Thread Tools
Feb 12, 2012, 03:19 AM
Registered User
Discussion

XA Hexa Custom Build By AddictivRC with DJI Wookong-M FC


I Finished this Small Hexa Build (535mm) With DJI-Wookong-M FC last week.

Specs of Build:

Hexa Frame: XA DIY Hexa 535mm

Motors: T-Motor MT2216-10 Kv: 900

ESC'S: DJI 30amp

Props: Graupner 9 x 5 E-Prop

Flight Controller: DJI Wookong-M

Radio: DX8 with AR8000 RX

LiPo: 3S 6000mah

Remarks:

I am very happy with the Stability of this Set-up

Super Smooth Flight in a Compact Package.

Next: XA Camera Mount and GoPro for nice AP Applications.

All parts in this build are from RcHobbyHelicopter.com

Custom Built by John Wood
Sign up now
to remove ads between posts
Feb 12, 2012, 08:16 AM
Registered User
jetbootz's Avatar
this looks very nice. I am thinking about a similar setup.

Can I ask : What size Graupner Hub adaptors did you use to fit the props to the RCTigermotors?? Is it the 6mm ones ?

cheers

oh and show us some video please !
Feb 12, 2012, 08:24 AM
Registered User
rinatka7's Avatar
Graupner hab hole is 8mm
Rctigermotor MT2216 prop adapter is 5mm, so you need 8mm->5mm
Like this one - https://www.electricwingman.com/grau...r/8mm/5mm.aspx
But they fit in to a prop very very hard!
Sorry for my language!
Feb 12, 2012, 03:26 PM
Registered User
jetbootz's Avatar
perfect , thanks
Feb 12, 2012, 05:23 PM
Registered User
Quote:
Originally Posted by jetbootz
this looks very nice. I am thinking about a similar setup.

Can I ask : What size Graupner Hub adaptors did you use to fit the props to the RCTigermotors?? Is it the 6mm ones ?

cheers

oh and show us some video please !
5MM Spacer.
Feb 12, 2012, 05:50 PM
Registered User
Quote:
Originally Posted by jetbootz
this looks very nice. I am thinking about a similar setup.

Can I ask : What size Graupner Hub adaptors did you use to fit the props to the RCTigermotors?? Is it the 6mm ones ?

cheers

oh and show us some video please !
Will do as soon as I find Time.
-John W.
Feb 13, 2012, 03:33 PM
Catch the vision
KopterVision's Avatar
Quote:
Originally Posted by jetbootz
this looks very nice. I am thinking about a similar setup.

oh and show us some video please !
Ditto. I like this setup and would like to have it with a gimble that is sized to fit a Sony NEX-5N/7.

Is that possible with the XA-CM130C-TPS - Xaircraft X650 CM130C-TPS?
Feb 13, 2012, 04:29 PM
Multirotors blow
georgebinns's Avatar
Quote:
Originally Posted by johnIn2SonAZ
I Finished this Small Hexa Build (535mm) With DJI-Wookong-M FC last week.

Specs of Build:

Hexa Frame: XA DIY Hexa 535mm

Motors: T-Motor MT2216-10 Kv: 900

ESC'S: DJI 30amp

Props: Graupner 9 x 5 E-Prop

Flight Controller: DJI Wookong-M

Radio: DX8 with AR8000 RX

LiPo: 3S 6000mah

Remarks:

I am very happy with the Stability of this Set-up

Super Smooth Flight in a Compact Package.

Next: XA Camera Mount and GoPro for nice AP Applications.

All parts in this build are from RcHobbyHelicopter.com

Custom Built by John Wood
Hi John,

Almost the same set up I have - great minds think alike!!! I've got nearly 10 hours flying on the clock now and am loving it!

I will be interested to see how yours performs with a camera fitted. Despite this very stable platform, I am having a lot of issues with resonance vibration on my machine and was wondering if it was down to the frame design and material or the relatively cheap RCTimer motors I fitted.

By the way, my Graupner 9x5 E-Props were 5mm out of the packet and dropped straight on to the RCTimer shafts didn't need to use any spacer.

I have the XA C130 gimbal on my X650V-8 but don't like it for anything bigger than a GoPro - too much vibration transmitted to a heavier camera!

Here is a short video from the weekend.

Spyglass cam 110212.mp4 (1 min 44 sec)


George.
Last edited by georgebinns; Feb 13, 2012 at 04:39 PM. Reason: Added picture and video


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product DJI WooKong-M Autopilot System for multirotors **Owners Thread** DJI INNOVATIONS Multirotor Drone Electronics 20299 Apr 12, 2017 06:23 PM
Discussion DJI F550 Hexa Custom Build by AddictiveRC johnIn2SonAZ Multirotor Drone Talk 31 Mar 18, 2012 04:23 PM
Cool Karbonic-XXL 50CM DJI WooKong-M frame superdave42 Multirotor Drone Talk 12 Mar 09, 2012 10:01 AM
Discussion New WK-M: Every motor on the XA Hexa starts up as soon as it's powered up. brianshell Multirotor Drone Talk 8 Jan 15, 2012 03:11 AM
New Product DJI WooKong-M View and WooKong-M Click&Go copteryx Multirotor Drone Talk 3 Nov 22, 2011 11:13 PM