Thread Tools
Nov 02, 2001, 12:04 PM
Wayward Pilot
JREEVES's Avatar

Wanted: plans for Antique pusher project


I'm looking for suggestions or plans to scratch build an antique slowflyer for twin pusher N20 geared motors I have gathering dust. Something with an undercambered wing and builtup stick fuselage is what I'm thinking. Know of anything out there that fits the bill? Thanks all, Jim.
Sign up now
to remove ads between posts
Nov 02, 2001, 01:16 PM
Registered User
Rotten Robbie's Avatar
Check Cleveland. There are several plans available if you have the nerve to try it.

http://www.clevelandairline.com/ASP/LIST.asp

At least the real ones flew SLOW!

Robbie
Nov 03, 2001, 06:46 AM
Always looking UP
FANMAN's Avatar

Re: Wanted: plans for Antique pusher project


Quote:
Originally posted by JREEVES
I'm looking for suggestions or plans to scratch build an antique slowflyer for twin pusher N20 geared motors I have gathering dust. Something with an undercambered wing and builtup stick fuselage is what I'm thinking. Know of anything out there that fits the bill? Thanks all, Jim.
I dont know about many antique pusher planes, I do have a RUBBER POWERED, stick construction BD-5 I've got tons of small sized plans that could easily use the N20 motors....

FANMAN

P.S. I'll check on the ole pushers, I think the Brits had a few
Last edited by FANMAN; Nov 03, 2001 at 12:50 PM.
Nov 03, 2001, 07:39 AM
Wayward Pilot
JREEVES's Avatar
FANMAN, let me know what you've got thanks! jimreeves@jtel.net
Nov 04, 2001, 01:25 AM
Electric Coolhunter
Thomas B's Avatar
Hmm...It is not exactly what you asked for, but the name of your thread made me think of the old A-frame canard pusher rubber models.

RCM has a plan for an R/C version for two Cox motors that has been converted for Speed 400 before.

How about an indoor, very slow fly A-Frame pusher? Sized for direct drive Wattage B-2 motors or the gear drive N-20s?
Latest blog entry: 2014 events and travel