First Blog - First "Mod" - RC Groups
Thread Tools
This thread is privately moderated by xfatdannx, who may elect to delete unwanted replies.
Mar 02, 2012, 06:04 AM
advanced n00b
xfatdannx's Avatar

First Blog - First "Mod"

Short time reader, first time blogger. I did the rudder mod to my pkz P-51D Mustang "Gunfighter"

1.) Parts! Push rod and servo. (testing the servo before installation)

2.) Installing the servo. (Glued with hot glue as per suggestion on this forum)

3.) Horn and Push rod installed and ready to go.

4.) Everything attached and ready to go. Cut out the little pieces of foam that hold the rudder in place. I also moved the rudder as far as it would go to one side and put packing tape along the open side of the hinge (repeat on opposite side). Read that these planes sometimes have failure in rudder so i wanted to make sure i beefed it up a little. Will be adding plastic hinges in the near future.
Last edited by xfatdannx; Mar 22, 2012 at 07:52 AM.
Sign up now
to remove ads between posts

Thread Tools