Feb 08, 2012, 11:48 PM
Team 3DHS / Team JR
Bivens's Avatar
Containers go straight to the 3DHS location on the east coast to be unloaded...then 3dhs ships to ADC.

J31.....you should come down to Knoxville and fly with us at House Mountain sometime...

Mike
Sign up now
to remove ads between posts
Feb 08, 2012, 11:50 PM
3d NOOBular
3DNater's Avatar
Anyone know where to get a Hacker motor repaired? I have a small amount of vibration in mine after dorking it last week. I replaced the prop adapter but the vibration is still there.

A30 12XL.
Feb 08, 2012, 11:58 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by brathanke View Post
Anyone know where to get a Hacker motor repaired? I have a small amount of vibration in mine after dorking it last week. I replaced the prop adapter but the vibration is still there.

A30 12XL.
I would say Aeromodel... They are the distributors of Hacker Motors...

SteveT
Latest blog entry: My hangar...
Feb 09, 2012, 12:02 AM
Registered User
Thanks Bivens,, I've been without wings for 2 months now and I'm going nuts. I was'nt sure of how the relationship worked between the 2. I've also noticed that Espirit models in FL has picked up 3DHS and aparently dropped Sebart..BTW thanks for the invite. I might have to take you up on that sometime
Feb 09, 2012, 12:03 AM
Registered User
more than likely you bent the main shaft. those are pretty simple to replace.
Quote:
Originally Posted by brathanke View Post
Anyone know where to get a Hacker motor repaired? I have a small amount of vibration in mine after dorking it last week. I replaced the prop adapter but the vibration is still there.

A30 12XL.
Feb 09, 2012, 08:43 AM
Goes to eleven!
JK13's Avatar
Subscribed!
Looks good


Joe
Feb 09, 2012, 09:50 AM
iumop ap!sdn w,I
G.P.'s Avatar
Quote:
Originally Posted by J31968 View Post
Thanks Bivens,, I've been without wings for 2 months now and I'm going nuts. I was'nt sure of how the relationship worked between the 2. I've also noticed that Espirit models in FL has picked up 3DHS and aparently dropped Sebart..BTW thanks for the invite. I might have to take you up on that sometime
Sounds like you need more (back up) airframes!
Feb 09, 2012, 09:51 AM
Registered User
jsmith285's Avatar
Quote:
Originally Posted by brathanke View Post
Anyone know where to get a Hacker motor repaired? I have a small amount of vibration in mine after dorking it last week. I replaced the prop adapter but the vibration is still there.

A30 12XL.
Quote:
Originally Posted by SteveTtoooo View Post
I would say Aeromodel... They are the distributors of Hacker Motors...

SteveT
Yep just send it in.
Feb 09, 2012, 10:58 AM
Fly Low
wamsy55's Avatar
Does anyone know the covering colors for the old scheme FB 89" Slick, and is it the same as the blue on the blue/white 68" Velox?
Feb 09, 2012, 11:42 AM
↓↘→ + (punch)
theKM's Avatar
Quote:
Originally Posted by wamsy55 View Post
Does anyone know the covering colors for the old scheme FB 89" Slick, and is it the same as the blue on the blue/white 68" Velox?
I'm pretty sure it's pearl blue and silver. if the blue has a metallic flake to it, it's the pearl.
Latest blog entry: Updated Hatcam - Apr2016
Feb 09, 2012, 11:52 AM
Fly Low
wamsy55's Avatar
Quote:
Originally Posted by theKM View Post
I'm pretty sure it's pearl blue and silver. if the blue has a metallic flake to it, it's the pearl.
Thanks KM.
Feb 09, 2012, 03:29 PM
Registered User
DFflyer's Avatar
So, I guess it's about time I start working on getting my 55" Edge back in the air. Any tips on how to go about repairing the firewall? Should I just glue it back together or start fresh and rebuild it?
Feb 09, 2012, 03:34 PM
TEAM HILLBILLY
aronph's Avatar
Quote:
Originally Posted by DFflyer View Post
So, I guess it's about time I start working on getting my 55" Edge back in the air. Any tips on how to go about repairing the firewall? Should I just glue it back together or start fresh and rebuild it?
i would unbond the joints and make a new one...too bad you live so far away...i got tools and saws n stuff....HOWEVER....theres a guy in the 57 thread that has a laser cutter....I think its "Kwitsi"....take the firewall out and send him the firewall as intact as you can, and tell him to make you 3 or 4 of them
Feb 09, 2012, 03:39 PM
TEAM HILLBILLY
aronph's Avatar
kwiktsi is his name I believe but I cant find the post...send him a pm
Feb 09, 2012, 04:01 PM
Registered User
so.... im waiting for a motor box for my crashed 1.5 buck huck.. today i realised i can fly my 57" at my closest field to my house without too much worries...and so im scratching my head do i need another airframe under 57" size....

so i have edge, extra... and im already dreaming about a slick! IDEALLY it would be a 71, but im not sure if even doing a removable gear and rudder would allow me to take it with me in a bus....

than there is 59 wich would be ideal size for me but as you all are saying it flys so different than other slicks im not so sure...

51? my UBERLIGHT 48" seems to me in a wind going all over the place wich with balsa is NOT ok... is 51" so much better in wind?

42?? i would have all gear for it but wind for me is a big concern....


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Unofficial NQD Tear Into Jet Boat Mod Thread Energy Jet Drive Boats 15370 Mar 21, 2017 10:43 PM
Discussion The Official AirWare Q&A Thread AndyKunz Radios 104 Dec 29, 2016 05:18 PM
Discussion Banana Hobby Customer Support Request/Q and A Thread! banana hobby Banana Hobby 1174 Dec 27, 2016 07:51 PM
Discussion THE FIRST UNOFFICIAL Parkzone Sukhoi mods thread!!!! bluemeane Micro Ready-to-Fly 27 Aug 17, 2009 11:23 PM
Megatech H2O unofficial thread and first rewiew. grk65 Racing Boats - Electric 7 Mar 05, 2007 12:09 AM