3DHS Fly Low Thread - (frequently off topic) - Page 1607 - RC Groups
Thread Tools
Oct 11, 2012, 08:12 PM
It'll be fineee...
RCgirl383's Avatar
Quote:
Originally Posted by heritageflyer
Wow! Must be one Powerful Motor in that EPP Extra!


Never actually tried to lift a dog out of hover!
Lol I have a chihuahua..maybe it could lift him
Sign up now
to remove ads between posts
Oct 11, 2012, 08:25 PM
3D, 1D at a time!
Park_aviator's Avatar
Quote:
Originally Posted by cmala
Gotta drill the servo holes...
Need's to be a bit bigger than that for my 41" Edge... I'm running Hitec HS9999999999999999DG (Diamond Gears )... Any other ones?
Oct 11, 2012, 08:27 PM
It'll be fineee...
RCgirl383's Avatar
Quote:
Originally Posted by Park_aviator
Need's to be a bit bigger than that for my 41" Edge... I'm running Hitec HS9999999999999999DG (Diamond Gears )... Any other ones?
Lol
Oct 11, 2012, 08:28 PM
3D, 1D at a time!
Park_aviator's Avatar
Quote:
Originally Posted by RCgirl383
Lol
It's an amazing plane. Running a DA200 on the nose




Ok, sorry for all the off topic. I'm done now.
Oct 11, 2012, 08:35 PM
Time to Fly AJ's Best!
heritageflyer's Avatar
Quote:
Originally Posted by cmala
Gotta drill the servo holes...
Super Bigfoot??
Oct 11, 2012, 08:40 PM
3D, 1D at a time!
Park_aviator's Avatar
Quote:
Originally Posted by heritageflyer
Super Bigfoot??
More like a full scale but R/C Antonov An-225 Mriya
Oct 11, 2012, 08:57 PM
AMA Another Mans Airplane
cale10's Avatar

Weenie roast at zarks!


ok there is a weenie roast/fun fly this sunday oct. 14 at the zarks flying feild in zanesvill ohio. if you come(which you are 100% allowed) you need to bring hot dogs and other things to roast over a fire. there is NO i repeat NO landing fee and food is free. the fun fly weenie roast begins at 1:00 pm.

DIRECTIONS:

http://ohio.hometownlocator.com/maps...%20airport.cfm scroll down to the map part and hit the satelite button to see it will be much easeir to understand. anyways you have to turn onto VICKERS HILL DR. off of sr 146 between sr16 in zanesville. go 1.5 ish miles and there is a big sign on the right that has a big red bipe on it and says ZARKS.

if the weather is bad it will be re-scheduled to the next sunday.
Oct 11, 2012, 09:12 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by cmala
Gotta drill the servo holes...
Hmmmm....first time you ever held something that big?

SteveT
Latest blog entry: My hangar...
Oct 11, 2012, 09:15 PM
Team Aztech Aeromodels!
zmonster97's Avatar
Quote:
Originally Posted by heritageflyer
Wow! Must be one Powerful Motor in that EPP Extra!


Never actually tried to lift a dog out of hover!
It sure looks like that doesn't it. Haha!
Oct 11, 2012, 09:16 PM
Old Dog learning new tricks~~
bradhoke08's Avatar
Quote:
Originally Posted by SteveT.
Hmmmm....first time you ever held something that big?

SteveT
Hehehe
Oct 11, 2012, 09:17 PM
3D, 1D at a time!
Park_aviator's Avatar
RF6.5
Huckin
Addict


CLOSED
Last edited by Park_aviator; Oct 11, 2012 at 11:06 PM.
Oct 11, 2012, 09:21 PM
Wingman II
diggity2424's Avatar
Quote:
Originally Posted by RCgirl383
Quick question, for my 41" edge I'm gonna get a Omega 72g1100KV, could I use an E-flite 40-amp ESC for that?
40amp will work ok. With a 12x6 prop, going on memory, you will pull about 37amps peak. And about 28 amps constant. I would put the 40amp in and fly it, don't think twice about it.
Oct 11, 2012, 09:44 PM
Well, now that you know ...
Bigster's Avatar
Quote:
Originally Posted by RCgirl383
Would any of the eflite ESCs work? I just noticed the have like three 40amp ones. I wanna get eflite instead of a different brand cuz my local hobby shop is more likely to have eflite.
It also depends on your battery. If you have a high C rated one, it will hold more voltage under load causing the motor to draw more current. I burned up a 36A Thunderbird with the 72g and a 12x6 prop. You might be all right with a 40A, but it's good to have some headroom. A wattmeter would be good to use here.
Oct 11, 2012, 09:53 PM
Wingman II
diggity2424's Avatar
sorry, forgot to specify that I was using a 20c 3s 2200mah Lipo. Obviously anything over 20c would increase amp draw.
Oct 11, 2012, 09:55 PM
3D, 1D at a time!
Park_aviator's Avatar
Sorry Joe, server crashed for a sec. It's back


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion You are addicted to flying when.... postalflyer72 Electric Plane Talk 34 Jul 17, 2011 12:12 AM
Video Angelo Lomelí flying 3D antics Jorge Fernandez Electric Plane Talk 0 Sep 30, 2006 03:22 PM
Tiger Moth antics - flying inverted w/video SnoJetter Parkflyers 49 Sep 16, 2003 08:25 PM
Help! Getting addicted to Park Flying fly4fun Parkflyers 11 Feb 16, 2002 11:58 AM
You know when your addicted to Slow Flying when..... Gman Parkflyers 51 Aug 05, 2001 04:19 AM