Thread Tools
This thread is privately moderated by Sid3ways, who may elect to delete unwanted replies.
Mar 12, 2012, 03:30 PM
Trader Rating: 39
DJI Supporter
Sid3ways's Avatar
Sold

NEW Droidworx AD6-HL Mikrokopter w/full GPS/NAV and XBees


I have finished building a MK DroidWorx AD6-HL that was to be used for a potential job coming up but it doesn't look like this copter is going fit the particular request so here it goes up for sale.

Pictures in a post below
Specs:
DroidWorx AD6-HL (DW dome still has plastic on it, this is all never used)
Mikrokopter FC ME2.1 (setup for Graupner MX-20)
Mikrokopter GPS 2.1 (
Mikrokopter Navi 2.0
6x Mikrokopter BL2.0 in Hexa distribution board (used bullets at the board for easy change outs, or can be swapped to direct connection at your request)
6x AVRoto 2814 Brushless Motors
6x APC 12x3.8 Props
4S 5300 GenAce 30C Lipo

This setup is pretty much identical short of the motors that you would buy from Quadrocopter LLC. for $6481 (without the DX8).

This is programmed for Hexa and just requires your radio setup with the MK tools. If you have any questions feel free to ask.

Price:Reduced: $3850.

edit: XBees removed.
Last edited by Sid3ways; Apr 09, 2012 at 03:56 PM.
Sign up now
to remove ads between posts
Mar 12, 2012, 04:14 PM
Trader Rating: 22
My RC builds in my profile.
daign's Avatar
Sid3ways I'd wish you'd keep a picasa/flickr page of your builds. Would love to see them all! Good luck with this sale!
Mar 12, 2012, 04:48 PM
Trader Rating: 10
No this is not a "model" 1911!
The Big One's Avatar
good stuff...... can't wait to see the pics especially of what's under the hood... GLWS!
Mar 13, 2012, 03:08 AM
Trader Rating: 1
Registered User
red1one's Avatar

Hexacopter for Sale


Very interested and looking to purchase this week. I can also arrange direct pick up.

Please feel free to contact me direct: 734-674-2331. Brad

Or email red1one@comcast.net
Mar 13, 2012, 07:25 PM
Trader Rating: 39
DJI Supporter
Sid3ways's Avatar
I've responded to all parties, they wanted pictures and a found a couple of the build process on my laptop of the copter being 90% complete, just needed motors mounted at that point. I'll have updated pics like I said when I get home in a few days. Picture with the lid still has the wrapper on it that is why it looks not smooth.
Mar 13, 2012, 08:17 PM
Trader Rating: 199
Hold Down The West!
cryhavoc38's Avatar
looks nice!

two questions.

the frame on the right..what brand/make is that one.

second question.

you mentioned in the original post that you used bullets on the speedo's for a quick change out, but the pic on the left shows direct soldering..were the bullets added later?

thanks
Mar 13, 2012, 09:09 PM
Trader Rating: 10
No this is not a "model" 1911!
The Big One's Avatar
Quote:
Originally Posted by cryhavoc38 View Post

the frame on the right..what brand/make is that one.
I'd say an Xaircraft Hexa
Mar 17, 2012, 03:25 PM
Trader Rating: 22
My RC builds in my profile.
daign's Avatar
man thats some high grade snuff
Mar 19, 2012, 09:20 AM
Trader Rating: 39
DJI Supporter
Sid3ways's Avatar
Copter is back up on the market so bumping it back up with a slight price drop. From $4150 down to $4050.
Mar 19, 2012, 09:22 AM
Trader Rating: 39
DJI Supporter
Sid3ways's Avatar
Quote:
Originally Posted by cryhavoc38 View Post
looks nice!

two questions.

the frame on the right..what brand/make is that one.

second question.

you mentioned in the original post that you used bullets on the speedo's for a quick change out, but the pic on the left shows direct soldering..were the bullets added later?

thanks
1. Frame on the right was a XA Hexa frame.
2. Bullets are about 3 inches down the line from the ESCs, they are just tucked away you can't see them.
Apr 09, 2012, 02:50 PM
Trader Rating: 39
DJI Supporter
Sid3ways's Avatar
I forgot to post the picture up of the copter, it is programmed for a Hexa and basically just needs your radio setup and she's ready to fly!
Jul 17, 2012, 03:20 PM
Trader Rating: 3
AD6-HL, MK3638, Pro Mount-200
Panama TJ's Avatar
Quote:
Originally Posted by Sid3ways View Post
I forgot to post the picture up of the copter, it is programmed for a Hexa and basically just needs your radio setup and she's ready to fly!
Is this still for sale?

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion I need some help; Droidworx ADX-4-HL or AD-6-HL ? Patrick R Aerial Photography 14 Jun 27, 2012 09:13 PM
Wanted Droidworx AD6 HL mmalik4 Aircraft - Electric - Multirotor (FS/W) 4 Mar 12, 2012 03:51 PM
Wanted Droidworx AD4 or AD6 mmalik4 Aircraft - Electric - Multirotor (FS/W) 0 Jan 12, 2012 12:21 PM
Discussion Droidworx ADX3 or AD6 Hexa? cougar2465 Multirotor Talk 0 Dec 21, 2011 07:13 AM
Discussion AD6-HL Smoothing Flight Panama TJ Multirotor Talk 0 Oct 22, 2011 07:38 PM