Shop our Airplanes Products Drone Products Sales
Thread Tools
Mar 02, 2012, 01:07 AM
Registered User
Discussion

My Turnigy 9X don't want power on!!! (sometimes) HELP


What can be that my 9x modificated don't want power on?
Once every 5/6 hours it starts normally and is perfect until I power it off.
Then I'll try to power on it again but dont start!!
Exactly I can see that the module transmission is functioning, and on the pcb there are 5V correctly, but the sreen remains off, no beeps or other.... Dead.
I wait some hours, and..... sometimes, at firs affort, it starts exactly perfectly....
And then never again for hours...
What can be??????
Thankyou
Sign up now
to remove ads between posts
Mar 02, 2012, 06:03 AM
Balsa addiction since age 3
ScottSails's Avatar
Quote:
Originally Posted by westy1957
What can be that my 9x modificated don't want power on?
Once every 5/6 hours it starts normally and is perfect until I power it off.
Then I'll try to power on it again but dont start!!
Exactly I can see that the module transmission is functioning, and on the pcb there are 5V correctly, but the sreen remains off, no beeps or other.... Dead.
I wait some hours, and..... sometimes, at firs affort, it starts exactly perfectly....
And then never again for hours...
What can be??????
Thankyou
Sure sounds like a bad connection (either solder joint or connector). You have stock battery holder or Lipo installed?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Anybody have a Vac U Tow 2 they don't want? dgfinch Dock Talk 0 Feb 23, 2012 08:51 AM
Discussion wiring fail: destroyed my gopro ... don't want to destroy my goggles gitcho FPV Talk 4 Nov 30, 2011 03:33 AM
Discussion New Turnigy 9X ch 5 and six don't work tigermoth Radios 5 Oct 22, 2011 08:27 PM
Static or No Static on my LOGO-10 Don't want to Blow my Controller Again.. Lv2Fly Electric Heli Talk 1 Nov 01, 2002 06:22 PM