Shop our Airplanes Products Drone Products Sales
Feb 03, 2013, 08:08 AM
Team Aztech Aeromodels!
zmonster97's Avatar
Quote:
Originally Posted by UCDme3D View Post
Anybody ever have problems getting dual elevators to travel the same??

Wamsy, diggity, and myself have worked on this for hours and we can't get both servos to travel the same distance. Any help would be greatly appreciated. I've never had to setup with a Spektrum before, I only flew Futaba . Here's my setup.

89 slick
Hitec 7955's
DX8
Spektrum 9110 rx
2" SWB Arms

Geometry looks close, but no matter what I do, one always seems to be to be traveling about 10 degrees more than the other.
I'm really striving to get that full elevator deflection but one keeps stopping at 38 degrees when I know it can go past that. I've switched out the servos to make sure it wasn't a programming issue, but it very well could be, it's just happening on more than 2 servos.
Did you select the dual elevator tail type? Then you won't have to do any mixing.

Also, do you have the servo travel set the same for both elevator channels?
Sign up now
to remove ads between posts
Feb 03, 2013, 08:09 AM
OOPS
Manta1's Avatar
Quote:
Originally Posted by UCDme3D View Post
Anybody ever have problems getting dual elevators to travel the same??

Wamsy, diggity, and myself have worked on this for hours and we can't get both servos to travel the same distance. Any help would be greatly appreciated. I've never had to setup with a Spektrum before, I only flew Futaba . Here's my setup.

89 slick
Hitec 7955's
DX8
Spektrum 9110 rx
2" SWB Arms

Geometry looks close, but no matter what I do, one always seems to be to be traveling about 10 degrees more than the other.
I'm really striving to get that full elevator deflection but one keeps stopping at 38 degrees when I know it can go past that. I've switched out the servos to make sure it wasn't a programming issue, but it very well could be, it's just happening on more than 2 servos.
what is your epa set on each channel?
Feb 03, 2013, 08:13 AM
Team Aztech Aeromodels!
zmonster97's Avatar
Quote:
Originally Posted by cale10 View Post
nevermind the wind was calm this morning and it flys great! i was doing rollers off the deck 1 min into the filght. however it is a little under powered. it will go striaht up vertical though!
If you want more power in a cheap motor, get this motor! I have this motor in my 33" epp extra and it is a rocket! Running on 2s with a gws 8x4.3 prop.

http://epbuddy.com/index.php?main_pa...roducts_id=266
Feb 03, 2013, 08:16 AM
C-Main Champ
djmoose's Avatar
My guess is along the lines of what SportFlyer is talking about. I bet the subtrim on one of the servos is limiting your travel.

when you use subtrim, you're loosing throw in that same direction.

Quote:
Originally Posted by UCDme3D View Post
Anybody ever have problems getting dual elevators to travel the same??

Wamsy, diggity, and myself have worked on this for hours and we can't get both servos to travel the same distance. Any help would be greatly appreciated. I've never had to setup with a Spektrum before, I only flew Futaba . Here's my setup.

89 slick
Hitec 7955's
DX8
Spektrum 9110 rx
2" SWB Arms

Geometry looks close, but no matter what I do, one always seems to be to be traveling about 10 degrees more than the other.
I'm really striving to get that full elevator deflection but one keeps stopping at 38 degrees when I know it can go past that. I've switched out the servos to make sure it wasn't a programming issue, but it very well could be, it's just happening on more than 2 servos.
Feb 03, 2013, 08:20 AM
Riley O'Brien
obrieri's Avatar
May want to throw the servo onto a programmer and make sure it doesn't have an end point programmed in it.
Feb 03, 2013, 08:28 AM
Team Aztech Aeromodels!
zmonster97's Avatar

Vyper Bype for sale!


Ok, I'm selling my vyper bype! I thought I would post it here for the addicts before I put it in the classifieds. It is the blue color. It has about 10 flights on it and absolutely no damage whatsoever! It is like brand new! Perfect condition! It has a Motrolfly 3615-750kv motor, ZTW B-series 65a esc, and HS-5085MG servos all around! I am asking $475 for the addicts. LPU only for now. PM me for pics!

Thanks!
Feb 03, 2013, 08:51 AM
Santi
DaaBears's Avatar
Quote:
Originally Posted by obrieri View Post
May want to throw the servo onto a programmer and make sure it doesn't have an end point programmed in it.
I'll have to do this. All the answers mentioned so far have been explored already. Even with no subtrim, the throw is way different. Endpoints both maxed out. Very frustrating! This put me way back so far.
Feb 03, 2013, 08:56 AM
Registered User
just got graphics on my 89 yesterday heres some pics.
P.B.
Feb 03, 2013, 08:58 AM
Registered User
Quote:
Originally Posted by cale10 View Post
hey guys i bought a crack yak lite today. will i like it?
crack yak lite = awesomeness!!
P.B.
Feb 03, 2013, 09:02 AM
Registered User
Quote:
Originally Posted by quadracer View Post
This is an older 48 Velox. A replacement for my burnt Edge.
you will like the velox, they are alot of fun!!
P.B.
Feb 03, 2013, 09:25 AM
C-Main Champ
djmoose's Avatar
Quote:
Originally Posted by UCDme3D View Post
I'll have to do this. All the answers mentioned so far have been explored already. Even with no subtrim, the throw is way different. Endpoints both maxed out. Very frustrating! This put me way back so far.
Did you buy the servos used? If so, I bet one of them has been programmed.
Feb 03, 2013, 09:35 AM
AMA Another Mans Airplane
cale10's Avatar
Quote:
Originally Posted by zmonster97 View Post
If you want more power in a cheap motor, get this motor! I have this motor in my 33" epp extra and it is a rocket! Running on 2s with a gws 8x4.3 prop.

http://epbuddy.com/index.php?main_pa...roducts_id=266
hey thanks! will it work on a 10 amper esc?
Feb 03, 2013, 09:36 AM
Wingman II
diggity2424's Avatar
Quote:
Originally Posted by pb7flyer View Post
just got graphics on my 89 yesterday heres some pics.
P.B.
Looking good P.B. I'm liking all these FB Slicks finally being built.
Feb 03, 2013, 09:37 AM
Wingman II
diggity2424's Avatar
Quote:
Originally Posted by UCDme3D View Post
I'll have to do this. All the answers mentioned so far have been explored already. Even with no subtrim, the throw is way different. Endpoints both maxed out. Very frustrating! This put me way back so far.
Like Moose said. I think your best bet and to be 100% sure is to get a programmer on it.
Feb 03, 2013, 09:45 AM
Registered User
jsmith285's Avatar
Quote:
Originally Posted by pb7flyer View Post
just got graphics on my 89 yesterday heres some pics.
P.B.
nice


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion You are addicted to flying when.... postalflyer72 Electric Plane Talk 34 Jul 16, 2011 11:12 PM
Video Angelo Lomelí flying 3D antics Jorge Fernandez Electric Plane Talk 0 Sep 30, 2006 02:22 PM
Tiger Moth antics - flying inverted w/video SnoJetter Parkflyers 49 Sep 16, 2003 07:25 PM
Help! Getting addicted to Park Flying fly4fun Parkflyers 11 Feb 16, 2002 10:58 AM
You know when your addicted to Slow Flying when..... Gman Parkflyers 51 Aug 05, 2001 03:19 AM