grayson microjet v3 question... - RC Groups
Thread Tools
Mar 16, 2012, 11:52 AM
Registered User

grayson microjet v3 question...

I just bought a v3 and I already have a 40A esc and a 1- lipo BATTERY 2200MAH 11.1V 20C. will the battery and esc work with this V3 motor? If not what battery and esc combo would I want for this v3? BTW it is going on my wild hawk.
Sign up now
to remove ads between posts
Mar 16, 2012, 12:17 PM
Wake up, feel pulse, be happy!
Piece's Avatar
They'll work together, yes. Make sure you use the right prop (~6x4 for that motor).

You might find you want a slightly smaller, lighter battery to keep overall weight down, but the one you have will still work fine.
Mar 16, 2012, 12:36 PM
Registered User
Great, Thanks! So the bigger the esc the better?
Mar 16, 2012, 12:42 PM
Wake up, feel pulse, be happy!
Piece's Avatar
Not necessarily. An ESC that's bigger than necessary has no negative effect on the power system and will usually run a little cooler, but it'll also be heavier. At some point the extra capacity isn't worth the additional weight.

For your plane, you won't notice the extra couple grams.
Mar 16, 2012, 01:46 PM
Registered User
Thank you C4H10.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Max prop on Grayson Microjet V3? prelator Power Systems 9 Aug 21, 2011 07:11 PM
Wanted Grayson Hobby Microjet V3 motor spencer6891 Aircraft - Electric - Power Systems (FS/W) 1 Jan 17, 2011 09:41 PM
Sold Grayson Microjet V3 Motor and ESC Hightray Aircraft - Electric - Power Systems (FS/W) 1 Oct 01, 2010 10:21 AM
Mini-Review Grayson MicroJet V3 (39g, ~2300kv) Dr Kiwi Power Systems 24 Aug 09, 2010 12:44 PM
Discussion Grayson MicroJet V3 motoror similar Angus Sugna Power Systems 3 Mar 24, 2010 01:24 PM