Thread Tools
Old Mar 05, 2012, 02:45 PM
eMoon is online now
Find More Posts by eMoon
I meant to do that
eMoon's Avatar
Discussion

Looking for a Flat Foamie Project


Hi All,

I did a quick search and found some potential options for what I'm looking for but:

I would like to find a set of plans or ideas for a flat foamie build to use a Hextronic 24 gram 1500Kv motor and 2s 800mAh lipos. I found some options for the motor but they all need 3s lipos. A 4-channel with ailerons would be preferred as well.

Would you guys be so kind as to point me in a direction for a 2s bird?
Sign up now
to remove ads between posts
Old Mar 05, 2012, 03:15 PM
Jsutherland8 is offline
Find More Posts by Jsutherland8
ELECTRIC R/C
Jsutherland8's Avatar

Looking for a Flat Foamie Project


I have been flying a Flatana by Great Planes w/ BL 2208/14, 1450kV and a 25 (30)Amp ESC, 3S 800mAh LIPO. This combo is ok in NO wind or indoors. The small diameter of the carbon rods lets the wing flex too much in any wind, or hard fast pullout. It has been a good plane for the price, ($35) but after 2 years and close to 100 flights it is stressed out. It took way too long to build and had poor assembly instructions. After running a beed of polyurethane glue into all the edges it was ok to fly. The RX, ESC, motor, and servoes are all ok, so I am also looking for a new body or whole plane to fly 3D with.
I got a 5.5mm 31" ws, blue foam short kit off a local club member, and have seen the same model fly at our Indoor Fly-in, and it works well. The BL2208/14 may be too much motor for this one, But I will try it and see.
There is a pic of a F-22 with mid mount motor 2800 Kv, fun but not real 3D.
Last edited by Jsutherland8; Mar 05, 2012 at 05:00 PM. Reason: add info
Old Mar 05, 2012, 05:02 PM
hankg is offline
Find More Posts by hankg
Lost but making good time
new,

Try this one... a little different but flys really well.

Regards,

Hankg
Old Mar 06, 2012, 09:12 AM
eMoon is online now
Find More Posts by eMoon
I meant to do that
eMoon's Avatar
Thank you for the suggestion. Looks nice.

Anybody else have a suggestion for comparison/discussion?

Ok, did a bit more digging and stumbled on this thread...seems like a good fit even though not a flat foam, but it's flat enough and looks way cool. https://www.rcgroups.com/forums/show...0#post11738182
Last edited by eMoon; Mar 06, 2012 at 04:11 PM. Reason: More info and post link


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Flat Foamie Series from RA Cores coreman Foamies (Kits) 167 Nov 28, 2016 09:56 PM
Question Looking for a flat 3S 11.1V LiPo with medium-high capacity.. ZSimon Batteries and Chargers 1 Sep 12, 2011 07:16 AM
Deadline extended for the flat foamie video contest Dave Lauck Site Chat 0 Sep 16, 2005 06:53 PM
New idea for flat plate foamie fuses rcmann Foamies (Kits) 0 Feb 08, 2004 01:49 PM