Thread Tools
Nov 15, 2012, 06:57 AM
Registered User
Quote:
Originally Posted by BadBert
Could i fit in a 2s 460 mah nanotech lipo in it? could i get the cg right?
I did use 300mAh 2S ... and I'm quite sure that you can fit also the 460mAh .. just push it as back as possible ...

Anyhow ... more heavy you get your bird ... and less pleasure will be to fly it ..

Sign up now
to remove ads between posts
Nov 16, 2012, 02:01 AM
Registered User
BadBert's Avatar
For outside flight it should be fine then?

And how slow can this puppy go? (with the 180 mah)
Nov 16, 2012, 02:10 AM
Registered User
Quote:
Originally Posted by BadBert
For outside flight it should be fine then?

And how slow can this puppy go? (with the 180 mah)
Outside it fly perfectly ... it is inside that can be challenging ... it is not very slow ... ... (or maybe it is just me that I can't fly slow )
Dec 03, 2012, 10:08 AM
Registered User
Would the micro stryker brick be a good candidate for a transplant as i have a couple lying around.
Dec 07, 2012, 01:03 PM
Sky good, Earth bad!
Dakrat's Avatar
HobbyKing has the parts back in stock, just ordered with a 10g motor...

Some new buddycodes:

Radjet 420 - Replacement Fuselage w/ Motor Mount: http://www.hobbyking.com/buddy.asp?c...5-A62C9ABCD579

Radjet 420 - Replacement Main Wing: http://www.hobbyking.com/buddy.asp?c...2-1BED5A0F2346

Radjet 420 - Replacement Vertical Stabilizer: http://www.hobbyking.com/buddy.asp?c...0-80865F8DCDFF

Radjet 420 - Replacement Canopy: http://www.hobbyking.com/buddy.asp?c...C-82857C37D23B

I am going to fly it with 3S 180mah Lipos
Dak
Last edited by Dakrat; Dec 07, 2012 at 02:15 PM.
Dec 12, 2012, 05:06 PM
Registered User
Quote:
Originally Posted by planekrazy
stalyoni, absolute travel measurements for elevons were provided because D/R settings from one TX do not necessarily map to every other tx brand/model.

In case you are still looking for tx settings, I use an old JR XP9303 TX and my D/R settings for the RadJet 420 are elevator low rate 35% and high rate 50%; aileron low rate 45% and high rate 75%.


btw, I wanted to share with everyone that the Turnigy B1230-4100 motor started stuttering after about 20 flights of running on the 3S setup. No surprise given that I was really pushing the motor well beyond its rated limits. This is the same stuttering that the AP05 in my Critical Mass started doing after running on 3S setup for 8 flights. The good news is that all 3 of my Plush 6A ESCs still work great, and never had a problem with 3S setups so far. I ordered one of those new BL1230-4200kv motors from HK to see if it will survive 3S using a less aggressive prop such as the GWS 2510.
I have this motor NTM Prop Drive 13-12 2600KV / 42W
And put the esc on high eff.
Then you get more power on 3S because the 2600kv is lower then the 3000kv from AP05.
My radjet flies still very good after 30 flights without smoke the motor.

Maybe helps this late post!
Dec 13, 2012, 11:27 AM
Registered User
Quote:
Originally Posted by ballores
Would the micro stryker brick be a good candidate for a transplant as i have a couple lying around.
i transplanted a micro stryker brick into it had to solder the servo wires and slice the fuze to remove the esc,all worked well with no servo heating issues.
Dec 19, 2012, 10:42 PM
Registered User
gchrisgo34's Avatar
hello all, im thinking of getting this little plane for christmas. can anyone tell me the motor size? and shaft size? im wanting to try out one of the new micro turnigy motors HK has. thanks
Dec 19, 2012, 11:06 PM
Registered User
gchrisgo34's Avatar
and what size batteries are people using? i know it suggests 2s 180, but i always try to get the biggest battery i can get away with. thanks
Dec 20, 2012, 06:41 AM
Registered User
Ben D Wing's Avatar
Quote:
Originally Posted by gchrisgo34
and what size batteries are people using? i know it suggests 2s 180, but i always try to get the biggest battery i can get away with. thanks
Keep to the 2s 180mAh as this little model flies best when kept light. I've even removed the decals off the lower surfaces to save a few Grammes in weight. The endurance is long enough with the recommended battery without having the penalty of extra weight.
Jan 02, 2013, 07:08 PM
Registered User
Quote:
Originally Posted by gchrisgo34
and what size batteries are people using? i know it suggests 2s 180, but i always try to get the biggest battery i can get away with. thanks
I fly with 3S 180mA.
More power more fun
Weigt is equal stock.
May 01, 2013, 12:46 PM
Registered User
gchrisgo34's Avatar
OH BOY!!!!!! I finally ordered a 420! been drooling over it ever since it came out. I went ahead and ordered an extra body "kit" to go with it. I ordered the recommended 2cell 180's, and one 3cell 180 to fly with. have any of you noticed those new turnigy micro motors they've recently came out with? they look very nice, and their specs say they can handle 3-4 cell batteries? I don't plan to run the 420 on 4cell, but those motors look really nice.
May 01, 2013, 01:04 PM
Embargo lifted.
kenstogie's Avatar
I have a RJ 420 the is still in the box!!! The elevons never worked right, I have a couple of new servos to throw in but have to get around to doing it.
May 01, 2013, 04:19 PM
Registered User
gchrisgo34's Avatar
my multiplex funjet is without a doubt my favorite airplane!! ive had 2 original funjets, 1 funjet ultra, and 4 flyjet x-830's. funjet ultra was heavy & didn't fly as well as the original funjet, so I sold it. but it is my favorite, and im looking forward to this one. ill be able to carry it pretty much everywhere. and fly it just about anywhere.
May 02, 2013, 06:31 AM
Embargo lifted.
kenstogie's Avatar
Funjets look cool but isnt this a radjet forum?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion RadJet from the KING! vettster Foamy EDFs 1 Jun 01, 2014 06:00 PM
Discussion HK Skyfun or Radjet?? nogas Pusher Prop Jet Models 5 Feb 17, 2014 01:51 AM
Wanted Wtb wtb hk radjet lectroglide Aircraft - Electric - Jets (FS/W) 0 Feb 27, 2012 09:49 PM
Help! Turnigy 420 Charger Problem LukeSkywalker Batteries and Chargers 6 Feb 26, 2012 09:35 PM
New Product New Funjet clone- HobbyKing Radjet Kmart FPV Talk 7 Oct 20, 2011 10:33 AM