Thread Tools
Mar 03, 2012, 09:31 AM
Registered User
Discussion

Aileron Does Not Work with Guardian


Bill or anybody that can offer help,

I am in the final stages of setting up my Eagle Tree system and I am having a problem with the ailerons working when the Guardian is turn on. I have a skywalker and video, audio, and all functions work fine. When Guardian is turned off, "Configure Radio Controls/Stabilization/Elevon Mixing On?" parameter selected "off". All control functions work fine. However, when I select "on", the ailerons will not function. All the other control surfaces work, but not ailerons. When I select "off", all is OK. I have tried manipulating the Overall Guardian gain with no response.

Any help is appreciated.

Hector
Sign up now
to remove ads between posts
Mar 03, 2012, 12:32 PM
Registered User
Quote:
Originally Posted by texasdrifters
Bill or anybody that can offer help,

I am in the final stages of setting up my Eagle Tree system and I am having a problem with the ailerons working when the Guardian is turn on. I have a skywalker and video, audio, and all functions work fine. When Guardian is turned off, "Configure Radio Controls/Stabilization/Elevon Mixing On?" parameter selected "off". All control functions work fine. However, when I select "on", the ailerons will not function. All the other control surfaces work, but not ailerons. When I select "off", all is OK. I have tried manipulating the Overall Guardian gain with no response.

Any help is appreciated.

Hector
I believe I solved the problem with equipment replacement. I installed a spare OSD module, uploaded the software, ran servo wizard. All works as expected.

I ran servo wizard several time with the original OSD, but the aileron would not function with Guardian turned on.

I will contact Eagle Tree for repair.

Hector
Jul 14, 2012, 09:55 PM
Registered User

Please help


Quote:
Originally Posted by texasdrifters
I believe I solved the problem with equipment replacement. I installed a spare OSD module, uploaded the software, ran servo wizard. All works as expected.

I ran servo wizard several time with the original OSD, but the aileron would not function with Guardian turned on.

I will contact Eagle Tree for repair.

Hector
Hi Hector,
I am new to FPV and have installed Eagle Tree with Guardian. Mine, I think, is the same with your system. At first, only elevator don't work but later on, aileron also don't work. How did you solved this promblem? Pls share as FPV is new hobby in Vietnam and nobody has ever experienced.
Thanks for your soonest support.
Nhut
Jul 18, 2012, 12:55 PM
billpa's Avatar
NhutSgn, could you please click "Factory reset" on the OSD Pro setup page in the PC software, and then reconfigure your OSD, and run the servo analysis wizard again?

if that doesn't work, could you please save your OSD configuration (.TXT file) from the OSD Pro setup page, and attach the .TXT file here? Thanks.
Jul 20, 2012, 03:53 AM
Registered User
Quote:
Originally Posted by billpa
NhutSgn, could you please click "Factory reset" on the OSD Pro setup page in the PC software, and then reconfigure your OSD, and run the servo analysis wizard again?

if that doesn't work, could you please save your OSD configuration (.TXT file) from the OSD Pro setup page, and attach the .TXT file here? Thanks.
Hi Billpa,

My trouble is because the sticks had been centered before the counter reached "0" when I run the servo analysis wizard. The problem was fixed after I have the sticks centered timely.

Thanks for your reply.
Nhut


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Lawmate receiver 1280 on channel A? B does not work surf1punk FPV Talk 17 May 04, 2016 08:24 PM
Discussion HPP-22 update does not work Kimi Hitec/Multiplex USA 5 Nov 14, 2011 09:09 AM
Help! HEX config using Pro and GPS does not work cicadafx Aerial Photography 2 Oct 23, 2011 09:18 PM
Question FlyDream failsafe does not work John Kim Power Systems 1 Oct 04, 2011 07:30 PM
Question FlyDream failsafe does not work John Kim Radios 4 Oct 04, 2011 06:40 PM