Thread Tools
Old Feb 27, 2012, 09:41 PM
scorpion1 is offline
Find More Posts by scorpion1
I feel the need for speed!
scorpion1's Avatar
Do yourself a favor and err on the side of it being too far forward...............you can always move batts backwards if needed. I have all my batts in the cockpit which is fine, its just that i'm lucky i didnt have to position some in the sponsons.
Sign up now
to remove ads between posts
Old Feb 28, 2012, 02:37 AM
stiks is offline
Find More Posts by stiks
Registered User
stiks's Avatar
Scorp..sorry for being dense..do you mean move it closer to the front or back of the boat?

Also, recieved update from OSE...the "nipples" are not included with the new dual pickup rudder....my nipple search continues...lol...any ideas?
Old Feb 28, 2012, 03:09 AM
Punisher_67 is offline
Find More Posts by Punisher_67
Another Dumb Canadian
Punisher_67's Avatar
Just chiming in..........nice project
Old Feb 28, 2012, 05:29 AM
bill34207 is offline
Find More Posts by bill34207
Redneck Injuneer
bill34207's Avatar
Quote:
Originally Posted by stiks View Post
Scorp..sorry for being dense..do you mean move it closer to the front or back of the boat?

Also, recieved update from OSE...the "nipples" are not included with the new dual pickup rudder....my nipple search continues...lol...any ideas?
Go back one page to post 143 by oscarel. Theres an embedded link to where you can buy them.

PS Hi Pete
RCG Plus Member
Latest blog entry: Freewing 80 mm Mig 21 Fishbed
Old Feb 28, 2012, 09:03 AM
scorpion1 is offline
Find More Posts by scorpion1
I feel the need for speed!
scorpion1's Avatar
Forward..................towards the front!! Just make sure to figure out how the flex will fit/reach the motor position. You will also need to make sure that you dont have too much flex exposed before the coupler.

Look at a few pics of my innards and just make sure its at least there or a bit more forward. Even if you mount it in the same place it should be OK since it weighs a bit less than my 2028.
Old Feb 28, 2012, 12:09 PM
stiks is offline
Find More Posts by stiks
Registered User
stiks's Avatar
Scorp..thanks..starting the tear down tonight..will post pics..

Bill thanks for the pointer back to that other post...i had tried it from home or somewhere and it didnt work..so i passed it by..its working today...

Oscarel...is that the size you think for that dual pickup rudder blade?? Can i get these from a hardware store....i dont need anything else and to put $2.00 on the card ...the shipping is going to be more then the part!!..lol
Old Feb 28, 2012, 12:32 PM
bill34207 is offline
Find More Posts by bill34207
Redneck Injuneer
bill34207's Avatar
Quote:
Originally Posted by stiks View Post
Oscarel...is that the size you think for that dual pickup rudder blade?? Can i get these from a hardware store....i dont need anything else and to put $2.00 on the card ...the shipping is going to be more then the part!!..lol
It shows them as 10-32 thread. If in doubt try screwing the stub shaft (prop shaft) into the rudder. On a 3/16" shaft it's a 10-32 thread as well
RCG Plus Member
Latest blog entry: Freewing 80 mm Mig 21 Fishbed
Old Feb 28, 2012, 12:46 PM
stiks is offline
Find More Posts by stiks
Registered User
stiks's Avatar
Bill ...got it...had to read it a few times but it make sense...

Punisher...thanks for the "ping"...gotta keep things moving in the boat world..these guys are riding me like "two mules for sister sarah"...about the length of this post..!!..lol
Old Feb 28, 2012, 03:49 PM
oscarel is offline
Find More Posts by oscarel
Registered User
Quote:
Originally Posted by stiks View Post
Can i get these from a hardware store....i dont need anything else and to put $2.00 on the card ...the shipping is going to be more then the part!!..lol
You can try. You also may want to try Speedmaster directly at rossisales.com and see if they might be able to mail you some a little cheaper.
Old Feb 29, 2012, 11:07 AM
stiks is offline
Find More Posts by stiks
Registered User
stiks's Avatar
Found those brass barbed fittings at the local hobby store...they had them in the plane section..1.99 each..
Old Feb 29, 2012, 11:16 AM
stiks is offline
Find More Posts by stiks
Registered User
stiks's Avatar
I took pics of the tear down from last night but had to do it with a different camera..which i dont have an adapter for...i should be able to find some way of uploading in a few minutes..
Old Feb 29, 2012, 11:32 AM
hotlinercort is offline
Find More Posts by hotlinercort
Registered User
Quote:
Originally Posted by stiks View Post
Here are some pictures of the shaft, boat and new dual pickup rudder. The rudder didnt come with the little "hose connections" on it..any idea were i can get those from??

-the new flex drive looks the same size as the existing..
-the new shaft slides pretty much through the hex connector..once i connect it to the motor shaft on one end and then the flex shaft...will it lock in place?
-new dual pickup rudder didnt come with the water "connectors"...
Cool boat man!!!
Old Mar 01, 2012, 03:19 PM
stiks is offline
Find More Posts by stiks
Registered User
stiks's Avatar

Tear down


Here are the pics from the tear down. I tried to get a good shot of the dog nut ...but believe it or not..i am stuck!!

I have never had good luck with grub screws..maybe its my old a@@ tools but i cannot not for the life of me get that screw out so i can take out the shaft. I am going to take it over to a friends house later..he has the good stuff for this sort of thing.. I almost got to the point of stripping it before i stopped. I also thought about cutting it...anyway..

I think some of the wood will have to come out were the batteries will go. Also, trying to think of a way to keep the exhaust cover...it looks pretty cool..
Old Mar 01, 2012, 05:44 PM
scorpion1 is offline
Find More Posts by scorpion1
I feel the need for speed!
scorpion1's Avatar
Check the photos of how i did my gas tank area, batts fit perfect, may give you an idea or two.
Old Mar 01, 2012, 08:18 PM
stiks is offline
Find More Posts by stiks
Registered User
stiks's Avatar
Scorp..thanks i will go back and check..in case i cant really see it ...do you just have the batteries up front or do you have something like foam up there?

Also, i bought some more allen keys to get that grub screw out and none of them have the "bite" to get it .. Should i drill it since i wont really be using this shaft or dog nut?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Exceed Racing 49" Hydro velyter Racing Boats - Internal Combustion 19 Aug 09, 2012 09:09 AM
Build Log Scorps 50" Hydro build scorpion1 Racing Boats - Electric 360 Feb 04, 2012 04:01 PM
Discussion Brushless Hydro Build kruiser7 Racing Boats - Electric 17 Sep 15, 2011 10:51 PM
Discussion 4 Cell 34" OutRigger Hydro Build / Photos / Design Details / 720P Video ryan_t888 Racing Boats - Electric 13 Jul 07, 2011 11:39 AM
Discussion build manual for Hydro Glider dlysell Foamies (Scratchbuilt) 4 Apr 27, 2011 11:22 AM