Nov 19, 2012, 05:03 PM
Registered User
I hope someone makes custom retracts soon, like they did for the battery tray. The price is insane.
Sign up now
to remove ads between posts
Nov 19, 2012, 05:21 PM
Registered User
So i installed the new firmware. S-Bus and PPM works perfectly. However i cannot trigger the video recording on the Gimbal. Can somebody with a Zen for Nex-5n or Nex7 please try it out. Camera shutter works normally.
I can see the AUX3 channel trigger in the Assistent but it doesn't trigger video recording on the camera...
Nov 19, 2012, 05:55 PM
Registered User
Quote:
Originally Posted by miza View Post
I hope someone makes custom retracts soon, like they did for the battery tray. The price is insane.
They have, video here, don't know the price, but It can't be more expensive

DJI S800 Retract Gear System

DJI S800 Retract Gear System (1 min 43 sec)
Nov 19, 2012, 06:15 PM
Registered User
Quote:
Originally Posted by Iceman575 View Post
So i installed the new firmware. S-Bus and PPM works perfectly. However i cannot trigger the video recording on the Gimbal. Can somebody with a Zen for Nex-5n or Nex7 please try it out. Camera shutter works normally.
I can see the AUX3 channel trigger in the Assistent but it doesn't trigger video recording on the camera...
Unfortunately that's a design limitation in the current trigger/firmware.
Nov 19, 2012, 07:36 PM
Registered User
hexa's Avatar
Quote:
What’s changed?
 Fix the problem that the gimbal is bouncing when toggle the working mode switch.
 Fix the problem that the roll axis drifts quickly after the calibration of the gimbal.

What’s new?
 S-Bus & PPM Receiver supported (S-Bus -> AUX2,PPM ->AUX3).
 If DJI iOSD is used, the gimbal attitude information (   /     ) is available for display on screen.
 Video recording is available for Z15-N gimbal (AUX3).
ppm s-bus may come in handy
Nov 20, 2012, 01:55 AM
Registered User
topgearuk's Avatar
If anyone is looking at upgrading to the new retractable legs, I'd be interested in buying your complete fixed set! Or if anyone is not using there's.. Please PM me.
Nov 20, 2012, 03:19 AM
Registered User
Quote:
Originally Posted by RedSky View Post
Unfortunately that's a design limitation in the current trigger/firmware.
So do i need to get a new HDMI converter just so i can trigger video recording ? I have not seen any new hardware like that at any shop...
Nov 20, 2012, 04:34 AM
Registered User
banga's Avatar
Finding CG on S800+Zenmuse+GH2+6S 10000mAH Gens Ace LiPo. I suppose that zenmuse need to be power up(or?) if not it will hang and distrub CG( I will get inaccurate postion of CG)?
Where is the best way to tie a rope?

BTW can u share ur "XYZ" setting f you have similar equipment.
I am using middle stick for mounting GPS.

Cheers
Nov 20, 2012, 04:56 AM
Registered User
I guys, just for show you my new hexa copter carbon frame with zenmuse.
I was owner of S800 and it is flying so better. No vibration.
With one 5000mha it can fly for 7 min. with 2 lipos for 13 min.

DroneFly D6 (5 min 4 sec)
Nov 20, 2012, 05:26 AM
Registered User
EndOfDays's Avatar
@filmer nice!
Nov 20, 2012, 05:30 AM

DJI released latest firmware


Hi guys

DJI released latest firmware for Zenmuse Z15.
http://www.dji-innovations.com/produ...z15/downloads/

Functions:

 Three axes stability
HDMI - AV module
Shutter control
Maximumcontrolled rotation speed:
Pan 130°/s
Tilt 130°/s
Roll 30°/s
Supported camera and lens types:
1. Nex-5N with Sony 16mm
2. Nex-7 with Sony 16mm
3. GH2 with Lumix G14 mm/F2.5
4. GH2 withLumix G20 mm/F1.7


What’s changed?
Fix theproblem that the gimbal is bouncing when togglethe working mode switch.
Fix theproblem that the roll axis drifts quickly after the calibration of the gimbal.


What’s new?
S-Bus&PPM Receiver supported (S-Bus -> AUX2,PPM ->AUX3).
If DJIiOSD is used, the gimbal attitude information (PAN/TILT/ ROLL) is available for display on screen.
Video recording is availablefor Z15-N gimbal (AUX3).


Important
The function of Z15-Nvideo recordingrequires to be used in conjunction with the new HDMI - AV hardware (V2).
Nov 20, 2012, 05:45 AM
Registered User
hexa's Avatar
Quote:
Originally Posted by DJI INNOVATIONS View Post
Hi guys

DJI released latest firmware for Zenmuse Z15.
http://www.dji-innovations.com/produ...z15/downloads/

Functions:

 Three axes stability
HDMI - AV module
Shutter control
Maximumcontrolled rotation speed:
Pan 130°/s
Tilt 130°/s
Roll 30°/s
Supported camera and lens types:
1. Nex-5N with Sony 16mm
2. Nex-7 with Sony 16mm
3. GH2 with Lumix G14 mm/F2.5
4. GH2 withLumix G20 mm/F1.7


What’s changed?
Fix theproblem that the gimbal is bouncing when togglethe working mode switch.
Fix theproblem that the roll axis drifts quickly after the calibration of the gimbal.


What’s new?
S-Bus&PPM Receiver supported (S-Bus -> AUX2,PPM ->AUX3).
If DJIiOSD is used, the gimbal attitude information (PAN/TILT/ ROLL) is available for display on screen.
Video recording is availablefor Z15-N gimbal (AUX3).


Important
The function of Z15-Nvideo recordingrequires to be used in conjunction with the new HDMI - AV hardware (V2).
Is the new V2 hdmi-av hardware free to all existing z15 owner if not. What is the price ?
Nov 20, 2012, 01:32 PM
Registered User
rruiz's Avatar
Quote:
Originally Posted by DJI INNOVATIONS View Post
Hi guys

DJI released latest firmware for Zenmuse Z15.
http://www.dji-innovations.com/produ...z15/downloads/

Functions:

 Three axes stability
HDMI - AV module
Shutter control
Maximumcontrolled rotation speed:
Pan 130°/s
Tilt 130°/s
Roll 30°/s
Supported camera and lens types:
1. Nex-5N with Sony 16mm
2. Nex-7 with Sony 16mm
3. GH2 with Lumix G14 mm/F2.5
4. GH2 withLumix G20 mm/F1.7


What’s changed?
Fix theproblem that the gimbal is bouncing when togglethe working mode switch.
Fix theproblem that the roll axis drifts quickly after the calibration of the gimbal.


What’s new?
S-Bus&PPM Receiver supported (S-Bus -> AUX2,PPM ->AUX3).
If DJIiOSD is used, the gimbal attitude information (PAN/TILT/ ROLL) is available for display on screen.
Video recording is availablefor Z15-N gimbal (AUX3).


Important
The function of Z15-Nvideo recordingrequires to be used in conjunction with the new HDMI - AV hardware (V2).

My Z15 didn´t come with the USB cable... can I use the regular WKM cable? I know the answer but just to confirm.

Do you have pictures of the HDMI-AV Hardware ?

Regards
Nov 20, 2012, 03:02 PM
Registered User
You can use the wkm cable.

The naza, wkm, z15 and OSD all use it. :-)
Nov 20, 2012, 03:36 PM
Registered User
hexa's Avatar
Yep it's a standard USB cable. Black berry mobile phone and Sony 3d glasses use the same cable for charging.
They all perform the same way. Tested


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion DJI F550 Hex Build, with 2-axis NEX-5N/GH2 Gimbal... GGoodrum Multirotor Drone Talk 9560 May 27, 2014 11:06 PM
New Product CLD 2/3-Axis FPV Gimbal for mini cameras and GoPro crd FPV Talk 9 Jul 13, 2012 10:42 PM
Discussion DJI Spread Wings S800 and Zenmuse Z15 prices are out! tpnitro Multirotor Drone Talk 120 Jun 19, 2012 01:27 AM
Wanted 3 axis gimbal on a budget =) Vyas FPV Equipment (FS/W) 3 Mar 20, 2012 10:57 AM
New Product CLD 2/3-Axis FPV Gimbal for mini cameras and GoPro crd Aerial Photography 2 Sep 12, 2011 06:44 PM