Thread Tools
Jan 17, 2013, 09:25 PM
Time to Fly AJ's Best!
heritageflyer's Avatar
Quote:
Originally Posted by wedoitall
i have a idle up on a throttle curve, i noticed that it studders when motor is first powered up. but doesnt do it in air.

so you think i should start from default and raise it till studder goes away then stop?
What motor, what ESC? High Timing will probably fix it, unless it is a bigger motor than a 48 sized plane.
Sign up now
to remove ads between posts
Jan 17, 2013, 09:28 PM
Registered User
wedoitall's Avatar
im running castle in this atm, but dont know for how long. kinda scared.
Jan 17, 2013, 09:34 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by wedoitall
im running castle in this atm, but dont know for how long. kinda scared.
No reason to be...no more failures with Castle than any other brand...

SteveT.
Latest blog entry: My hangar...
Jan 17, 2013, 09:37 PM
Just go with the flow
goflyhighrc's Avatar
Quote:
Originally Posted by wedoitall
i have a idle up on a throttle curve, i noticed that it studders when motor is first powered up. but doesnt do it in air.

so you think i should start from default and raise it till studder goes away then stop?


Do you have the ESC on "Fixed Endpoint" and did you set it up as such with your TX.
Jan 17, 2013, 09:38 PM
Aerobatic Fanatic
HugoCraft's Avatar
The 103 will be running the .12sec, 444.4oz/in HV Brushless 2270SG Savox servos on all the control surfaces for a total of 3110.8oz/in!!!!!!

Jan 17, 2013, 09:42 PM
3D Wanna Be
sk8rob's Avatar
closed
Last edited by sk8rob; Jan 17, 2013 at 09:58 PM.
Jan 17, 2013, 09:47 PM
Registered User
wedoitall's Avatar
Quote:
Originally Posted by goflyhighrc
Do you have the ESC on "Fixed Endpoint" and did you set it up as such with your TX.
yea fixed endpoints, motorfly 2815-950 13x6.5
Jan 17, 2013, 09:49 PM
Time to Fly AJ's Best!
heritageflyer's Avatar
My new F-22 50mm Mini is all done and ready for Maiden tomorrow afternoon.


Also flew a Maiden on a Flyzone Switch tonight after work for a local college guy, great little Taildragger trainer. High Wing or Middle Wing, flew it in the middle wing config.

Plane flew great on mechanically set Low Rates, stock 2.4 Radio. Was really smooth, I was impressed. With more throws I believe I could 3D it. Plenty of power.

Oh and I got to fly my first little Micro Quad, it's made by Traxxas, QR-1. Landed it in the owner's hand.

Here's the Mini Raptor on the bench after setup. Even coated the bottom with Minwax Clear to protect it from scuffing. Balanced perfect with a Zippy Compact 1800, stock size is 800.
Last edited by heritageflyer; Jan 18, 2013 at 08:52 AM.
Jan 17, 2013, 09:50 PM
Time to Fly AJ's Best!
heritageflyer's Avatar
Quote:
Originally Posted by wedoitall
yea fixed endpoints, motorfly 2815-950 13x6.5
High timing on that one.
Jan 17, 2013, 09:57 PM
TEAM HILLBILLY
3Dplank's Avatar
Quote:
Originally Posted by heritageflyer
My new F-22 50mm Mini is all done and ready for Maiden tomorrow afternoon.


Also flew a Maiden on a Flyzone Switch tonight after work for a local college guy, great little Taildragger trainer. High Wing or Middle Wing, flew it in the middle wing config.

Plane flew great on mechanically set Low Rates, stock 2.4 Radio. Was really smooth, I was impressed. With more throws I believe I could 3D it. Plenty of power.

Oh and I got to fly my first little Micro Quad, think it's made by Traxis. Landed it in the owner's hand.

Here's the Mini Raptor on the bench after setup. Even coated the bottom with Minwax Clear to protect it from scuffing. Balanced perfect with a Zippy Compact 1800, stock size is 800.
woah negative ghost rider the pattern is full Video
Jan 17, 2013, 10:02 PM
Don't Midair Me, Bro!
split_s's Avatar
RF 6.5
huckin
addict
Jan 17, 2013, 10:23 PM
Game on
joesmith285's Avatar
RF 6.5
huckin
Addict
Jan 17, 2013, 10:29 PM
Registered User
wedoitall's Avatar
Quote:
Originally Posted by heritageflyer
My new F-22 50mm Mini is all done and ready for Maiden tomorrow afternoon.


Also flew a Maiden on a Flyzone Switch tonight after work for a local college guy, great little Taildragger trainer. High Wing or Middle Wing, flew it in the middle wing config.

Plane flew great on mechanically set Low Rates, stock 2.4 Radio. Was really smooth, I was impressed. With more throws I believe I could 3D it. Plenty of power.

Oh and I got to fly my first little Micro Quad, think it's made by Traxis. Landed it in the owner's hand.

Here's the Mini Raptor on the bench after setup. Even coated the bottom with Minwax Clear to protect it from scuffing. Balanced perfect with a Zippy Compact 1800, stock size is 800.
looks pretty mean
Jan 17, 2013, 11:15 PM
TEAM HILLBILLY
Eagle34's Avatar
Quote:
Originally Posted by 3Dplank
woah negative ghost rider the pattern is full Video
YES video please. Twin 50mm EDF, looks nice, more info! Bungee launch?
Jan 18, 2013, 06:15 AM
Time to Fly AJ's Best!
heritageflyer's Avatar
Quote:
Originally Posted by 3Dplank
woah negative ghost rider the pattern is full Video
Hang onto your Coffee!!!

Quote:
Originally Posted by wedoitall
looks pretty mean
I like it!

Quote:
Originally Posted by Eagle34
YES video please. Twin 50mm EDF, looks nice, more info! Bungee launch?
Sorry Eagle, only a Single 50mm. This thing is only 19" long, supposed to do like 80 on stock. Planning on a Don's Wicked 6000Kv with his Balanced Fan and 40A-50A ESC next... 100+


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion You are addicted to flying when.... postalflyer72 Electric Plane Talk 34 Jul 16, 2011 11:12 PM
Video Angelo Lomelí flying 3D antics Jorge Fernandez Electric Plane Talk 0 Sep 30, 2006 02:22 PM
Tiger Moth antics - flying inverted w/video SnoJetter Parkflyers 49 Sep 16, 2003 07:25 PM
Help! Getting addicted to Park Flying fly4fun Parkflyers 11 Feb 16, 2002 10:58 AM
You know when your addicted to Slow Flying when..... Gman Parkflyers 51 Aug 05, 2001 03:19 AM