Stevens Aero Cap.. few questions.. - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 21, 2003, 10:17 PM
Fly it like you stole it..
Tram's Avatar

Stevens Aero Cap.. few questions..

Hey guys..

I've been thinking of what to power this with..

I have a 300 and a 350 Razor.. I'd like to run an Etec 3S 1200 or TP 3S 2100...

What setups would you reccomend for each motor?
Sign up now
to remove ads between posts
Oct 22, 2003, 11:37 AM
Truss-Loc Monkey
Stevens AeroModel's Avatar
RZ-300 C gearbox 9x6 APC E prop - or 10x6 GWS HD prop... 3S1P 1200ET should pull 11A on the bench at sea level... Worked great for me at SEFF.

RZ-300 D gearbox 10x6 APC E Prop or 3blade 9x7 prop from hobby lobby / flying styro... Again - worked well at SEFF. Just under 11.5A on the bench... oh yeah... 3S1P 1200ET I'd bet you could swing the 11" HD prop on this setup.... but torque would be huge...

My preference is the C gearing and smaller 9x6 prop - I'd love to try the GWS 9x5HD prop there as well... The 3 blade prop just looks too cool on there and the 3 blade GWS spinner flows with the cowl very nicely. Vertical is pretty much a non-issue with both setups... You'll have plenty

Hope this helps.