Throttle and Choke arms for Gas Engine Carbs. - RC Groups
Thread Tools
This thread is privately moderated by unclegeorge, who may elect to delete unwanted replies.
Mar 15, 2012, 10:49 PM
Trader Rating: 309
Registered User
unclegeorge's Avatar

Throttle and Choke arms for Gas Engine Carbs.

If you have ever stuggled with trying to make a new arm for your throttle or choke on your gas engine carborator out of nose gear steering arms---Here finally is a solution!

Note that there is a difference in the height of each are so they can pass each other without any interferrence.

They are CNC machine of 6061-T6 Aluminum so they can be taped for a 4-40 ball or you can use a nylon clevis if you like for hook up.

These arms are build to slide on to the brass shafts on your carborator and are held in place with 2 set screws. I recommend that you file a flat on the shaft after determning what angle is best for hook up and then use thread lock on the set screws.

1. CNC machined 6061-T6 aluminum in a brilliant red anodized finish.
2. Perfect for all carbs using standard 3/16" (0.1875") throttle and choke shafts.
3. May be drilled out for larger carbs using 7/32" (0.2187") throttle or choke shafts.
4. Offset heights provide enough linkage clearance for your servo mounting preferences.
5. The multiple 1/16" arm holes located at 1/2", 3/4" and 1" provide mounting flexibility and changes in mechanical advantage.

Sold in pairs only. One tall and one short. Includes 4mm set screws

I sell them for $14.50 a pair plus $2.00 S&H by first class. Priority mail is now $6.00.

Please give me your mailing address and please refer to the item you are buying in the “Subject line” along with your mailing address in your Pay Pal purchase. My account in Pay Pal is under

Uncle George
Sign up now
to remove ads between posts
Mar 15, 2012, 10:52 PM
Trader Rating: 198
Registered User
livinma1's Avatar
Will this work on a DLE 55 ?
Mar 15, 2012, 10:57 PM
Trader Rating: 309
Registered User
unclegeorge's Avatar
Yes you will love the easy installation too!
Last edited by unclegeorge; Mar 15, 2012 at 11:15 PM.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Throttle and Chock arms for gas Carbs. unclegeorge Aircraft - Fuel - Engines and Accessories (FS/W) 4 Mar 12, 2012 03:44 PM
Sold NEW! Choke and Throttle arms for Gas Engines! unclegeorge Aircraft - Fuel - Engines and Accessories (FS/W) 3 Feb 14, 2012 07:03 PM
Sold New! Throttle and Choke arms for Carborator unclegeorge Aircraft - Fuel - Engines and Accessories (FS/W) 9 Feb 12, 2012 11:55 AM
Help! How do you assign the choke on gas engine on the radio? fltekdiver Fuel Plane Talk 4 Apr 08, 2010 10:17 AM
For Sale Throttle arms for gas engines ken lambert Aircraft - Fuel - Airplanes (FS/W) 5 Aug 01, 2005 10:38 PM