DJI Zenmuse 3-axis gimbal - Page 16 - RC Groups
Thread Tools
Jul 18, 2012, 05:30 PM
Registered User
EndOfDays's Avatar
Here is a video from today with fixed aperture f8.0, shutter times between 1/100 (down to the ground) and 1/300-1/500 else.
@quadslo, regarding your last post I should have taken 4 or 5.6?

All scenes except the middle (you will notice) are 4x accelerated.

Z15 videoblog 2012-07-18: testing sony with fixed aperture f8.0 (2 min 17 sec)


best regards

Ferdinand
Sign up now
to remove ads between posts
Jul 19, 2012, 06:08 AM
Registered User
ferdinand, can you tell which motor/prop combo are you using? i see "e-props"..
thx
Jul 19, 2012, 06:19 AM
Registered User
EndOfDays's Avatar
Motors
http://www.hobbyking.com/hobbyking/s...ter_Motor.html

Props: Graupner 14x8 E-Prop

I run on 4S8000 (Zippy) gives about 10-12min flighttime,
AUW with Video Downlink but without langing legs: 4300gr

Please let me state, that this is not a recommended copter for the Z15, DJI recommends the S800

best regards

Ferdinand
Jul 19, 2012, 06:21 AM
Registered User
Try the 5.6 or 4 if there is less vigentting on the edges.
Nice to see that there is no gello effect on the shutter speed above 1/200
Jul 19, 2012, 09:57 AM
Registered User
Quote:
Originally Posted by EndOfDays
thank you very much
Jul 19, 2012, 03:54 PM
Registered User
Just got my Z15 mounted today on my SJ6 landing gear...

I love it.... lol
Jul 19, 2012, 04:50 PM
Registered User
EndOfDays's Avatar
@rsun77

Yeah, on this copter the Z15 already looks small

I see you have the maxamps batteries. I also have them, but they do like long (very long) flight-times. So if you have the chance, you could have a look at the Zippy 4S8000, they have 770gr a pack and the like the discharge rate - I assume you will have - more than the maxamps, and you can really use 7500 of them.

Keen to see that beast in flight

best regards

Ferdinand
Jul 20, 2012, 12:56 AM
Registered User
Lol, they were only for display.

I am going for some 4s 8000 or so on it.
It will also be too heavy for my setup.

Thinking on trying out the DJI engines on the SJ6 and see what I kan get out of it.
Jul 20, 2012, 09:54 PM
by Alary Design
Photoship One's Avatar

Zenmuse Z15N on X7


Got our shipment of Zenmuse gimbals in yesterday. Haven't fixed our S800 yet so first order of business was to put a Zenmuse on our X7 demo copter. Should be interesting to see how it performs.





Jul 21, 2012, 12:26 AM
Registered User
hexa's Avatar
Quote:
Originally Posted by Photoship One
Got our shipment of Zenmuse gimbals in yesterday. Haven't fixed our S800 yet so first order of business was to put a Zenmuse on our X7 demo copter. Should be interesting to see how it performs.





Wow those landing gear on that heli looks very nice.
Jul 21, 2012, 01:34 AM
Registered User
DJ, not ready for copter yet. Unless your Ace One has the new firmware?
We flew heli using Ace One with new firmware and FS100.
Jul 21, 2012, 01:37 AM
by Alary Design
Photoship One's Avatar
We're planning to use a Wookong-M separate for the Zenmuse only.
Jul 21, 2012, 01:43 AM
Registered User
Saw your x7 front mount earlier this year; looking good. I will let you know when Ace One is ready for it.... I have two Ace Ones coming in from China ..... to my house. So, I have a personal interest in getting it done.

What s-tab you use for the X7?
Jul 21, 2012, 11:47 AM
Registered User
This boy has been taken

Zenmuse Z15 Helicam Greece Test 1 (2 min 18 sec)


another video

http://vimeo.com/45693042
Jul 21, 2012, 01:38 PM
the best laid plans.......
thequieteuropean's Avatar
lil of topic but since endofdays is rolling out one clip after the other.

photozone.de. has great lens reviews and describes the vignetting characteristics of the sony 16/2.8 pancake in detail.

their lens reviews are in english ( despite the .de domain )

and ACCURATE

havenīt seen such precise unbiased lens reviews elsewhere.
stop by before you buy, their reviews match what i experienced on each and every lens i have .

btw . i do own a nex5n/16 myself , no bashing intended....

cheers

rio


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion DJI F550 Hex Build, with 2-axis NEX-5N/GH2 Gimbal... GGoodrum Multirotor Drone Talk 9560 May 28, 2014 12:06 AM
New Product CLD 2/3-Axis FPV Gimbal for mini cameras and GoPro crd FPV Talk 9 Jul 13, 2012 11:42 PM
Discussion DJI Spread Wings S800 and Zenmuse Z15 prices are out! tpnitro Multirotor Drone Talk 120 Jun 19, 2012 02:27 AM
Wanted 3 axis gimbal on a budget =) HobokenHobbiesNJ FPV Equipment (FS/W) 3 Mar 20, 2012 11:57 AM
New Product CLD 2/3-Axis FPV Gimbal for mini cameras and GoPro crd Aerial Photography 2 Sep 12, 2011 07:44 PM