What to do with your new Phx 10
We've sent product alert anouncements to our dealers and users that have ordered directly from us, and want to clarify a few things here.
All of the new style Phx 10's that went out have a software issue that was not caught by in-house testing or our beta testers. The issue stems from the use of a new microprocessor chip that handles memory differently than previous chips, and required moving some of the programming to different areas to avoid erasure.
It takes a very specific procedure to activate the problem: The controller will erase it's flash memory if and only if, it is powered up, then unplugged during or slightly after the initialization tone (first beep). This is the only way to cause the problem to appear. If you don't immediately unplug the controller after plugging in, it will allways function normally.
We are asking users to send them in to receive the newly configured programming to resolve the issue completely if you wish.
All units shipped from Castle after Friday 10/17, as well as all units of the old (bigger) style, have the correct programming and are unaffected by this notice.
You may contact me directly if you have further questions or concerns.
Last edited by Shawn Palmer; Oct 21, 2003 at 02:22 PM.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Question||What to do with my new 4S 3P Prolite ?||Al P||Batteries and Chargers||0||Mar 08, 2006 07:27 PM|
|What to do with your old parkflyer parts||Rip-N-Burn||Parkflyers||3||Dec 28, 2004 05:02 PM|
|Electric field box (or what to do when your new kit didn't show up)||LAN||Batteries and Chargers||1||Jun 05, 2004 04:39 PM|
|What to do with your ACE Simple series Wing||Cybear_GBG||Parkflyers||14||Aug 24, 2003 02:58 AM|
|What to do with my new geared Endoplasma motor?||JStory||Electric Plane Talk||7||Jul 02, 2002 08:17 AM|