Thread Tools
This thread is privately moderated by tosjduenfs, who may elect to delete unwanted replies.
Mar 13, 2012, 12:04 AM
Trader Rating: 12
Registered User
For Sale

Mini X/+ Quad Frames for sale


These quad frames are made from 1/16" black G10.

All together the frame is approximately 60g.

Motor to motor is 8" adjacent and 11.25" crosswise.

It can accommodate props up to 7 inches.

The frame has holes for CC board (30.5mm square) and for standard KK (45mm square) and the boards can be mounted in + and x configurations.

Comes with all nylon hardware.

Built in motor mounts with standard 16mm and 19mm mounting pattern.

I'm asking 22$ Shipped ConUS

I have enough nylon hardware to make 2 of these. If there is interest in them I will gladly buy more hardware and make as many as people want.

If you have a mill and would like to make it yourself I'm more than happy to distribute the DXF.

Regards,

Mike
Last edited by tosjduenfs; Mar 13, 2012 at 11:28 AM.
Sign up now
to remove ads between posts
Mar 13, 2012, 08:59 AM
Trader Rating: 182
Registered User
Joe 1320's Avatar
Any chance of doing replacement arms too? The weak spot will be the motor arm just after the brace. If it's like any other quad, that will be the beaking point (which is good...... better than other parts).
Mar 13, 2012, 09:54 AM
Trader Rating: 12
Registered User
Yes, I'd be able to make replacements for a couple bucks. That is why I prefer to have seperate pieces for each arm rather than having a frame cut from a single piece.

As far as the arm goes it is quite tough and I tried to keep the length of the arm after the brace to a minimum to reduce the amount of leverage that could be generated in a crash.
Mar 13, 2012, 01:35 PM
Trader Rating: 12
Registered User
There is one frame left for sale. After it is sold I can still make more so long as people ask for them.
Mar 13, 2012, 04:58 PM
Trader Rating: 11
Dreamer
International shipping??
Mar 13, 2012, 10:14 PM
Trader Rating: 12
Registered User
Kaz,

I'm fine with that lLet me check what it would cost.

Mike
Mar 13, 2012, 11:09 PM
Trader Rating: 181
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
Very cool..
Mar 13, 2012, 11:36 PM
Trader Rating: 12
Registered User
Thanks G-unit. I've decide to get some more nylon hardware for these. I should have enough to make about 8 more.
Mar 14, 2012, 10:02 PM
Trader Rating: 12
Registered User
I've got three left ready to ship. PM me.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Quad +/x Frames for sale. tosjduenfs Aircraft - Electric - Multirotor (FS/W) 9 Mar 11, 2012 09:29 PM
For Sale MSH Protos frames x 2 KrazyKoots Aircraft - Electric - Helis (FS/W) 2 Mar 02, 2012 11:54 AM
Sold BNF mini quad for sale willi_m Aircraft - Electric - Multirotor (FS/W) 0 Jan 23, 2012 11:55 AM
Sold 2 X multicopter frames for sale. Scarab and tricopter!!!! tc3wins Aircraft - Electric - Multirotor (FS/W) 3 Dec 01, 2011 08:36 AM
Discussion X Frames... Low Cost UK Frames Thepasty Multirotor Drone Talk 9 Oct 10, 2011 07:41 AM