Thread Tools
Feb 03, 2012, 08:57 PM
Will fly for food.
Jonathan Ott's Avatar
Question

Newbie dreaming...600mm spider quad frame at GoodLuckBuy


Just curious about the larger frames from GLB? I recon that a larger frame is more stable, and a hex has better lifting capability than a quad...right?

Okay, now please keep in mind I'm a complete newbie with the multi-rotor machines, heck, I've only seen a couple multi's fly in my club, and I'll start out with a quad to learn the basics.

I really like this spider style frame at GLB: http://www.goodluckbuy.com/fiber-gla...lticopter.html



So, if I went with this frame...

And these motors: http://www.goodluckbuy.com/a2212-13-...er-4-pack.html



And these ESC's: http://www.goodluckbuy.com/30a-brush...er-4-pack.html



And this control board: http://www.goodluckbuy.com/kkmultico...adcopter-.html



And the appropriate 10x4.5 CW & CCW props...also available at GLB (but you guys know that )

Receiver will be a 6ch Spektrum AR6200 series, maybe an AR7XXX...

Battery for a quad? 4s, ? mAh...

I'm estimating <650g, without the battery.

Am I on the right track with this?

Thanks,

Jon
Sign up now
to remove ads between posts
Feb 03, 2012, 09:11 PM
Will fly for food.
Jonathan Ott's Avatar
Okay, I just noticed the motors I picked are 3s motors, not 4s...will these work, or should I look for a 4s capable motor set?

Jon
Feb 03, 2012, 09:18 PM
Registered User
you dont need 4s. start with 3s.

i would choose the 20A hobbyking ESC instead of the 30A.. 30a is not necessary.

also for those motors I would use 8x4.5 not 10" props..

good luck!
Feb 03, 2012, 09:42 PM
Registered User
Quote:
Originally Posted by Jonathan Ott View Post
Just curious about the larger frames from GLB? I recon that a larger frame is more stable, and a hex has better lifting capability than a quad...right?

Okay, now please keep in mind I'm a complete newbie with the multi-rotor machines, heck, I've only seen a couple multi's fly in my club, and I'll start out with a quad to learn the basics.

I really like this spider style frame at GLB: http://www.goodluckbuy.com/fiber-gla...lticopter.html



So, if I went with this frame...

And these motors: http://www.goodluckbuy.com/a2212-13-...er-4-pack.html



And these ESC's: http://www.goodluckbuy.com/30a-brush...er-4-pack.html



And this control board: http://www.goodluckbuy.com/kkmultico...adcopter-.html



And the appropriate 10x4.5 CW & CCW props...also available at GLB (but you guys know that )

Receiver will be a 6ch Spektrum AR6200 series, maybe an AR7XXX...

Battery for a quad? 4s, ? mAh...

I'm estimating <650g, without the battery.

Am I on the right track with this?

Thanks,

Jon
Hey Jon! Long Time! (I sold you a lipo charger quite a while ago).

I think you are definitely on the right track with those parts for a starter quad. The KK board is well supported by the community, and can be tuned to fly quite well.

Just to throw you an option, for about $10 more you can get an 'assembled' quad (granted, not the spider quad frame, just a regular quad frame) that uses the FF Freeflight board. http://www.goodluckbuy.com/mini-x400...assembled.html Note that it is assembled, and includes props

I own almost every Flight controller out there (I don't own Hoverfly or DJI . . . yet). But I was super impressed with how stable the FF board flew. On the other hand, it freaks out in the wind and becomes almost unflyable, so maybe it is better to stick with the KK board as you have chosen,

My point is, you are on the right track with simple, cheap components. I would also agree that 20a ESC's should be good on almost any bird you build, until you start using the larger motors (like AV Roto or similar) with 11" props. Then again, the 30 a ones ain't gonna hurt anything, and the additional weight is insignificant.

Good luck, and keep us posted!
Feb 04, 2012, 12:52 PM
Will fly for food.
Jonathan Ott's Avatar
Thanks for the advice!

Jon
Feb 04, 2012, 01:11 PM
An ordinary sort of incredible
mr.incredible's Avatar
4S is definitely not necessary. I don't really know about the motors you have here. They look pretty good on paper. I haven't tried them yet. I may soon. I am using the HK30 amp ESCs and theses motors http://www.hobbypartz.com/75m40-opti...15-1200kv.html I use this battery http://www.hobbyking.com/hobbyking/s...dproduct=20436 with 10x4.7 props and I get about 15 min. My stuff never even gets warm. I went bigger on my motors and ESCs so I could carry cameras. (which I don't have yet)
Feb 08, 2012, 02:17 AM
Registered User
Hi there. Im considering same frame kit. Rigth now ım using normal style X copter with KK board and 4.7 firmware.
My Question is :
-any body tried this spider style? good/bad?
-there seems a square part on the frame. is the CC mount?
Feb 08, 2012, 02:33 AM
Multirotor Builder!!!!!
I have this frame running the free flight board. It is a large and very strong frame. I have a few pics on my blog page. Two nice things about this frame is it includes the landing gear. And I was able to mount the esc,s inside the frame for a very clean looking build.
Feb 08, 2012, 02:34 AM
Multirotor Builder!!!!!
Would I recommend this frame, yes. It flys well.
Feb 08, 2012, 03:11 AM
Registered User
Quote:
Originally Posted by tc3wins View Post
I have this frame running the free flight board. It is a large and very strong frame. I have a few pics on my blog page. Two nice things about this frame is it includes the landing gear. And I was able to mount the esc,s inside the frame for a very clean looking build.
.Yea I have looked at your blog. Looking cool. tnx
Feb 08, 2012, 03:14 AM
Multirotor Builder!!!!!
I will take some flight video this weekend. Last week when I flew it I slammed it into my mail box on accident. And nothing broke. Except for a chipped prop. Lol...
Feb 08, 2012, 03:17 AM
Registered User
Quote:
Originally Posted by tc3wins View Post
I will take some flight video this weekend. Last week when I flew it I slammed it into my mail box on accident. And nothing broke. Except for a chipped prop. Lol...
Great. Looking forward for the video.
Feb 08, 2012, 03:21 AM
Multirotor Builder!!!!!
One thing I forgot to mention. The frame comes with a ton of hardware. But the standoffs are not the right size. They are about 2 mm too short.
Feb 10, 2012, 04:12 PM
Multirotor Builder!!!!!
Here is some outside flight of my freeflight powered spider quad using the GLB spider frame.

spider quad.AVI (2 min 13 sec)
Feb 10, 2012, 05:14 PM
Will fly for food.
Jonathan Ott's Avatar
TC3, can I request a pic of you holding the Spider-quad? I'm having a difficult time visualizing the size of it.

Thanks,

Jon


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Opinions on the <$50 quad frames from GoodLuckBuy? Dax Multirotor Drone Talk 23 Jan 26, 2012 02:43 PM
Sold Logo 600 w/KAOS G10 frames - price lowered AGAIN! flymustangs Aircraft - Electric - Helis (FS/W) 2 Oct 07, 2011 10:19 AM
Sold Trex 700 & 600 both fully loaded for $1,600 shipped rhampton Aircraft - Fuel - Helis (FS/W) 1 Sep 30, 2011 05:09 PM
For Sale Trex 700- Frames, clutch, hub, fan and fan cover 3benny3 Aircraft - Fuel - Helis (FS/W) 1 Dec 26, 2010 05:14 PM
Discussion T-rex 600, Spin a 700mm, of 800mm Baldes? jascamera Aerial Photography 0 Jul 26, 2007 11:18 PM