3DHS Fanatics! - Page 556 - RC Groups
Thread Tools
Aug 04, 2012, 08:41 PM
No, I won't ship it. Don't ask
quadracer's Avatar
Yup. These threads move quick...
Sign up now
to remove ads between posts
Aug 04, 2012, 08:48 PM
---- --
9XTremist's Avatar
rcaddict16,
sounded good to me, i thought the km reported it to the isp because i told him it was down, before i talked to you and found out they were updating the index
i hope that's what it was cause, new stock is 3dgoodthing.

michael clyde
Aug 04, 2012, 09:44 PM
Santi
DaaBears's Avatar
hopefully the new stock stays in stock for a while.. tired of seeing out of stock on everything! Their purchaser is seriously underestimating the demands!
Aug 04, 2012, 10:21 PM
Fly low or fly home.
skarface's Avatar
Quote:
Originally Posted by RCAddict16
Sorry! That's what I heard.........
Ok you have not learned yet young grasshopper, once the 3dhs website goes down if someone mentions 3dhs do not take them serious.
Quote:
Originally Posted by UCDme3D
hopefully the new stock stays in stock for a while.. tired of seeing out of stock on everything! Their purchaser is seriously underestimating the demands!
Well better hurry if you plan on ordering something.
Aug 05, 2012, 12:51 AM
Registered User
NeverEnough's Avatar
Just switched my 59 Slick from a 4s setup to a 5s setup with a Torque 4014-570.

Here's a little Arizona Sunset flying.

3DHS 59" Slick on 5s Sunset Flying (4 min 14 sec)
Aug 05, 2012, 12:56 AM
3D Sunset Flier
Buzzed's Avatar
Quote:
Originally Posted by NeverEnough
Just switched my 59 Slick from a 4s setup to a 5s setup with a Torque 4014-570.

Here's a little Arizona Sunset flying.

http://youtu.be/E_qFLdlC9Wg
Very nice! Looks like a great evening of flyin'.

Aug 05, 2012, 01:21 AM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Great job!!!

SteveT
Latest blog entry: My hangar...
Aug 05, 2012, 01:56 AM
Fly More Crash Less
AZAerobat's Avatar
Quote:
Originally Posted by NeverEnough
Just switched my 59 Slick from a 4s setup to a 5s setup with a Torque 4014-570.

Here's a little Arizona Sunset flying.

http://youtu.be/E_qFLdlC9Wg
Looking good Dan.
Aug 05, 2012, 02:04 AM
Registered User
NeverEnough's Avatar
Thanks guys... Lots of fun.
Aug 05, 2012, 04:22 AM
Fly low or fly home.
skarface's Avatar
I always seem to strip the little hitec screws for the 65mg servo's. I don't have the right size screw driver for them so can anybody give me a link to the screw driver I need that will fit these screws?
Aug 05, 2012, 05:42 AM
TEAM HILLBILLY
Eagle34's Avatar
Quote:
Originally Posted by skarface
I always seem to strip the little hitec screws for the 65mg servo's. I don't have the right size screw driver for them so can anybody give me a link to the screw driver I need that will fit these screws?
Where is SteveT? I think he's got the link to them on speed dial. the screwdriver you want is a JIS (Japan Industry Screw) but I don't have Steve's link.
Aug 05, 2012, 07:20 AM
Destructive Tester
jimmy34256's Avatar
Quote:
Originally Posted by skarface
I always seem to strip the little hitec screws for the 65mg servo's. I don't have the right size screw driver for them so can anybody give me a link to the screw driver I need that will fit these screws?

I have a small blue screwdriver from Lowes that has 4 bits with the phillips and straight on each end that works great.
Aug 05, 2012, 08:18 AM
Registered User
starzen's Avatar
Quote:
Originally Posted by skarface
I always seem to strip the little hitec screws for the 65mg servo's. I don't have the right size screw driver for them so can anybody give me a link to the screw driver I need that will fit these screws?
if you are talking about the screws that screw the servo to the wood i use screws that you can use an allen wrench with

Aug 05, 2012, 09:18 AM
Registered User
nebwake's Avatar
Yea the hex head #2 screws can be had on most the big hobby stores, tower, horizon, ect. Dubro makes some of them and are more than worth it... I throw all those stupid chinese phillips screws away...
Last edited by nebwake; Aug 05, 2012 at 10:40 AM.
Aug 05, 2012, 09:41 AM
Registered User
chq28's Avatar
Quote:
Originally Posted by skarface
I always seem to strip the little hitec screws for the 65mg servo's. I don't have the right size screw driver for them so can anybody give me a link to the screw driver I need that will fit these screws?
Quote:
Originally Posted by starzen
if you are talking about the screws that screw the servo to the wood i use screws that you can use an allen wrench with

These are definantly the way to go^


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Unofficial NQD Tear Into Jet Boat Mod Thread Energy Jet Drive Boats 15840 Nov 15, 2017 06:26 PM
Discussion Banana Hobby Customer Support Request/Q and A Thread! banana hobby Banana Hobby 1192 Oct 17, 2017 07:26 PM
Discussion The Official AirWare Q&A Thread AndyKunz Radios 104 Dec 29, 2016 06:18 PM
Discussion THE FIRST UNOFFICIAL Parkzone Sukhoi mods thread!!!! bluemeane Micro Ready-to-Fly 27 Aug 18, 2009 12:23 AM
Megatech H2O unofficial thread and first rewiew. grk65 Racing Boats - Electric 7 Mar 05, 2007 01:09 AM