500 & 600 Fuselages - RC Groups
Thread Tools
Mar 01, 2012, 11:09 PM
Registered User
flyingfish56's Avatar

500 & 600 Fuselages

When istalling a fuselage on large scale heli's, such as an Align 500, 550e or 600, does the entire tail boom have to be removed to get the fuselage on ? Or do they make it so that the whole fuselage slides over the assembled airframe? how much disassembly of the heli is required to get a large scale fuselage onto a large scale heli..?:

Im thinking of installing a Funkey Jet Ranger Fuselage on a Align 550e Heli, if its not to involved.
Sign up now
to remove ads between posts
Mar 02, 2012, 02:24 AM
3D and Scale RC Heli Pilot
BlackTitanium's Avatar
Remove the skids, canopy, canopy mounts, tail boom brace, horizontal and vertical fins.

Then for most fuselages, remove the tail rotor assembly, slide Heli into the fuselage, and reinstall the tail rotor assembly.

Those are the basic steps, for something like the Hughes 500, AS-350 and Jet Ranger.

FYI: See www.scaleflying.com for more fuselage choices.
Last edited by BlackTitanium; Mar 02, 2012 at 02:31 AM.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted Trex 500/550/600 3Gx Setup and Ready to Fly goteron1 Aircraft - Electric - Helis (FS/W) 1 Mar 06, 2012 12:08 PM
Wanted 500-600 size heli F27QFlyer Aircraft - Electric - Helis (FS/W) 8 Feb 29, 2012 09:55 PM
Sold ALIGN 6S1P 22.2V 3300mAh/40C/A HBP33001 [suitable for TREX 500 ~TREX 600 helifreak592 Aircraft - Electric - Helis (FS/W) 0 Feb 23, 2012 10:04 AM
Discussion More 450, 500 and 600 size fuselages from a USA vendor Hoverup Scale Helicopters 14 Feb 17, 2009 11:31 PM
Help! 500-600 size fuselages darthdrk Large Electric Helis 12 Oct 23, 2008 04:16 AM