Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Feb 02, 2012, 06:01 PM
pugsam is offline
Find More Posts by pugsam
LiPo-Sucker & Airframe EMT
pugsam's Avatar
Quote:
Originally Posted by 3D-Seth View Post
.....late May is the correct date.
Seth Arnold
Horizon Hobby
The next few months are going to be a real trip!

One HH blockbuster after another. I'd get them all if I could..........

Sign up now
to remove ads between posts
Old Feb 02, 2012, 08:26 PM
coreman is online now
Find More Posts by coreman
Kit Manufacturer
coreman's Avatar
Quote:
Originally Posted by 3D-Seth View Post
The date originally posted was incorrect when it went live, we have it fixed now, and late May is the correct date.

Seth Arnold
Horizon Hobby
We'll miss the indoor season then. Ah well, on to other planes for this winter
RCG Plus Member
Latest blog entry: BluFO review by Jim T Graham
Old Feb 02, 2012, 08:28 PM
coreman is online now
Find More Posts by coreman
Kit Manufacturer
coreman's Avatar
Quote:
Originally Posted by speedy01 View Post
Hopefully not as close as what causes the PoleCat motor to cut the rudder trace during a nose impact when the motor contacts the board!

Gene K
That was my point/worry also. not to worry, i will probably wait until next fall with it coming out in Late May. I'll get the rev 1.01 version after they have shaken them down
RCG Plus Member
Latest blog entry: BluFO review by Jim T Graham
Old Feb 02, 2012, 08:31 PM
brushless55 is offline
Find More Posts by brushless55
big ignore list
brushless55's Avatar
Quote:
Originally Posted by RealGambler View Post
The Spitfire's board is mounted vertically (due to spacing in the fuselage), and the ASK's board is mounted horizontally. I don't own a Pole Cat but I think the board is mounted horizontally too? So a ASK receiver would likely be the ticket.
Ok, help me out with that.. what is a ASK rx?
thanks

Quote:
Originally Posted by 3D-Seth View Post
The date originally posted was incorrect when it went live, we have it fixed now, and late May is the correct date.

Seth Arnold
Horizon Hobby
kinda crappy.... I was holding off a purchase thinking I would see this at my LHS within 2 weeks.. now I will just buy what I was holding off on
Old Feb 02, 2012, 08:51 PM
turboparker is offline
Find More Posts by turboparker
I'd rather be flying!
turboparker's Avatar
Quote:
Originally Posted by brushless55 View Post
Ok, help me out with that.. what is a ASK rx?
thanks..
The scale UMX ASK-21 sailplane - with AS3X! It uses the same basic brick as the Spit (including the brushed ESC), but with a different gyro orientation & different programming. Things are getting interesting!

http://www.horizonhobby.com/products...1-bnf-EFLU1280

https://www.rcgroups.com/forums/show...1585735&page=4

Joel
Old Feb 02, 2012, 10:01 PM
RealGambler is offline
Find More Posts by RealGambler
Way to many airplanes!
Quote:
Originally Posted by brushless55 View Post
Ok, help me out with that.. what is a ASK rx?
thanks
Sorry, as Joel said, it's the receiver in the ASK-21 glider that Horizon just gave us. Like all the new airplanes that came out, it's based on a real airplane.

You can find more information about the company that make this full scale glider here: Alexander Schleicher company

You'll find quite a few "ASK" aircrafts, including some powered gliders.
Old Feb 02, 2012, 10:27 PM
coreman is online now
Find More Posts by coreman
Kit Manufacturer
coreman's Avatar
Quote:
Originally Posted by turboparker View Post
The scale UMX ASK-21 sailplane - with AS3X! It uses the same basic brick as the Spit (including the brushed ESC), but with a different gyro orientation & different programming. Things are getting interesting!

http://www.horizonhobby.com/products...1-bnf-EFLU1280

https://www.rcgroups.com/forums/show...1585735&page=4

Joel
Ah, i read it as two boards in the spit perpendicular to each other. yeah, if the Spit brick is vertical that does avoid the motor submarineing the Rx and breaking the trace, very good. might make replacing the motor with the SX a little easier than in the Polecat too
RCG Plus Member
Latest blog entry: BluFO review by Jim T Graham
Old Feb 02, 2012, 10:45 PM
brushless55 is offline
Find More Posts by brushless55
big ignore list
brushless55's Avatar
Quote:
Originally Posted by turboparker View Post
The scale UMX ASK-21 sailplane - with AS3X! It uses the same basic brick as the Spit (including the brushed ESC), but with a different gyro orientation & different programming. Things are getting interesting!

http://www.horizonhobby.com/products...1-bnf-EFLU1280

https://www.rcgroups.com/forums/show...1585735&page=4

Joel
Thank you..

Quote:
Originally Posted by RealGambler View Post
Sorry, as Joel said, it's the receiver in the ASK-21 glider that Horizon just gave us. Like all the new airplanes that came out, it's based on a real airplane.

You can find more information about the company that make this full scale glider here: Alexander Schleicher company

You'll find quite a few "ASK" aircrafts, including some powered gliders.
Thank you..

I was thinking is was some fancy word, but it's a sailplane!

so its this guy..
http://www.horizonhobby.com/products...1-bnf-EFLU1280
Old Feb 03, 2012, 12:53 AM
Edge767 is offline
Find More Posts by Edge767
AMA 52726
Edge767's Avatar
Oh man... I am SO getting this one. Horizon is killing me. That's three new birds I MUST have this spring.
Old Feb 03, 2012, 12:23 PM
Red Flyer is offline
Find More Posts by Red Flyer
Fly Low - Hit Hard
Red Flyer's Avatar
Please forgive my noobness, but will my old DX5e work with this model?

It says "2.4 GHz DSM Spread Spectrum Technology" on the TX case.

I suspect that I need a newer TX?

Thanks,

RF
Old Feb 03, 2012, 12:31 PM
brushless55 is offline
Find More Posts by brushless55
big ignore list
brushless55's Avatar
Quote:
Originally Posted by Red Flyer View Post
Please forgive my noobness, but will my old DX5e work with this model?

It says "2.4 GHz DSM Spread Spectrum Technology" on the TX case.

I suspect that I need a newer TX?

Thanks,

RF
it will work bro!
Old Feb 03, 2012, 12:54 PM
Fish99 is offline
Find More Posts by Fish99
Flying addicted and lovin it!
Fish99's Avatar
Quote:
Originally Posted by Red Flyer View Post
Please forgive my noobness, but will my old DX5e work with this model?

It says "2.4 GHz DSM Spread Spectrum Technology" on the TX case.

I suspect that I need a newer TX?

Thanks,

RF
I suspect this AS3X technology is going to breath a bit of ew life in to the DX5e Tx. It has no expo settings available on it, but with the new tech, the planes apparently don't require it. As they are all micro models, 5 channels is more than enough to fly them, so the DX5e, being cheap and full range, is a great option.

Just a musing. I can't WAIT for this little bird. A must purchase for me. Looks amazing.

Marlin
Old Feb 03, 2012, 02:47 PM
BlazingStar is offline
Find More Posts by BlazingStar
-=BS=-
BlazingStar's Avatar
Why not use a BL motor?
would it have added so much to the price?
Old Feb 03, 2012, 03:04 PM
electricrc68 is offline
Find More Posts by electricrc68
The Sweet Aroma of Fuel
electricrc68's Avatar
Quote:
Originally Posted by BlazingStar View Post
Why not use a BL motor?
would it have added so much to the price?
it probably would add a good amount to the price. the reason why i like the brushed ones better is the speed. i don't have enough space for a brushless plane to be zipping around.
Old Feb 03, 2012, 04:05 PM
Red Flyer is offline
Find More Posts by Red Flyer
Fly Low - Hit Hard
Red Flyer's Avatar
Quote:
Originally Posted by brushless55 View Post
it will work bro!
Hexallent !

Thanks,

RF


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product E-flite UMX MiG 15 Ducted Fan Jet with AS3X Bowerz Micro Ready-to-Fly 186 Apr 13, 2016 11:12 AM
Article Horizon Hobby Blade mQX Micro Quad-Copter with AS3X RTF & BNF Review Michael Heer Multirotor Talk 32 Jan 30, 2016 07:51 PM
New Product E-Flite UMX Mig 15 with AS3X! Bowerz Scratchbuilt Indoor and Micro Models 4 Jan 16, 2012 08:02 PM
Discussion UMX S-Bach or Beast 3d (with AS3X)? The Spirit 3D Foamies 6 Jan 07, 2012 06:41 AM
Sold Eflite UMX Beast 3D BNF with AS3X Technology baddb1 Aircraft - Electric - Airplanes (FS/W) 3 Dec 19, 2011 06:42 AM