Originally Posted by Mr Big Head
After flying my 60 EF Extra the other day I noticed that both ailerons were down about 3/8ths inch like it had flaperons engaged. It has HS225mgs on the aillerons, an AR 8000 DSMX receiver and a DX8 tx. I knew when I set it up that they were set to neutral so I was baffled. I was able to level them both using sub trim and all was well.
2 days later the same thing happens when I plug a battery into my 48 Super Vyper. Ailerons were both down about 3/8ths inch It has 65MGs on the ailerons and a AR 6210 DSMX. Again the same DX 8 tx. I was able to level them with sub trim.
Now today I plug a battery into the EF 60 inch Extra and bam the ailerons are down again. Fixed again with sub trim and flew it with no issues.
I always hook up my receivers with the right going to ailerons and the left going to aux 1. No Y connectors. On both planes I have flaperons engaged but I do not have any flaperons dialed into the EF plane but I do have them on the Super Vyper. The switch was set to off.
I am thinking this is a tx issue as 2 planes with different systems did the same thing. Any help is appreciated. Mike
Does the servo monitor in the tx show that both ailerons are not centered? If so, it is probably a tx issue.
I would post this in the dx8 thread or pm AndyKunz about it.