correct hookup for pressurized fuel tank - RC Groups
Thread Tools
Oct 14, 2003, 03:04 PM
Registered User
Question

correct hookup for pressurized fuel tank


Hi Guys,
What is the correct hookup on the cap of a pressurized fuel tank? I know the line in tank with clunker goes to carb. But... does the vent line in the tank with curves up into the bubble of the tank hook up to the muffler pressure valve? When the tank is full won't this push fuel into the muffler? Are these the only two lines needed going into the fuel tank cap?
Thanks,
The Rookie
Sign up now
to remove ads between posts
Oct 14, 2003, 04:12 PM
most exalted one
Yes it will push fuel into muffler. Tells you the tank is full!
You can go as described or have a third line for fueling which needs to be plugged except for refueling.
Oct 14, 2003, 04:29 PM
Registered User
pda4you's Avatar
You just disconnect it when you fuel, so it does not fill the muffler.

Mike
Oct 14, 2003, 06:29 PM
Carrying a lot of weight!
therotund1's Avatar
Or you can leave the pressure line hooked up while you fill PROVIDED that it the muffler is below the cylinder/head (I.E. horizontal or inverted mounted engine) and pointed down. When fuel drools out, tanks full!

Dave,
drooler....
Oct 15, 2003, 09:39 AM
Registered User
Thanks guys!!!!!!!!!