Odds & Ends, Custom Parts, Spring Cleaning - RC Groups
Thread Tools
This thread is privately moderated by 500Driver, who may elect to delete unwanted replies.
Mar 08, 2012, 07:45 PM
Trader Rating: 47
EC-135 Driver
500Driver's Avatar

Odds & Ends, Custom Parts, Spring Cleaning

Decided it's time to clean out my spare parts / project bin.

I know there is someone on here that will be able turn these bits into a large custom quad or octo. That was my original plan but just have too many other projects.

The frame is carbon fiber and was originally from PhotoShip One...I believe it was a prototype he was working on.

The landing gear arches are also carbon fiber and were a pair of extended landing gear made by Droidworx. They came off a crashed Droidworx machine and the damaged section has been cut off. The carbon fiber tubes are also from the Droidworx landing gear and all are cracked...with some CA glue though I believe they could be repaired.

The pair of center plates are from a Gaui 330 (the plate on the right has some damage)

The other plate was custom made to fit the frame (hole spacing) to be used as a battery tray / landing gear attachment point...it is a lightweight G10 material.

The triangular plates are G10 or some other type of plastic...not entirely sure...but they are from a PhotoShip One Mktr camera gimbal.

Motor mount plates are carbon fiber and will fit larger motors (IE Mikrokopter 3536)

The boom blocks are aluminum and clamp to Gaui 550 helicopter tailbooms.

And enough hardware there to mount motors, clamp the clamps, a few different sized stand-offs, etc. as you see pictured.

Asking $250 shipped to a U.S. address.


Sign up now
to remove ads between posts
Mar 08, 2012, 08:12 PM
Trader Rating: 63
manual flying apologist
Adidas4275's Avatar
Mar 08, 2012, 09:52 PM
Trader Rating: 8
what is the diameter of the boom...
Mar 09, 2012, 08:44 AM
Trader Rating: 47
EC-135 Driver
500Driver's Avatar
SOLD - Thanks RCG!

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold odds and ends car parts gmcmanv6 Cars - Cars and Parts (FS/W) 1 Aug 19, 2011 07:51 PM
For Sale odds and ends OS 20 FP, Magnum Pro 40 parts bushpilotx1 Aircraft - Fuel - Engines and Accessories (FS/W) 0 Jul 28, 2011 06:38 PM
Wanted just a few odds and end parts for 4G3 1 blade controller screw 1 blade grip ball ends blueindian Aircraft - Electric - Helis (FS/W) 1 Apr 10, 2011 02:12 AM
Sold Odds and ends, shop cleaning Hostage-46 Aircraft - Sailplanes (FS/W) 4 Nov 18, 2008 09:01 AM
For Sale House cleaning, some odds and ends.... physics_nut Aircraft - General - Radio Equipment (FS/W) 1 Feb 08, 2006 11:32 AM