New Products Flash Sale
Thread Tools
Old Dec 13, 2012, 06:45 PM
SteveT. is offline
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by jsmith285 View Post
I think the planes are all his. The Short guy in the hanger photo is the Princes RC guy. He does all the building for the Prince. His name is Joseph, believe it or not. They have a big indoor facility that they fly in during the summer because its 125 outside. He also does Helis. Yep said they have 4 flights on it so far. Still tweaking it in he said.
Quote:
Originally Posted by Bigster View Post
Yeah, it used to be fun to think what I could do with limitless money. Now I've seen it.
True that!!!

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Sign up now
to remove ads between posts
Old Dec 13, 2012, 08:52 PM
goflyhighrc is offline
Find More Posts by goflyhighrc
Just go with the flow
goflyhighrc's Avatar
Quote:
Originally Posted by jsmith285 View Post
I think the planes are all his. The Short guy in the hanger photo is the Princes RC guy. He does all the building for the Prince. His name is Joseph, believe it or not. They have a big indoor facility that they fly in during the summer because its 125 outside. He also does Helis. Yep said they have 4 flights on it so far. Still tweaking it in he said.

Was the prince in the video of the first flight, the guy in civilian clothes or the guy at the end Abdullah?
Old Dec 13, 2012, 09:37 PM
AeroKen is offline
Find More Posts by AeroKen
3D? I only got two thumbs!
Fried a servo on my 48" epp yak today. The elevator locked full down at the bottom of a blender, the plane hit the ground at the bottom of one of the resulting back flips before I figured out what was going on, much less what to do about it. At the field I guessed the problem was probably the servo extension got unplugged, but that wasn't it. In the shop at home, while I was fussing with it trying to see if something was loose the servo started smoking. This could be a clue.

But I don't know what it means. The servo is an HS-65MG. The plane has 186 flights on it now. Somewhere around 50 flights ago I redid the setup on all the servos to remove all subtrim and to get a little more travel. The elevator has no subtrim, 9 clicks of up trim. I have a KE mix rudder -> elevator which adds a little up elevator on left rudder, but no down elevator. The servo travel adjust for down elevator is at the upper limit - 150% (radio is a DX8). The elevator itself moves freely, the little gizmo on the servo arm that clamps the push rod rotates freely. I'm using the outside hole on both the control horn and the stock long servo arm. I thought all of that was an OK setup. But I'm suspicious that it fried locked full down and the down travel adjust is 150%. Could I have over driven the servo or something? Is 150% just a little too far?

Any suggestions on where I went wrong would be greatly appreciated. I don't want to fry another servo!

(Could have ended much worse - the only damage to the plane is the prop, the top of the rudder, and a little tear in the epp on the nose. Amazing. The funny part is I actually felt pretty good after I realized the elevator was locked - first time I've crashed a plane for a reason other than dumb thumbs!)
Old Dec 13, 2012, 09:40 PM
PropsnWings is offline
Find More Posts by PropsnWings
Scale Aerobatic Pilot
PropsnWings's Avatar
Depends, did you check to make sure the servo continues to move as long as you have stick to move?
Old Dec 13, 2012, 09:49 PM
AeroKen is offline
Find More Posts by AeroKen
3D? I only got two thumbs!
Quote:
Originally Posted by PropsnWings View Post
Depends, did you check to make sure the servo continues to move as long as you have stick to move?
I'm pretty sure I did. Obviously I was unable to check that after it locked up today though, and it's possible I wasn't careful enough about checking it when I set it up.
Old Dec 13, 2012, 09:51 PM
quadracer is offline
Find More Posts by quadracer
No, I won't ship it. Don't ask
quadracer's Avatar
Sounds like the amplifier fried.
Old Dec 13, 2012, 09:54 PM
3drcparts is offline
Find More Posts by 3drcparts
inverted-i-fly
3drcparts's Avatar
I just lost my 9th hs-65mg, just died on my 42 slick, luckily I caught it in a pre-flight. You should be careful not to push them electronically beyond their physical travel, but that being said, I have just accepted that they don't last forever, especially not in the elevator of an epp 3D plane.

send it back to hi-tec and they will fix/repair
Old Dec 13, 2012, 09:58 PM
AeroKen is offline
Find More Posts by AeroKen
3D? I only got two thumbs!
Quote:
Originally Posted by quadracer View Post
Sounds like the amplifier fried.
That would be the part that drives the motor?

Quote:
Originally Posted by Inverted-I-Fly View Post
I just lost my 9th hs-65mg, just died on my 42 slick, luckily I caught it in a pre-flight. You should be careful not to push them electronically beyond their physical travel, but that being said, I have just accepted that they don't last forever, especially not in the elevator of an epp 3D plane.

send it back to hi-tec and they will fix/repair
Hadn't occurred to me hi-tec would fix it. Thanks!

So how did you catch it preflight? Was it not working at all then, or is there some subtler clue I should keep an eye out for?
Old Dec 13, 2012, 10:31 PM
3drcparts is offline
Find More Posts by 3drcparts
inverted-i-fly
3drcparts's Avatar
Quote:
Originally Posted by AeroKen View Post
That would be the part that drives the motor?



Hadn't occurred to me hi-tec would fix it. Thanks!

So how did you catch it preflight? Was it not working at all then, or is there some subtler clue I should keep an eye out for?
fill in this form at htec and send it in, they have fixed/replace all nine of mine
http://www.hitecrcd.com/support/warr...ice/index.html

I look for the servo starting to jitter, sure sign it is about to go, but this one just stopped working between flights and I caught it during my pre-flight test
Old Dec 13, 2012, 10:35 PM
AeroKen is offline
Find More Posts by AeroKen
3D? I only got two thumbs!
Quote:
Originally Posted by Inverted-I-Fly View Post
fill in this form at htec and send it in, they have fixed/replace all nine of mine
http://www.hitecrcd.com/support/warr...ice/index.html

I look for the servo starting to jitter, sure sign it is about to go, but this one just stopped working between flights and I caught it during my pre-flight test
OK, thanks! The servo was apparently working fine for the first few minutes of the flight. I didn't hear it jittering on the ground, but then I may not have checked well enough. For preflight each time all I do is make sure the surfaces are still moving in the right direction. Probably I should do more.
Old Dec 13, 2012, 10:50 PM
3drcparts is offline
Find More Posts by 3drcparts
inverted-i-fly
3drcparts's Avatar
Quote:
Originally Posted by AeroKen View Post
OK, thanks! The servo was apparently working fine for the first few minutes of the flight. I didn't hear it jittering on the ground, but then I may not have checked well enough. For preflight each time all I do is make sure the surfaces are still moving in the right direction. Probably I should do more.
that is all I do
Old Dec 13, 2012, 10:54 PM
Bivens is offline
Find More Posts by Bivens
Team 3DHS / Team JR
Bivens's Avatar
Quote:
Originally Posted by joshet89 View Post
So whats the current favorite prop for you DA60 guys?
Quote:
Originally Posted by RotorJockey View Post
Haven't used a Vess carbon on the 55 yet, but I LOVE my Stealth 28b on my DA120!
18.5x6W falcon on my GT33
24x9 falcon on the DA60
29x9 falcon on two 120's
30x12 falcon on 170

Every size falcon I've tried has outperformed anything I have had on any of those engines in the past, including several Vess wood, carbon, and Mej carbon props. I'm a falcon fan now for sure....high performance, similar cost, better balance from the factory, not too loud (well, not as quiet as mej, but quieter than vess..)...I really like em.
Old Dec 13, 2012, 11:00 PM
diggity2424 is offline
Find More Posts by diggity2424
Wingman II
diggity2424's Avatar
Quote:
Originally Posted by Bivens View Post
18.5x6W falcon on my GT33
24x9 falcon on the DA60
29x9 falcon on two 120's
30x12 falcon on 170

Every size falcon I've tried has outperformed anything I have had on any of those engines in the past, including several Vess wood, carbon, and Mej carbon props. I'm a falcon fan now for sure....high performance, similar cost, better balance from the factory, not too loud (well, not as quiet as mej, but quieter than vess..)...I really like em.
I've got a Falcon 28x9 coming my way!!!
Old Dec 14, 2012, 08:32 AM
jsmith285 is offline
Find More Posts by jsmith285
Registered User
jsmith285's Avatar
Quote:
Originally Posted by goflyhighrc View Post
Was the prince in the video of the first flight, the guy in civilian clothes or the guy at the end Abdullah?
The Prince.
You know the other guys.
Old Dec 14, 2012, 10:53 AM
teookie is offline
Find More Posts by teookie
Perfect 3pt inverted landing!
teookie's Avatar
You know the prince and I are about the same age. Actually just checked, he's a little younger. He was born in the right family. What a lucky guy. Ha ha.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Unofficial NQD Tear Into Jet Boat Mod Thread Energy Racing Boats - Electric 15189 Today 03:41 AM
Discussion Banana Hobby Customer Support Request/Q and A Thread! banana hobby Banana Hobby 1169 Dec 06, 2016 03:28 PM
Discussion The Official AirWare Q&A Thread AndyKunz Radios 95 Feb 14, 2013 09:36 AM
Discussion THE FIRST UNOFFICIAL Parkzone Sukhoi mods thread!!!! bluemeane Micro Ready-to-Fly 27 Aug 18, 2009 12:23 AM
Megatech H2O unofficial thread and first rewiew. grk65 Racing Boats - Electric 7 Mar 05, 2007 01:09 AM