doc try a 13x7 xoar or a 13x6.5 apc. The xoar has way more thrust, just stings like a b!tch when you crack a prop.

The 13" prop really accelerates like no other and I think it will fit your flying style very well.

Originally Posted by stgdz

doc try a 13x7 xoar or a 13x6.5 apc. The xoar has way more thrust..............,
The 13" prop really accelerates like no other and I think it will fit your flying style very well.

My LHS just started carrying them, so I am going to slowly switch over to Zoar. I just have to get down there and pick up a few.

........ just stings like a b!tch when you crack a prop.

The 16/8 Xoar that I use on my 60" planes is something like $12!

I'm running the 2820 700

Originally Posted by Doc Austin

The 16/8 Xoar that I use on my 60" planes is something like $12!

That is a good price. Where from?

Oh, nevermind. It's the white ones that are expensive.

Originally Posted by Doc Austin

The 16/8 Xoar that I use on my 60" planes is something like $12!

9 bucks for the 13" isn't fun either.

buy them in 3 packs from tower and with the coupons the 14x7 come out to 8.07 a piece, not to bad

Originally Posted by Inverted-I-Fly

I'm running the 2820 700

14 x 7 is perfect for that motor

Originally Posted by Inverted-I-Fly

buy them in 3 packs from tower and with the coupons the 14x7 come out to 8.07 a piece, not to bad

I picked up a new set of hitec servos from tower. The three pack discount on hs65's is a great deal. I believe they were, three for eighty, after adding a hs85mg, it gets you over 100$, and you can apply a 10$ discount, add in free shipping(super saver club),or 5$ more for USPSP,and a complete set of Hitec servos cost right around a hundred bucks.. Not bad for tower!

Because I saved a bunch on my servos, i treated my laser to one of those expensive white PJN's with the red tips... I think it was 18$ bucks! I didn't look, I just pressed send..

Tim,
have you used the 5065's?

Just wondered how they compare

I never really look at the xoar prices either when I buy but when I smack one yeah I know the price. The last time I looked I was going to get 12 for about a hundred bucks.

Originally Posted by Dead

Tim,
have you used the 5065's?

Just wondered how they compare

IRG runs them, and is very happy..

Ive heard the analogs are more durable for this size plane, so I stick with what I know.

I am now using a 14 x 7 Aeronaut on my 48 Edge. The power is as good or better than the Xoar imo but it does pull a few more amps. It is extremely stiff and does not break unless you really really try hard!

negative on the 5065s. I pulled them and replaced with analogs at the first opportunity.

the 5065s don't seem to offer any advantages and they seemed more fragile to me.

Thanks fellers

Originally Posted by Irg

negative on the 5065s. I pulled them and replaced with analogs at the first opportunity.

the 5065s don't seem to offer any advantages and they seemed more fragile to me.

good to know! Thought you liked them..