Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Mar 06, 2012, 12:22 PM
battrackers is offline
Find More Posts by battrackers
Registered User
Discussion

Easy Glider Pro specs


Hey,

We purchased an easy glider pro for a school project, but haven't gotten it in yet and we need to attempt a SolidWorks design of it for machining.

does anyone know some of this information?

1. What is the NACA Airfoil #?
2. What is the dihedral of the wings?
3. What is the chord length at the root and at the tip?
4. What is the diameter of the 12x6 and 10x6 propellers?

Also, if someone has a SolidWorks drawing of it, that would be awesome as well.

This info will be very helpful, thank you
Sign up now
to remove ads between posts
Old Mar 06, 2012, 06:24 PM
jetcommander is offline
Find More Posts by jetcommander
Registered User
jetcommander's Avatar
Why don´t you just contact Multiplex? they´re very helpful.
Old Mar 06, 2012, 09:03 PM
battrackers is offline
Find More Posts by battrackers
Registered User
I already tried, they have none of that info unfortunately
Old Mar 06, 2012, 11:53 PM
Pete Miller is offline
Find More Posts by Pete Miller
Registered User
Quote:
Originally Posted by battrackers View Post
Hey,

We purchased an easy glider pro for a school project, but haven't gotten it in yet and we need to attempt a SolidWorks design of it for machining.

does anyone know some of this information?

4. What is the diameter of the 12x6 and 10x6 propellers?

Also, if someone has a SolidWorks drawing of it, that would be awesome as well.

This info will be very helpful, thank you
Propeller specs are Diameter x Pitch so:

12 inches and 10 inches
Old Mar 07, 2012, 02:56 AM
ArneHu is offline
Find More Posts by ArneHu
Balsa Builder. With some foam.
ArneHu's Avatar
You can download the manual here: http://www.multiplex-rc.de/en/servic...s/manuals.html


The manual is in English and German. You can find everything about Multiplex products on this sites. Very good and practical service , from a serious company.
Old Mar 07, 2012, 03:00 AM
ArneHu is offline
Find More Posts by ArneHu
Balsa Builder. With some foam.
ArneHu's Avatar
Quote:
Originally Posted by battrackers View Post
I already tried, they have none of that info unfortunately
Have you contacted Multiplex Germany? http://www.multiplex-rc.de/en/home.html
Old Mar 07, 2012, 03:56 AM
ArneHu is offline
Find More Posts by ArneHu
Balsa Builder. With some foam.
ArneHu's Avatar
The chord length on mine Easy Glider is app. 7,87" root, and 1,81" tip. Measured as best as I could.
But there should be no problem to find out the dihedral. Just mount the wings, place the model on a table. And measure the distance from the tip and down.
Last edited by ArneHu; Mar 07, 2012 at 04:08 AM.
Old Mar 07, 2012, 09:47 AM
Pete Miller is offline
Find More Posts by Pete Miller
Registered User
Arne,

As I understand it, they don't have the model, yet.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Easy Glider VS Easy Glider Pro (what's different?) MkFn Electric Sailplanes 7 Nov 17, 2011 08:42 PM
Sold Multiplex Easy Glider Pro New Condition!! johnnyrocco123 Aircraft - Electric - Airplanes (FS/W) 0 Oct 10, 2011 03:51 PM
Discussion MPX Easy Glider Pro RR or Arf ? cbinfl Sailplane Talk 1 Oct 02, 2011 04:50 AM
Found Easy Glider Pro jabomano Aircraft - Sailplanes (FS/W) 1 Sep 24, 2011 03:18 PM
Yippee! Nearly there on the Easy Glider Pro slowstick4ap Electric Sailplanes 0 Sep 09, 2011 05:05 PM