TechOne Mini Yak-54 1s BRUSHED - RC Groups
Thread Tools
This thread is privately moderated by BladeScraper, who may elect to delete unwanted replies.
Feb 14, 2012, 07:26 PM
Custom User Title
Discussion

TechOne Mini Yak-54 1s BRUSHED


Ordered a TechOne mini Yak-54 and powering it with the UMX Extra 300 Guts.

I just need to finish my Giant Yak before I can build the Mini one.
Last edited by BladeScraper; Feb 14, 2012 at 07:40 PM.
Sign up now
to remove ads between posts
Mar 08, 2012, 01:53 PM
Registered User
bcamphaus's Avatar
YES! I did the exact same thing using the guts from a 4 site and I absolutely love this plane. I followed the exact setup as the UMX 300 for placement of the AR6400l, servos, pushrod guides, etc. I did not put on the landing gear. I also cut the tape and used blenderm to reattach the ailerons, elevator, and rudder. It is a lot more durable than the 300 also. Good luck!
Mar 08, 2012, 03:43 PM
Custom User Title
Aww, dang. its VERY heavy! How did you get yours so light? i'm going to use a 5x4.3 GWS but mine is 30G without battery! And I want to try some bigger batteries!
Apr 06, 2012, 07:34 AM
Registered User
bcamphaus's Avatar
Did you ever get this working? I built a techone mini eagle with the 2s setup and could never get it light enough to perform well. When I setup the yak with the AR6400, it performed wonderfully. I was able to hover for a very long time... as long as I could with the umx 300. I'm using 160mah 25c batts. Also, I didn't install the landing gear to help keep the weight down.
Apr 06, 2012, 04:18 PM
Custom User Title
Yes, but it is still too heavy.... and I'm nout using the 5x.3, I'm using the Stock or Sukhoi prop.

https://www.rcgroups.com/forums/show....php?t=1565506

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cool Techone mini Yak-54 setup BladeScraper Scratchbuilt Indoor and Micro Models 96 Apr 09, 2012 07:30 AM
Discussion Techone Mini Yak-54 setup 1s or 2? kiwilama Scratchbuilt Indoor and Micro Models 51 Feb 29, 2012 05:57 PM
Wanted Techone Yak-54 or Techone Paiget BladeScraper Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 0 Jan 01, 2012 05:32 PM
Discussion techone yak 54 andrew385 3D Foamies 12 Aug 05, 2011 02:08 PM
Sold FS or FT Techone Mini-Yak 54 BNF or RX Ready rdr4evr69 Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 6 Dec 03, 2009 05:44 PM