Hobbyking SLICK 3D 1.3M Really Official Build Thread - Page 309 - RC Groups
Thread Tools
Nov 19, 2012, 12:34 AM
how'd I do that....oh
chop stiX's Avatar
Hoverin
That's a neat nice build.lookin good.
Where'd you get the covering for your rudder?
It looks damn close to the original
Had a close call on saturday,on my 2nd flight it felt like I had almost no elevator,so I though my servo is busy saying good bye,as I landed I saw i had maybe 25* of throw.upon inspection I see that the horn had started pulling out and was halfway out
Damn I was lucky,10 more seconds and I would probably had firewood
So slapped some epoxy in,and all good now again.
Sign up now
to remove ads between posts
Nov 19, 2012, 02:22 AM
3D apprentice
Hoverin's Avatar
Thanks chop, yeah it came together nicely. Ball links should be here anytime now to finish it off...
That covering looks better in photo, it's actually a fair bit brighter, you can sort of pick this up in photo #6. It's this one...
http://www.hobbyking.com/hobbyking/s..._5mtr_118.html

But I would recommend the covering Steve posted here..
https://www.rcgroups.com/forums/showp...postcount=1260

Lucky with the servo too mate. Losing an elevator is no fun.... I lost my Extra 260 to a failing elevator servo....

This is a nice combo for an afternoons entertainment The Ultimate certainly lives up to it's name...
Name: thumb-IMG-20121118-00781.jpg
Views: 68
Size: 7.1 KB
Description:
Nov 19, 2012, 04:42 AM
how'd I do that....oh
chop stiX's Avatar
Quote:
Originally Posted by Hoverin
Thanks chop, yeah it came together nicely. Ball links should be here anytime now to finish it off...
That covering looks better in photo, it's actually a fair bit brighter, you can sort of pick this up in photo #6. It's this one...
http://www.hobbyking.com/hobbyking/s..._5mtr_118.html

But I would recommend the covering Steve posted here..
https://www.rcgroups.com/forums/showp...postcount=1260

Lucky with the servo too mate. Losing an elevator is no fun.... I lost my Extra 260 to a failing elevator servo....

This is a nice combo for an afternoons entertainment The Ultimate certainly lives up to it's name...
Attachment 5313726
Cool I'll have a squize at that
Oh yes I LOVE my AMR.so much fun
Nov 19, 2012, 09:52 AM
Registered User
Marwin's Avatar
Quote:
Originally Posted by Hoverin
Hi Marwin, total length is 32mm. I haven't drilled the holes yet as you can see but I would estimate 23mm (roughly) center to center
Thnx m8
Nov 19, 2012, 01:27 PM
Atleast It's in one piece
Hi Guys

A short update to my woes, the new cowl turned up so that was good the weight of the model was down to 58oz which I think helped with the way it’s flying. Unfortunately I managed to rip the under carriage off the only spare I had was from a extinct Eratix so what with the repair plus some blocks of ply to bring the recess out flush the weight is back up to just under 60oz.
Also one of my fellow flyers came up to me yesterday and jokingly said have I put the wings on the right way round, I gave him a puzzled stare and he pointed out the right hand wing has a flatter top profile compared to the left wing. I picked the model up and had look and he was right although the difference is subtle it looks almost as if someone and run a sanding block along the top of the outer third of the wing ribs.
Now I don’t know if this would have any affect on the flying but would it be possible if this is what’s giving me some of the quirky behaviour.

Arcright
Nov 20, 2012, 11:11 AM
Micro Boat Forum Founder
boredom.is.me's Avatar
I built both of these. Mine is the close one.

Name: ImageUploadedByTapatalk1353427824.512260.jpg
Views: 142
Size: 108.5 KB
Description:
Nov 20, 2012, 11:40 PM
Registered User
kinshas's Avatar
Hi guys! I lost my Slick!

The low exit from the blender and my plane met with the fence!
Last edited by kinshas; Nov 20, 2012 at 11:48 PM.
Nov 20, 2012, 11:59 PM
how'd I do that....oh
chop stiX's Avatar
Quote:
Originally Posted by boredom.is.me
I built both of these. Mine is the close one.

Attachment 5316586
Boredom there is just one thing missing on both of them.....a spinner the slickeroooo just looks much slicker with a spinner
Quote:
Originally Posted by kinshas
Hi guys! I lost my Slick!

The low exit from the blender and my plane met with the fence!
Ahhh damn sorry to hear repairable or completely toast?where's the vid?
Nov 21, 2012, 12:54 AM
Micro Boat Forum Founder
boredom.is.me's Avatar
Quote:
Originally Posted by kinshas
Hi guys! I lost my Slick!

The low exit from the blender and my plane met with the fence!
NOOOOOOOO!

Quote:
Originally Posted by chop stiX
Boredom there is just one thing missing on both of them.....a spinner the slickeroooo just looks much slicker with a spinner


Ahhh damn sorry to hear repairable or completely toast?where's the vid?
Ya, the far one isn't flight ready. Mine has a Scorpion 3020 so I need a spinner with the adapter built in. I believe an E-flite spinner should work.
Nov 21, 2012, 01:44 AM
how'd I do that....oh
chop stiX's Avatar
Quote:
Originally Posted by boredom.is.me

Ya, the far one isn't flight ready. Mine has a Scorpion 3020 so I need a spinner with the adapter built in. I believe an E-flite spinner should work.
yes it will or like mine.
https://www.rcgroups.com/forums/atta...mentid=4912610
Nov 21, 2012, 02:01 AM
Tree Trimmer
bonner's Avatar
Quote:
Originally Posted by boredom.is.me
I built both of these. Mine is the close one.

Attachment 5316586
They look identical
Nov 21, 2012, 03:29 AM
3D apprentice
Hoverin's Avatar
Quote:
Originally Posted by kinshas
Hi guys! I lost my Slick!

The low exit from the blender and my plane met with the fence!
Oh man. Is it fixable? I'm with chopstix, where is the video
Nov 21, 2012, 04:33 AM
Registered User

Color of covering film


Hi Slick pilots,

I damaged the rudder in the last transport in my car. So I have to re-cover the rudder with Oracover film, but I'm not sure what color-code will fit.

In earlier posts I saw, that some people have made a bigger rudder for the Slick. They should now the right color.

3 films seem to fit:
Oracover Orange
Oracover fluorescent Orange
or Oracover fluorescent signal Orange

Can anyone of you help me, as I don't have a hobbyshop nearby to check the right color.

br,
Christian
Nov 21, 2012, 04:37 AM
how'd I do that....oh
chop stiX's Avatar
Hi Christian.
I would say the 3rd one is pretty spot on.
your not maybe Christian from 50 shades of grey? hehehehehe
Nov 21, 2012, 06:54 AM
Registered User
Hi Chop Stix,

thanks for your reply. Are you sure with your answer or is it just a guess?
And, I'm not Christian Gray from 50 shades of grey

Additionally, I contacted Hoverin (he made a new rudder, post 4616), maybe he can give me an advice.

br,
Christian


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Turnigy SLICK 3D 1.3M -HOBBYKING Official Build Thread will3d4food 3D Flying 1979 Aug 17, 2017 05:50 PM
Discussion Official Hobbyking 720p HD Camera Thread jaskel FPV Equipment 541 Dec 07, 2016 05:16 PM
Build Log The Official Raven 3M build thread has begun. Windependence Sailplane Talk 1561 Aug 26, 2016 02:45 PM
Discussion Official-Twisted Hobbys Extra Slick 32" Slickinsaneness Build/Fly Thread Tom K. 3D Foamies 1377 Apr 06, 2016 07:24 AM
New Product HK DuraFly Micro Slick 360 2S - Official Thread will3d4food Scratchbuilt Indoor and Micro Models 879 Feb 28, 2015 12:14 PM