New Products Flash Sale
Thread Tools
Old Feb 24, 2012, 02:25 PM
Keenan smith is offline
Find More Posts by Keenan smith
was geht , müssen unten kommen
Keenan smith's Avatar
yeah why not ill build an rc glider
Sign up now
to remove ads between posts
Old Feb 24, 2012, 04:45 PM
Keenan smith is offline
Find More Posts by Keenan smith
was geht , müssen unten kommen
Keenan smith's Avatar
Quote:
Originally Posted by chochmah View Post
Well, if you don't care I won't care.

If you want to get into airliners, buy this and build this:

http://www.scale-parkflyer.de/Depron...n-MD80-83.html
i edited the original post! Duh:P !!!
Old Feb 24, 2012, 05:56 PM
**neons** is offline
Find More Posts by **neons**
5,200 Led Lighted Bike-Bob P.
**neons**'s Avatar
Keenan,
One issue I do not see here is getting the engines wired up so they work ok. Long leads can give motor blackouts. I had a hard time getting info on 4 engines so I went ahead and did my own plan with a 7 Amp BEC. This may not be enough for handling larger servos in any amounts. I would try to make contact with the builder of the larger B-36 plane guy if it is E-Power to have a look at his system. I had guys in electronics say my system will not work and fail. Not yet anyways. They never offered me a wiring system. I used some 10AWG wire near the batteries and tapered down to 12AWG further out. Weight climbs fast with components. I made up my own servo wires to length after the splitters also.

**Neons** Bob
Old Feb 24, 2012, 06:00 PM
Keenan smith is offline
Find More Posts by Keenan smith
was geht , müssen unten kommen
Keenan smith's Avatar
how abot speed controls and batts in the wing = shorter cables plus ill have alot of space inside the scale box structure
Keenan
Old Feb 24, 2012, 06:12 PM
Won2Race is offline
Find More Posts by Won2Race
Registered User
Won2Race's Avatar
You can make the battery side leads as long as you want if you put enough capacitors on the battery side to control the voltage ripple.
RCG Plus Member
Old Feb 24, 2012, 06:21 PM
Keenan smith is offline
Find More Posts by Keenan smith
was geht , müssen unten kommen
Keenan smith's Avatar
i still think batteries in the wingbox should work
Old Feb 24, 2012, 07:31 PM
Legot is offline
Find More Posts by Legot
Build to Fly? FLY to BUILD!
Legot's Avatar
Batteries in the wings?
That would be awesome, not only would it be awesome it would increase the payload capacity like it does on the real one.

Are you going to be hauling anything in this bird? I'm sure you could load it up with some RC tanks made of steel and lead bricks and it would still fly fine
Old Feb 24, 2012, 08:03 PM
Keenan smith is offline
Find More Posts by Keenan smith
was geht , müssen unten kommen
Keenan smith's Avatar
After the maiden my freind
Old Feb 24, 2012, 09:48 PM
JSS4 is offline
Find More Posts by JSS4
I'm BIG on micros
Signed on. This will be one impressive build!
Old Feb 24, 2012, 09:50 PM
JSS4 is offline
Find More Posts by JSS4
I'm BIG on micros
Oh, and Good Luck!
Old Feb 25, 2012, 10:00 AM
Keenan smith is offline
Find More Posts by Keenan smith
was geht , müssen unten kommen
Keenan smith's Avatar
Thanks JSS4,

im gonna need all the luck i can get
Old Feb 25, 2012, 12:26 PM
CafeenMan is offline
Find More Posts by CafeenMan
Registered User
Is it done yet?
Old Feb 25, 2012, 12:28 PM
Jimbo45cn is offline
Find More Posts by Jimbo45cn
Registered User
Jimbo45cn's Avatar
Batteries, and escs in the wings work fine.I don't care how many capacitors you use, you want to keep battery to esc leads short. There really isn't any issue lengthening motor leads. Speaking from experience. Have a 10 lb A26 with everything in the wings, and have run motor leads over 2 feet in length with zero problems. Jim
Old Feb 25, 2012, 12:47 PM
Keenan smith is offline
Find More Posts by Keenan smith
was geht , müssen unten kommen
Keenan smith's Avatar
Quote:
Originally Posted by CafeenMan View Post
Is it done yet?
Man are crazy !!

"Man, are you Crazy?!?!" - WilsonTech1 Club Remix (Produced by SurajOnTheBeat) (0 min 36 sec)
Old Feb 25, 2012, 12:50 PM
Keenan smith is offline
Find More Posts by Keenan smith
was geht , müssen unten kommen
Keenan smith's Avatar
Quote:
Originally Posted by Jimbo45cn View Post
Batteries, and escs in the wings work fine.I don't care how many capacitors you use, you want to keep battery to esc leads short. There really isn't any issue lengthening motor leads. Speaking from experience. Have a 10 lb A26 with everything in the wings, and have run motor leads over 2 feet in length with zero problems. Jim
my plan is to have the batteries in the wingbox with the esc's 6" away with there heatsinks poking out of the wing and then the motor wires down to the motors ??

Keenan


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Antonov An-225 Ottomite Scratchbuilt EDFs 1 Apr 24, 2011 01:05 AM
Help! Antonov AN-225 plans needed Chaparro1973 Scratchbuilt EDFs 13 Apr 17, 2011 01:48 PM
Cool Aero Ace Scale Antonov An-225 catman529 Micro Ready-to-Fly 3 Mar 16, 2008 04:16 PM
Antonov AN-225 aids Electric Ducted Fan Jet Talk 12 Jan 17, 2005 07:03 PM
Antonov 225 anyone? microflyer77 Electric Ducted Fan Jet Talk 4 Jan 29, 2002 12:03 PM