Thread Tools
Jun 08, 2012, 12:38 PM
Electric Coolhunter
Thomas B's Avatar
Quote:
Originally Posted by ltdorn1
Woot.. thanks Roger... it was the labeling on the sides of the rx that threw me off.

So Rx is good woot. as for the r dial... maybe after the new transmitter excitement wears off i will send it it to get fixed.

R/
I was pretty sure that was what the problem was. I posted the same solution to this when you posted on RCU.
Latest blog entry: 2014 events and travel
Sign up now
to remove ads between posts
Jun 08, 2012, 12:41 PM
Electric Coolhunter
Thomas B's Avatar
Quote:
Originally Posted by Victory Pete
I assumed consistency with the visual ergonomics of the DX18 and DX8.

VP
You know the old saw about what you get when you assume, right?...
Latest blog entry: 2014 events and travel
Jun 08, 2012, 12:44 PM
Registered User
richard hanson's Avatar
Quote:
Originally Posted by Victory Pete
An acceptable inactivity alarm would be a periodic beep every minute or so. A peaceful reminder your Tx is on.

VP
A peaceful reminder ?
Hoboy-----
Jun 08, 2012, 12:45 PM
Electric Coolhunter
Thomas B's Avatar
Quote:
Originally Posted by Victory Pete
"Hobble"? Really? The DX8 is "Hobbley"? I would expect consistency with the screens on the DX18 and DX8.

VP
Given that the feature set of the DX18 is greatly enhanced over the DX8, the DX8 is technically hobbled in comparison to the DX18. This is not a bad thing when the DX8 costs half of the DX18.

Someone once said that "....consistency is the hobgoblin of little minds"... (slightly misquoted on purpose)
Latest blog entry: 2014 events and travel
Jun 08, 2012, 01:02 PM
Registered User
Quote:
Originally Posted by stvinvegas
Speaking of Throttle Curve. Why does it only let you curve 5 points and you can't access 6 and 7?
You have to manually add points 6 & 7. Move the throttle stick in an area between the other points and at the bottom of the screen you will see it show "add point". Scroll down to the bottom over "add point" and click it. If you want the points spaced evenly across the whole range you will first need to remove the points at 25% and 75% using the same method listed above then add them back where you want.
Jun 08, 2012, 01:24 PM
Suspended Account
Quote:
Originally Posted by Thomas B
You know the old saw about what you get when you assume, right?...
Yep, an expensive Tx with "Tiny Text"!

VP
Jun 08, 2012, 01:25 PM
Suspended Account
Quote:
Originally Posted by richard hanson
A peaceful reminder ?
Hoboy-----
Exactly.

VP
Jun 08, 2012, 01:26 PM
Suspended Account
Quote:
Originally Posted by Thomas B
Given that the feature set of the DX18 is greatly enhanced over the DX8, the DX8 is technically hobbled in comparison to the DX18. This is not a bad thing when the DX8 costs half of the DX18.

Someone once said that "....consistency is the hobgoblin of little minds"... (slightly misquoted on purpose)
The DX18 is "Visually Hobbled".

VP
Jun 08, 2012, 01:47 PM
Electric Coolhunter
Thomas B's Avatar
Quote:
Originally Posted by Victory Pete
The DX18 is "Visually Hobbled".

VP
Not in most peoples opinion..;..

You are an excellent case study that proves that you cannot please all the people all the time...or even some of the time...
Latest blog entry: 2014 events and travel
Jun 08, 2012, 03:00 PM
AndyKunz's Avatar
Quote:
Originally Posted by iheli22
DX18 Throttle Curve (Graph) Anomaly...

Couldn't find this discussed but.. In the Throttle Curve screen, if you setup two different throttle curves and assign to a switch, the GRAPH doesn't show the correct Curve when toggling the switch. (Graph only changes when selecting Curve 0 or 1 parameter.) Although the NAME on the Graph changes (ie. Pos0 / Pos1) with the switch but shows the wrong graph...

Other DX18 setup functions with Graphs (ie. D/R & Expo) show the correct name associated with the Graph...

What's up with this ??
You can "disconnect" and "reconnect" them by using the Curve option.

If you exit the screen, they are connected by default and the switch works to select the graph as you expect. Once you change the curve manually, they become disconnected (independent).

The label in the top always shows the current switch position.

Andy
Jun 08, 2012, 03:50 PM
Never fly an A model anything!
jayb1rdz's Avatar
I havent had a chance to jold one yet. I respond well to tactile objects. Hopefully this will get a tick.

Maybe one for the future.... I love my FPV... It would be great to have any switch change or slider change flash on the goggles for a couple of seconds, like the volume prompt or channel name hates flashed on a television screen.
Jun 08, 2012, 03:53 PM
Wings that Swing
iheli22's Avatar
Andy..

Didn't quite understand your reply about the Connect / Disconnect thing on the Throttle Curve Graph...

Other Setup Screens change the Graph when you toggle a switch - The Throttle Curve doesn't.. More importantly, the label changes on the Graph when you toggle, showing the Wrong curve...

I'm sure others have noticed this - or Not?

Can you try to explain it again...
Am I missing something here?

Thanks..
Jun 08, 2012, 04:29 PM
Registered User
Cherokee Flyer's Avatar
I have removed this post at the request of RC Groups.
Last edited by Cherokee Flyer; Jun 10, 2012 at 08:49 AM.
Jun 08, 2012, 04:35 PM
AndyKunz's Avatar
The throttle curve is handled differently than the other curves. The behavior you have is exactly what the spec says it should be for the throttle curve and the different behavior on others is what the spec says they should be.

The current position of the switch is in the top left corner. It shows in text what the switch is set to. It's not always easy to see the position marker below the checkboxes especially if you use Flight Mode as the switch. This is the not title of the graph you're looking at, it's the name of the switch position.

Throttle curves are specifically disconnected from the switch position so that you can select a curve w/o causing a change to the throttle servo.

The other curves default to being connected so that you can see the change immediately on the aircraft.

Andy
Jun 08, 2012, 05:04 PM
Wings that Swing
iheli22's Avatar
Hey Andy..

A little bit confusing - as I would think that the UI should reflect the switch setting..

Thanks for explaining this again.
( I'll try to get my head around it

Thanks for the quick reply...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Spektrum DSM2 and the Nats - Question for Spektrum/JR users aeajr Sailplane Talk 25 May 29, 2012 03:14 PM
Sold Spektrum DX6 6-channel System with Spektrum AR6000 Receiver $50 shooboy Aircraft - General - Radio Equipment (FS/W) 6 Dec 20, 2011 05:12 PM
Sold Spektrum DX6 6-channel System with Spektrum AR6000 Receiver $50 shooboy Aircraft - General - Radio Equipment (FS/W) 4 Dec 14, 2011 07:30 PM
For Sale Spektrum & JR 2.4 Ghz DSM2 receivers for sale I have a sailplane sized Spektrum AR93 zaptherio Aircraft - General - Radio Equipment (FS/W) 1 Nov 15, 2011 05:14 PM
Sold SPEKTRUM DX6i DSMX with Spektrum Ni-cads and charger- like new condition shooboy Aircraft - General - Radio Equipment (FS/W) 6 Oct 19, 2011 04:59 AM