Thread Tools
Old Mar 08, 2012, 10:25 PM
piccoloflyer is offline
Find More Posts by piccoloflyer
Registered User
Quote:
Originally Posted by v22chap View Post

Also want to know why the diheadral in the mounts .????
it will make the arm stronger vs straight arm
Sign up now
to remove ads between posts
Old Mar 08, 2012, 11:10 PM
llbr22 is offline
Find More Posts by llbr22
Registered User
llbr22's Avatar
Quote:
Originally Posted by piccoloflyer View Post
it will make the arm stronger vs straight arm
I thought it was to keep the arms out of camera view, and still keep the CG low .
Old Mar 08, 2012, 11:40 PM
saabguyspg is offline
Find More Posts by saabguyspg
saabguyspg's Avatar
I can't see this being stronger.. I beilve they have gone this way to increase stability.

anyway still zero specs on this frame, weight, manual pictures nothing... The period for pre order should really start after they give us some real infomation and rea flying video.

What we are seeing is not enough for me to even consider opening my wallet...

also how much are the props to replace? will they be available soon? last thing I want it an oops and now I have a 1100$ machine sitting doing nothing while I wait for them to release props for individual sale.
Site Sponsor
Old Mar 09, 2012, 12:48 AM
piccoloflyer is offline
Find More Posts by piccoloflyer
Registered User
you have 30 days to find out more about this S800, pre-order discount finish on April 10, an Cinestar 6 will cost you more than $1000 without FC that comes with APC props, I dont know much about this high end machine, all I want is good strong prop, so they dont break inflight, I had this DJI F550 with WKM all nicely dial in , then one prop breaks, it flip twice from 10 m hitting the ground half way on the third flip.
Old Mar 09, 2012, 01:17 AM
leoli0205 is offline
Find More Posts by leoli0205
JUN
no...but i preorder it ...
Old Mar 09, 2012, 08:01 AM
piccoloflyer is offline
Find More Posts by piccoloflyer
Registered User
S800 spec is out
weight: 1.8kg
ESC: 40A
Motor: 4114 320kv
prop: 15" carbon fiber
Motor to Motor: 800mm
Old Mar 09, 2012, 08:14 AM
TruckBasher is offline
Find More Posts by TruckBasher
Registered User
TruckBasher's Avatar
Got this from local distributors
Old Mar 11, 2012, 04:30 AM
BrundleFly is offline
Find More Posts by BrundleFly
Registered User
BrundleFly's Avatar
Quote:
Originally Posted by piccoloflyer View Post
S800 spec is out
weight: 1.8kg
ESC: 40A
Motor: 4114 320kv
prop: 15" carbon fiber
Motor to Motor: 800mm
So what do you imagine the end result of these numbers is, little flyer? I'm not brilliant with these calculations. Seems like we need bigger motors and or ESCs to run those props? Then again, it's debatable...
Old Mar 11, 2012, 06:24 AM
piccoloflyer is offline
Find More Posts by piccoloflyer
Registered User
Quote:
Originally Posted by BrundleFly View Post
So what do you imagine the end result of these numbers is, little flyer? I'm not brilliant with these calculations. Seems like we need bigger motors and or ESCs to run those props? Then again, it's debatable...
Let me do the calculation for you, max takeoff weight is 6kg, we have 6 motors, 1kg for each motor, that not even half of these motor will produce at their max, and there will drew less than 10A at hover , maybe 20A at fast climb out, that's 120A total for the battery. 40A ESC is overkill, if all Motor drew even 30A each, it will be 180A total, the battery will melt down first.
Old Mar 11, 2012, 06:37 AM
lovegroove is offline
Find More Posts by lovegroove
http://drone-pilot.blogspot.fr
lovegroove's Avatar
Quote:
Originally Posted by piccoloflyer View Post
Let me do the calculation for you, max takeoff weight is 6kg, we have 6 motors, 1kg for each motor, that not even half of these motor will produce at their max, and there will drew less than 10A at hover , maybe 20A at fast climb out, that's 120A total for the battery. 40A ESC is overkill, if all Motor drew even 30A each, it will be 180A total, the battery will melt down first.
40A isn't overkill. Think about a basic quad flying in + configuration doing fast forward flight and then wanting to stop it and come into a hover. The front motor is going to have to work really hard for a short burst to overcome the inertia of the forward flight and stop it. That could easily mean a motor pulling max amps for a short time, hence why it sometimes seems overkill to use big ESCs, but in actual fact it is necessary.
Old Mar 11, 2012, 06:42 AM
timecop is offline
Find More Posts by timecop
Suspended Account
Yes, but you can burst a 20A esc to 40A for the duration of this "short burst" without (too many) issues. Anyhow, heavy frame is heavy, so I'll pass on this one. And plastic vibrates/resonates, regardless of what fanboys say. I'll keep making my frames out of wood/alu. Cheaper, too.
Old Mar 11, 2012, 07:08 AM
piccoloflyer is offline
Find More Posts by piccoloflyer
Registered User
Quote:
Originally Posted by lovegroove View Post
40A isn't overkill. Think about a basic quad flying in + configuration doing fast forward flight and then wanting to stop it and come into a hover. The front motor is going to have to work really hard for a short burst to overcome the inertia of the forward flight and stop it. That could easily mean a motor pulling max amps for a short time, hence why it sometimes seems overkill to use big ESCs, but in actual fact it is necessary.
Good point there, I guess 40C is more of safety margin, but I am more worry about prop now, 15" can produce more thrust, but the strength will be reduce than shorter prop, can we ask DJI to undertake an strength test with it's carbon fiber prop, like hanging some weight under the prop to see if it will break, I would like to see it can handle 10 kg
Old Mar 11, 2012, 09:42 AM
~>Miha<~ is offline
Find More Posts by ~>Miha<~
Registered User
~>Miha<~'s Avatar
Quote:
Originally Posted by piccoloflyer View Post
you have 30 days to find out more about this S800, pre-order discount finish on April 10, an Cinestar 6 will cost you more than $1000 without FC that comes with APC props, I dont know much about this high end machine, all I want is good strong prop, so they dont break inflight, I had this DJI F550 with WKM all nicely dial in , then one prop breaks, it flip twice from 10 m hitting the ground half way on the third flip.
Don't worry, your much more expensive S800 (together with the $3000 gimbal and $XXXX camera) will fall from the sky like a stone too and be waste. If the props won't break anymore, the ESC or motor will fail with the same effect --> 1:0 for gravity

Not sure why anyone wants to put that much money on a config (flat hex) that offers zero redundancy and no chance of AR landing.
Old Mar 11, 2012, 10:11 AM
redridinghood is offline
Find More Posts by redridinghood
Registered User
DJI probably went for a hex because the wkm hardware cannot support 8 motors correctly. The two outputs they reconfigured for motors 7 and 8 are asynchronous and have so much jitter that make fast esc's like Herkules II and Castle creations new firmware throw a fit. Wkm offers no reduntancy on flat octocopters.
Old Mar 11, 2012, 10:14 AM
timecop is offline
Find More Posts by timecop
Suspended Account
Quote:
Originally Posted by redridinghood View Post
DJI probably went for a hex because the wkm hardware cannot support 8 motors correctly. The two outputs they reconfigured for motors 7 and 8 are asynchronous and have so much jitter that make fast esc's like Herkules II and Castle creations new firmware throw a fit. Wkm offers no reduntancy on flat octocopters.
You have a source for that? I don't remember if I tried making my WK-M a octo config when I was looking at the motor outputs on the scope, do you have a screenshot comparing PWM output on say motor #6 and motor #7 (or a link to thread about this)


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Report on CC's Phoenix 25 ESC's multi-rotor firmware & the WK-M Quad-Copter tkeeg Castle Creations 388 Dec 09, 2015 05:39 AM
New Product DJI-WKM Multi Rotor Test and Eval musicwarrior Multirotor Talk 27 Oct 14, 2013 10:39 PM
Wanted WKM DJI - DJI Wookong Multi-Rotor System controller stabilizing rui eduardo Aircraft - Electric - Multirotor (FS/W) 2 Mar 14, 2012 09:26 AM
Wanted WKM DJI - DJI Wookong Multi-Rotor System controller stabilizing rui eduardo Aircraft - Electric - Multirotor (FS/W) 0 Feb 28, 2012 06:05 PM