Thread Tools
Mar 25, 2012, 07:24 PM
KFC
KFC
Blue Foam Master!!!
KFC's Avatar
Question

Prop advice


So about a month ago I bought a Spartan as a noob FE boat. I have since beefed up the cooling system and am pretty satisfied so far with the performancse. My problem at this point is that a buddy of mine also got one and when we get together next month at an undisclosed R/C event, I need to have the faster boat. Can anyone offer me some advice on a substitute prop that might give me the edge, even if it shortens the runtime. Should I go with a 3 bladed prop or a 2 bladed prop? Beryllium copper or plastic? Basically how do you go about selecting props for boats. (I know how to do this for airplanes, but I get the impression that boats are a whole different kind of animal). What I really want to walk away with here is an understanding of how to select a prop for a given power system, so explanations of the reasons behind any suggestions would be greatly appreciated.
Sign up now
to remove ads between posts
Mar 25, 2012, 07:32 PM
I feel the need for speed!
scorpion1's Avatar
If you are running the new castle system i would give an s220 a try.

http://www.offshoreelectrics.com/pro...i-prather-s220
Mar 25, 2012, 09:03 PM
Registered User
Beryllium same as the Prather prop, as that SS one is out of stock balancing is the same as for aircraft and sharpening is the best you can with what you have (keep kids away from the dust or wet sand), once you cut yourself as you install or remove it its perfect.
Mar 25, 2012, 09:17 PM
KFC
KFC
Blue Foam Master!!!
KFC's Avatar
The electronics are all Castle and I bored out the water pickup and installed large bore tubing through the whole thing to help keep it cool.

Is there a formula or something that you guys use to pick the props, or is it just experience?
Mar 25, 2012, 10:33 PM
I feel the need for speed!
scorpion1's Avatar
Quote:
Originally Posted by KFC
The electronics are all Castle and I bored out the water pickup and installed large bore tubing through the whole thing to help keep it cool.

Is there a formula or something that you guys use to pick the props, or is it just experience?
There are loose parameters for recommendations, but i mainly shoot from the gut now.

Think about all the different variables in choosing a prop.

Hull length
Hull width
Hull type
Motor KV
Motor size
# of cells
Total rpms
Mar 26, 2012, 08:49 AM
KFC
KFC
Blue Foam Master!!!
KFC's Avatar
Will I get more stability (less rocking at speed) with a 3 bladed prop? Would I need to go to a smaller diameter?
Mar 26, 2012, 12:14 PM
Registered User
wparsons's Avatar
Rocking back and forth gently comes from the hull riding higher out of the water, which just comes with speed. If its rolling to one side harder, or the transom is jumping around then it might be better with a smaller diameter prop. A higher pitch, or 3 blade will likely help that a bit.
Mar 27, 2012, 08:37 AM
Registered User
Some good advice and a good prop chart . www.offshoreelectrics.com/propeller-chart.php
Just remember to start out small and work your way up .


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Various prop advice please Markx Racing Boats - Internal Combustion 13 Mar 16, 2012 05:38 AM
Discussion need advice. prop for large scale electric warbird. Matt Gunn Power Systems 7 Mar 12, 2012 02:56 PM
Discussion Y6 prop advice Dolby Aerial Photography 3 Nov 12, 2011 05:01 AM
Discussion prop advice: calm day vs. windy day props? protocol Power Systems 6 Oct 22, 2011 10:13 PM
Discussion Props advice please on there sizes NEAGRON Beginner Training Area (Aircraft-Electric) 11 Sep 27, 2011 01:38 AM