Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Mar 14, 2012, 05:45 PM
bigfoot216 is offline
Find More Posts by bigfoot216
Registered User
Discussion

Looking for radio suggestions for this plane...


I am looking at the 5 Channel AirField RC 55" Sky Trainer.

I would like a 6 ch tx that is inexpensive and that I can use with other planes. I would need one that can hook up via buddy cord, and would like one that I don't have to hook to a pc to change servo settings.

Thanks....
Sign up now
to remove ads between posts
Old Mar 14, 2012, 06:18 PM
freechip is offline
Find More Posts by freechip
Surface, Air & Water Rc Toys..
freechip's Avatar
...
Last edited by freechip; Mar 15, 2012 at 06:43 AM.
Old Mar 15, 2012, 12:17 AM
bigfoot216 is offline
Find More Posts by bigfoot216
Registered User
Yikes! I need Cheep! I was thinking around $50?? is it possible? I know HK has a few 6ch tx for under $30, but I really don't know much about them. <<---n00b
Old Mar 15, 2012, 02:29 PM
bigfoot216 is offline
Find More Posts by bigfoot216
Registered User
...?
Old Mar 15, 2012, 02:52 PM
dedStik is online now
Find More Posts by dedStik
Redacted per NSA "suggestion"
dedStik's Avatar
If spending $60 and buying from HK just go for the Turnigy x9.

Reviews:

http://www.rcmodelreviews.com/turnigy9xv2review.shtml

http://www.rcmodelreviews.com/turnigy9xv2.shtml

https://www.rcgroups.com/forums/show....php?t=1446461

I'm not really looking for another TX but at sub $100 for a 9 channel, I've gone ahead and ordered one.
Old Mar 15, 2012, 06:00 PM
gwinhh is offline
Find More Posts by gwinhh
Registered User
Tower has some good deals for #120 or so.

howell
Old Mar 15, 2012, 06:17 PM
Kimber is offline
Find More Posts by Kimber
Hobby King Hater
Kimber's Avatar
Tower has the Tactics for $99, 6ch, no servos, no battery. It comes with a battery harness
and rec. The rec's are $29 or two for $57. The only problem is, they only interface with
another Tactic for trainer mode. You can get a 4ch for $79. If you figure the rec at $29,
the trainer box is only $40. When the cords are from $8 to $40, not that bad a deal.

The trainer interface is wireless. The transmitters are programmable, to some degree.
V-tail, aileron mixing,

Link to manual:

http://manuals.hobbico.com/tac/tacj2600-manual-v1_2.pdf

The only down thing we have found is that the trim, digital, resets itself
every time you turn the power off. So you need to adjust the plane real
close or write down the setting on the plane. No big deal, but something
else that could go wrong.

Brad is going to put a sticker on the bottom of the wing, center, wtih
the servo directions and trim settings. We are going to have four planes
with one transmitter. We hope.......

I know this is more $$ than you were looking at, put bang for bucks, not bad.

All our FM stuff is now in boats BTW. Both fields here are 2.4 only now.
Old Mar 16, 2012, 08:47 AM
bigfoot216 is offline
Find More Posts by bigfoot216
Registered User
Quote:
Originally Posted by dedStik View Post
If spending $60 and buying from HK just go for the Turnigy x9.

Reviews:

http://www.rcmodelreviews.com/turnigy9xv2review.shtml

http://www.rcmodelreviews.com/turnigy9xv2.shtml

https://www.rcgroups.com/forums/show....php?t=1446461

I'm not really looking for another TX but at sub $100 for a 9 channel, I've gone ahead and ordered one.
I really like the Turnigy, but it won't be in stock for 2-3 weeks...
Can anyone suggest one like the Turnigy x9?
Last edited by bigfoot216; Mar 16, 2012 at 03:57 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Looking for some performance suggestions for my Y-6 jcaywood Multirotor Talk 6 Mar 14, 2012 12:27 PM
Discussion Looking for suggestions... Garret H 3D Flying 8 Mar 11, 2012 10:30 PM
Discussion New to FPV / looking for suggestions Ernie34 FPV Talk 1 Mar 11, 2012 04:27 PM
Discussion Looking for a model name for this RC Plane TechnoFinder Foamies (Scratchbuilt) 2 Jan 21, 2012 06:13 AM
Discussion Newbie building quad...looking for radio alternatives to dx8...suggestions? jtbullet Multirotor Talk 6 Oct 06, 2011 03:28 PM