Oct 21, 2012, 07:01 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by goflyhighrc View Post
Need to replace my elevator joining bar in my 70 Slick, what would be the best material for the joiner.
You might be able to purchase Phenolic here... Phenolic is what is used in the original.

Quote:
Originally Posted by going4speed View Post
I would use bass wood laminated with carbon fiber
I would think there would be too many torsional loads for bass wood... If you would want to use wood, I would suggest "Rock Maple", which can usually be found in good hobby shops as engine mount material...

SteveT
Last edited by SteveT.; Oct 21, 2012 at 08:35 PM.
Sign up now
to remove ads between posts
Oct 21, 2012, 07:07 PM
3DHS 'native'
going4speed's Avatar
I doubt the original is anything but soft ply and carbon fiber. Bass wood is good stuff. What ever works....
Oct 21, 2012, 07:21 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
The originals are made of phenolic....(at least mine were)

SteveT
Latest blog entry: My hangar...
Oct 21, 2012, 07:41 PM
No, I won't ship it. Don't ask
quadracer's Avatar
My 72 has phenolic, and it is wicked stiff.
Oct 21, 2012, 07:42 PM
3DHS 'native'
going4speed's Avatar
My 70 is not phenolic for some reason...weird.
Oct 21, 2012, 07:49 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by going4speed View Post
My 70 is not phenolic for some reason...weird.
Did you buy it new?

SteveT
Latest blog entry: My hangar...
Oct 21, 2012, 08:02 PM
3DHS 'native'
going4speed's Avatar
Yep from the Fredricksburg warehouse during the final sale. Its a laminated wood center with carbon fiber top and bottom.

Quote:
Originally Posted by SteveT. View Post
Did you buy it new?

SteveT
Oct 21, 2012, 08:24 PM
Just go with the flow
goflyhighrc's Avatar
Quote:
Originally Posted by SteveT. View Post
You might be able to purchase Phenolic here... Phenolic is what is used in the original.



I would think there would be too many torsional loads for bass wood... If you would want to use wood, I would suggest "Rock Maple", which can usually be found in good hobby shops as engine mount material...

SteveT
Steve - your buy it here went to a kit build, did you see Phenolic somewhere.
Oct 21, 2012, 08:33 PM
Registered User
skippy78's Avatar
Quote:
Originally Posted by SteveT. View Post
The originals are made of phenolic....(at least mine were)

SteveT
The joiner on the old 70" was wood sandwiched with carbon fiber. The 71" has a phenolic joiner.
Oct 21, 2012, 08:36 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by goflyhighrc View Post
Steve - your buy it here went to a kit build, did you see Phenolic somewhere.
Try it again..... sorry....

SteveT
Latest blog entry: My hangar...
Oct 21, 2012, 09:30 PM
ProBro, 3D
gregory.da's Avatar
Quote:
Originally Posted by Trill View Post
If precision is your concern, the 48" Super Viper is your bird. From what I've seen the 48" SV and 65" Vyper handle wind well.
All my Slicks also handle turbulence well. If you want stability along with the wild side of 3D, the 51" Slick is for you.

I try to choose my planes with future upgrades in mind. The 48" SV uses three
HS 65MG servos and one HS 85MG servo on a 4S battery. The 51" Slick uses four HS 85 MG servos.

The performance of the Vyper will likely overcome your objection to the way it looks. I'm eager to see what my yellow 48" SV can do!

"Excellence is the minimum. Perfection is the standard."

It was a tough choice, but I decided to go with the Yellow 48" Super Viper to maximize the precision, even though I wasn't fond of the fuse shape and the flat fin/rudder design. Hopefully, the those two concerns will go away after I fly it. Of course the Omega 130g is out of stock now....just like the 59" Slick, I need to learn to pull the trigger quicker down the road
Oct 21, 2012, 09:37 PM
Registered User
hertzrepkeith's Avatar
The big Question of the Day! What is the best stuff to use to clean the ultra coat on my 71 slick??
Oct 21, 2012, 09:50 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by hertzrepkeith View Post
The big Question of the Day! What is the best stuff to use to clean the ultra coat on my 71 slick??
This stuff is the same as this stuff....and both work great!! Windex also works...

SteveT
Latest blog entry: My hangar...
Oct 21, 2012, 10:13 PM
Just go with the flow
goflyhighrc's Avatar
Quote:
Originally Posted by hertzrepkeith View Post
The big Question of the Day! What is the best stuff to use to clean the ultra coat on my 71 slick??

I clean mine with either 409 then warm water, then wax them.
Oct 21, 2012, 10:30 PM
Registered User
shadow102's Avatar
ammonia free glass cleaner then some sort of spray wax


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Unofficial NQD Tear Into Jet Boat Mod Thread Energy Jet Drive Boats 15370 Mar 21, 2017 10:43 PM
Discussion The Official AirWare Q&A Thread AndyKunz Radios 104 Dec 29, 2016 05:18 PM
Discussion Banana Hobby Customer Support Request/Q and A Thread! banana hobby Banana Hobby 1174 Dec 27, 2016 07:51 PM
Discussion THE FIRST UNOFFICIAL Parkzone Sukhoi mods thread!!!! bluemeane Micro Ready-to-Fly 27 Aug 17, 2009 11:23 PM
Megatech H2O unofficial thread and first rewiew. grk65 Racing Boats - Electric 7 Mar 05, 2007 12:09 AM