KDA motors. my question is will those motors with 8 inch props lift the frame. I have used those with 10 amp esc's and they work good. and I would like to use them, but would also like some input first . Also I got my quadrino all set up to go on the frame.
I use turnigy 10A ESC on my Crazy2Fly with emax 2822 8" prop no problem..
Mar 30, 2012, 04:19 PM
Registered User
Orange on the way .. some day .. 2-3 weeks out..

Quote:
Originally Posted by Dialfonzo
We are working on getting colors from the supplier.. but no word yet.
Mar 30, 2012, 04:22 PM
Registered User
I dont think I took weight of the 400, .. have few done.. hardware should be here today.. I'll build another and weigh it ..

500 the same. :-( I cant recall what ti was. I think it was the same as my spider.. 14oz..

Will confirm soon..


Quote:
Originally Posted by Tres Wright
Sorry if you posted this already (I looked and didn't see it), but what is the bare frame weight on the 400 size?

Also just curious, are there colors available other than black/ red/ yellow? I already ordered mine in black/ red, but was just wondering for future frame orders
Mar 30, 2012, 04:23 PM
Registered User
I get 10 votes for I'll see if we can get it..

Quote:
Originally Posted by Bledi
Pink ?
Mar 30, 2012, 04:29 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
300g for the 500mm
Picture is on first post...!!!
Mar 31, 2012, 03:49 AM
Multirotor Builder!!!!!
Well guys I got the frame built I have a few pics I will post in a few. it is not pretty at the moment, I will worry about that once i get her flying and tuned. but there lyes the problem. I got everything hooked up and I am only getting beeps out of the motors , so I am trouble shooting now. will post more soon.
Mar 31, 2012, 05:52 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by tc3wins
Well guys I got the frame built I have a few pics I will post in a few. it is not pretty at the moment, I will worry about that once i get her flying and tuned. but there lyes the problem. I got everything hooked up and I am only getting beeps out of the motors , so I am trouble shooting now. will post more soon.
Some esc need a lower min-command in sketch.
Mar 31, 2012, 05:58 AM
Multirotor Builder!!!!!
Ok she is put together and Yes she flys. and quite good I might add. Here are some pics. granted I have not mounted everything where I want yet. also I am uploading vieo as I type.
I fond that using 10 inch props in the fron and 9 inch in the rear are working best. with 8 inch props I was at above half throttle for hover.

And here is the video

hunter V-tail test flight .AVI (1 min 37 sec)
Mar 31, 2012, 06:03 AM
Registered User
Bledi's Avatar
Yes great !!! Just add some P and I and it will be a rock
Mar 31, 2012, 06:10 AM
Multirotor Builder!!!!!
also this frame is running with the Afro control NAZE 32 board. which some have asked about.

Bledi- Yea I need to do some adjustments, aand I have to clean her up and add led's which I will tomorrow night. Although I am happy with it. and now I also need to order some more props. LOL lets just say I hit a few things in the Garage. while doing initial tests.
Mar 31, 2012, 06:15 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Wow..

Thanks for showing us ...
Look like you solve your Beeping ESC problem

You could try the alternate tail mounting..?
HERE
Mar 31, 2012, 06:16 AM
Multirotor Builder!!!!!
I may try that.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Bledi-DiaLFonZo Copter VTail HUNTER 400 CANOPY + Addons Innerbreed Multirotor Drone Talk 42 Sep 20, 2013 09:41 PM