Thread Tools
Mar 14, 2012, 06:00 PM
Registered User
Discussion

Unexplained interference - video attached - Any Ideas?


I have just completed a Osirus V2 foamy.

I am using a Futaba R6106HF 6-Channel 2.4GHz FASST receiver with the case removed.

I am getting intermittent interference as shown in the attached video. The interference comes and goes.. doesnít matter if Iím inside or outdoors. I can still manipulate all of the controls while the interference is occurring.

Any suggestions on what might be causing this?

thanks

John

Interference (0 min 29 sec)
Sign up now
to remove ads between posts
Mar 14, 2012, 06:03 PM
Registered User
I forgot to add that only the aileron servo is effected...
Mar 14, 2012, 06:05 PM
Surface, Air & Water Rc Toys..
freechip's Avatar
Swap it around in the rx. see after swapping the elevator servo does this. If it's still the aileron then chances are its the servo itself.
Mar 14, 2012, 07:46 PM
Oxford Panic
AndyOne's Avatar
Also try just disconnecting the aileron servo and do the same test again to see if the interference between channels is in the servo or not. If it still happens with the aileron servo unplugged then it's not the servo.

A.
Mar 14, 2012, 10:17 PM
Registered User
Move your ESC as far as possable from the RX and see if it sill does it.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Looking for an aluminum case for DJI Flame Wheel F550, any ideas? jasper7821 Multirotor Drone Talk 3 Jun 12, 2015 09:23 PM
Help! Help finding the source for video interference sharonx FPV Talk 20 Mar 21, 2012 01:39 PM
Discussion EMI Interference? Video Not Playing Murocflyer Aerial Photography 5 Feb 25, 2012 11:06 PM
Cool Video cam attached to Heli Rotor blade...So what does it look like sweatyfingers Aerial Photography 2 Sep 18, 2011 01:05 AM
Help! Gas Engine RF interference with old JR servos -- any ideas? Illini_Rob Engines 9 Nov 16, 2010 07:50 AM