Shop our Airplanes Products Drone Products Sales
Thread Tools
Sep 29, 2012, 09:18 AM
Registered User
XSSSIVE's Avatar
Quote:
Originally Posted by boopidoo View Post
I guess it's a double edged question. HK is known to do this and has done so before. Although the manufacturer says that this is not good they will because of HK lower prices gain a much larger customer base. I for instance would not buy it for $350 but I have just bought it for $204.
I'll second that. I ordered one from HK for $240 shipped. I don't think that it's worth paying more than that. I guess we'll see how good it is when it arrives.
Sign up now
to remove ads between posts
Sep 30, 2012, 12:32 AM
Registered User
anybody has solved the problem of vibration at the motor when increasing the throttle . the motor frame is very weak at one of its axis . especially when the prop is not perfectly balance.
Sep 30, 2012, 12:46 AM
Custom quad builder
tech69x's Avatar
Quote:
Originally Posted by ozchris View Post
now i have been told [nothing special .. they are Hobbywing Fentium V4 Version 10A ESCs ... for props, can use Gemfan with plastic adaptors as the original props have metal inserts ] dont know if these is wright as far as i can tell not 12c
You can not the props that come with the ifly have threaded inserts that screw on to the motor shafts you can use different props but you have to use a 3mm nut to hold them on
Sep 30, 2012, 04:47 AM
Wannabe B-26 pilot!
Matt Halton's Avatar
I've just ordered one of these from HK,and have a few questions.

Will it comfortably lift a Gopro HD with FPV gear? Do I need to install smaller props, and what is the risk of burning out ESC's with a higher loading?

Thanks

Matt
Sep 30, 2012, 06:18 AM
Custom quad builder
tech69x's Avatar
Quote:
Originally Posted by Matt Halton View Post
I've just ordered one of these from HK,and have a few questions.

Will it comfortably lift a Gopro HD with FPV gear? Do I need to install smaller props, and what is the risk of burning out ESC's with a higher loading?

Thanks

Matt
I will lift a gopro easy with the props that come with it
Oct 02, 2012, 05:03 PM
Yes, it will go verticle
I just ordered one of these Quads It will be my first Quad hopefully it's pretty durable. Any tips or recommeded setttings for a beginner. Thanks Bob
Oct 05, 2012, 03:19 PM
VDN
VDN
Registered User
I cannot buy native ESC IFLY 10A. They offer Hobbywing Fentium V4 Version 10A Brushless ESC for IFLY-4 Quadcopter/ RC Airplane.
IFLY-4 will work properly with 3 Brushless ESC IFLY together with 1 Hobbywing Fentium V4 Version?
Oct 06, 2012, 08:14 AM
Wannabe B-26 pilot!
Matt Halton's Avatar
Just got word that mine has been dispatched from HK..now wondering how long it will take to reach the UK. Saw on their site they are out of stock again..


Hate waiting for this, hope it will be worth it!
Quote:
I will lift a gopro easy with the props that come with it
Thanks tech69x
Oct 12, 2012, 05:27 AM
Registered User
staib's Avatar
Hi Matt - good luck with the new quad. Please do share your first impressions, as there are many of us lurkers, keeping a very close eye on developments!

Cheers,
Nick
Oct 12, 2012, 09:15 AM
Yes, it will go verticle
My Quad came in yesterday. It apears to be well built. It came with the latest program installed. The instructions for programming are a little vague. I'm going to try and fly it today.
Oct 12, 2012, 09:20 AM
Wannabe B-26 pilot!
Matt Halton's Avatar
Quote:
Originally Posted by vettebob View Post
My Quad came in yesterday. It apears to be well built. It came with the latest program installed. The instructions for programming are a little vague. I'm going to try and fly it today.

Good for you Bob! Did yours come from HK? Mine was posted on the 5th, with a China Post tracking number that doesn't work..
Still encouraging to hear someone has got theirs

I look forward to reading about what you you think of it, and anything else.Please don't forget to put up a few pictures

Nick, Bob can share his first impressions with us now..I wish mine would hurry up and get here!

Matt
Last edited by Matt Halton; Oct 12, 2012 at 09:46 AM.
Oct 12, 2012, 09:45 AM
Yes, it will go verticle
Ordered mine from hobby king as well. It took it 7 Days to get here after they said it shipped. Apparently there is a backlog for their postal system after they have a holiday. It actually came from China not Hong Kong. 5 days to the USA then delivered in 2.
Oct 12, 2012, 10:00 AM
Yes, it will go verticle
I checked the props for ballance 2 were very close 2 were way out. I did hover it briefly last night. It almost will hover hands off. It requires very small inputs to keep it exactly where you want it except for the throttle which is not so sensitive. Altitude hold doesn't work in a small room with heli indused wind everywhere. expected this as it uses a barometer for altude hold. I used a 2450 3s pack and it hovers at just above 1/4 throttle. I will probably program expo on the aileron and elevator channels on my Aurora 9 Transmitter.
Oct 12, 2012, 11:25 AM
Wannabe B-26 pilot!
Matt Halton's Avatar
Quote:
Originally Posted by vettebob View Post
Ordered mine from hobby king as well. It took it 7 Days to get here after they said it shipped. Apparently there is a backlog for their postal system after they have a holiday. It actually came from China not Hong Kong. 5 days to the USA then delivered in 2.
Mine was dispatched 7 days ago too, so maybe it will turn up tomorrow or Monday...Did you have a tracking number, and did it work? My number shows up nothing Mine was from mainland China too, from their backwarehouse..

Matt
Oct 12, 2012, 11:26 AM
Wannabe B-26 pilot!
Matt Halton's Avatar
Quote:
Originally Posted by vettebob View Post
I checked the props for ballance 2 were very close 2 were way out. I did hover it briefly last night. It almost will hover hands off. It requires very small inputs to keep it exactly where you want it except for the throttle which is not so sensitive. Altitude hold doesn't work in a small room with heli indused wind everywhere. expected this as it uses a barometer for altude hold. I used a 2450 3s pack and it hovers at just above 1/4 throttle. I will probably program expo on the aileron and elevator channels on my Aurora 9 Transmitter.
All in all, it sounds encouraging so far, looking forward to reading of your outdoor flights


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted PARIS - MultiWiiCopter aerial photography board mcguyver9111 Aircraft - Electric - Multirotor (FS/W) 3 Feb 25, 2012 10:42 PM
Wanted PARIS - MultiWiiCopter aerial photography board - v4.0 LLC semi-naked or populated mcguyver9111 Aircraft - General - Miscellaneous (FS/W) 1 Feb 23, 2012 02:18 PM
Discussion S-606 Aerial photography combo/TMF Pro FC batusaix Multirotor Drone Talk 7 Feb 03, 2012 03:39 AM
Discussion Vimeos Group Aerial photography & video also on facebook aeropics Aerial Photography 0 Sep 12, 2011 02:25 PM
Discussion Use of RC Aircraft for Aerial Videos and Photography BJADA Aerial Photography 1 Sep 06, 2011 04:35 PM