Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jul 29, 2012, 09:10 AM
A Rdnek is offline
Find More Posts by A Rdnek
Bruno, GOOD DOG
A Rdnek's Avatar
Quote:
Originally Posted by mkcp40 View Post
That's my plane!
What's your plane, the one pictured in post #853?
Rn
Sign up now
to remove ads between posts
Old Jul 29, 2012, 10:09 AM
whichwaysup is offline
Find More Posts by whichwaysup
when down=up, up=expensive
whichwaysup's Avatar
Quote:
Originally Posted by turboparker View Post
WWU,

Not sure about a thread. However, the F4U is overweight as it is. Switching to the AWS3X brick and mandatory AS3X aileron servos will make it even heavier. One would need a Bravo SX motor for anything resembling warbird performance. Also - the Spit's brick is mounted on-edge. I doubt that the F4U's fuse is tall enough. The ASK-21 brick is essentially the same as the Spit's, but it's set up for horizontal mounting. Problem is, AS3X programming for a 3' span sailplane probably won't work very well in a 16" span warbird. However - the AR6410NBL brick that's used in the MiG is user-programmable. There will be downloadable AS3X programs to cover a range of airframe types - such as 'slowflyer' '3D' 'EDF', etc. You just pick the program that works the best in your application & load it into the brick via the USB to X-port programming cable. There has been talk of the other AS3X bricks also being user-programmable, but I'm not aware of any official word on that. If it turns out that the others are in fact programmable, it may be possible to use the ASK-21 brick in the F4U and download a new program that's better-suited for a warbird.

Joel
Thanks Joel. So, I'll need a mig brick or the AR6410NBL brick + 2 AS3X servos (I've got an older corsair) to make it work, plus a likely power upgrade. MIght be the most expensive used airplane I'll ever own. I've got about 5 burnt out motors waiting at home for me to send to RC babel for some SX upgrades for a few of my birds - the Corsair will likely get the first one (and I'll be saving one back for the Spitfire, just in case.)

Sorry so far off topic.
Old Jul 29, 2012, 11:35 AM
turboparker is online now
Find More Posts by turboparker
I'd rather be flying!
turboparker's Avatar
Quote:
Originally Posted by whichwaysup View Post
Thanks Joel. So, I'll need a mig brick or the AR6410NBL brick + 2 AS3X servos (I've got an older corsair) to make it work, plus a likely power upgrade. MIght be the most expensive used airplane I'll ever own. I've got about 5 burnt out motors waiting at home for me to send to RC babel for some SX upgrades for a few of my birds - the Corsair will likely get the first one (and I'll be saving one back for the Spitfire, just in case.)

Sorry so far off topic.
You're welcome! But you don't want the AR6410NBL. It doesn't have AS3X, and it's 2s brushless. The MiG's AS6410NBL brick is also 2s brushless. Also - both bricks are servoless, so they require a full set of AS3X servos. You'd want the ASK-21's EFLU1264 brick with the 'warbird' program installed, or the Spit's PKZU2164 brick with the orientation changed to 'horizontal' via the programming software (assuming that the EFLU1264 & PKZU2164 are in fact programmable, as Spektrum's brick compatability chart suggests):





See the the MiG 15 thread & the first post in RealGambler's AS3X FAQ thread for details about the programming interface & the downloadable programs.

Joel
Old Jul 29, 2012, 03:13 PM
mkcp40 is offline
Find More Posts by mkcp40
Registered User
mkcp40's Avatar
Quote:
Originally Posted by A Rdnek View Post
What's your plane, the one pictured in post #853?
Rn
Yes, the picture is from the UM F4U thread. I hope the Spitfire flies as well as the new edition of the F4U, as that will make for one sweet warbird.
Old Aug 17, 2012, 07:45 PM
Razors edge 29 is offline
Find More Posts by Razors edge 29
QuAd FaNaTiC
Razors edge 29's Avatar
I can't believe this still isn't out yet

Ridiculous !
Old Aug 17, 2012, 08:14 PM
brushless55 is online now
Find More Posts by brushless55
big ignore list
brushless55's Avatar
agreed!
Old Aug 17, 2012, 08:45 PM
RealGambler is offline
Find More Posts by RealGambler
Way to many airplanes!
Me too, I think they should have released it already, but with defective servos like the Carbon Cub. I do prefer to have a defective airplane early rather than waiting for a functional one with good servos! C'mon HH!
Old Aug 18, 2012, 07:47 AM
whichwaysup is offline
Find More Posts by whichwaysup
when down=up, up=expensive
whichwaysup's Avatar
Quote:
Originally Posted by RealGambler View Post
Me too, I think they should have released it already, but with defective servos like the Carbon Cub. I do prefer to have a defective airplane early rather than waiting for a functional one with good servos! C'mon HH!
Lol. +1. What the hell else are we gonna talk about on this forum if everything works properly!
Old Aug 18, 2012, 10:03 AM
matrixFLYER is offline
Find More Posts by matrixFLYER
Registered User
matrixFLYER's Avatar
Quote:
Originally Posted by whichwaysup View Post
Lol. +1. What the hell else are we gonna talk about on this forum if everything works properly!
-1 I prefer to have e long wait but a perfect plane
Old Aug 18, 2012, 11:37 AM
turboparker is online now
Find More Posts by turboparker
I'd rather be flying!
turboparker's Avatar
If they'd have released the plane earlier, it would have most likely ended up with servos from the bad batch. That would have really pissed everyone off. So, they did the right thing & delayed the release until they get the servo debacle straightened-out. And then people find something wrong with that.

I am very glad that they delayed the release. It was the proper thing to do, given the situation. This should be a no-brainer to anyone on here who has even a shred of business sense.

Joel
Old Aug 18, 2012, 01:33 PM
coreman is offline
Find More Posts by coreman
Kit Manufacturer
coreman's Avatar
Quote:
Originally Posted by matrixFLYER View Post
-1 I prefer to have e long wait but a perfect plane
sounds like a hanger queen to me!
RCG Plus Member
Latest blog entry: BluFO review by Jim T Graham
Old Aug 18, 2012, 02:54 PM
I R Irv is offline
Find More Posts by I R Irv
Registered User
I R Irv's Avatar
Has HH posted what the real cause for the delay is?
TODD
Old Aug 18, 2012, 07:06 PM
cmdl is offline
Find More Posts by cmdl
http://www.sgvhumane.org/
cmdl's Avatar
Quote:
Originally Posted by turboparker View Post
If they'd have released the plane earlier, it would have most likely ended up with servos from the bad batch. That would have really pissed everyone off. So, they did the right thing & delayed the release until they get the servo debacle straightened-out. And then people find something wrong with that.

I am very glad that they delayed the release. It was the proper thing to do, given the situation. This should be a no-brainer to anyone on here who has even a shred of business sense.

Joel
completely agree - bad reviews and lost loyalty kill a business. easier to keep a customer than get a new one. i just need some help getting the spitfires out of my dreams
Old Aug 18, 2012, 08:28 PM
turboparker is online now
Find More Posts by turboparker
I'd rather be flying!
turboparker's Avatar
Quote:
Originally Posted by I R Irv View Post
Has HH posted what the real cause for the delay is?
TODD
Quite some time ago, the director of aircraft development posted in CC thread that the servo issue was caused by the manufacturer skipping an established QC process. That's why the CC & Beast were on backorder for so long, and that's why the AS3X bricks w/integrated tail servos were also unavailable. Given that the same servos are used in all of the AS3X planes, it is reasonable to think that the servo problem is likely what has caused the delay with the Spit & ASK-21.

Joel
Old Aug 18, 2012, 10:19 PM
jwman is offline
Find More Posts by jwman
Registered User
If you are looking for a great flying Spit just buy the nine eagles parts from HK and put the micro P-51 guts in it. It flies great that way. Should hold you over till this one is available.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product E-flite UMX MiG 15 Ducted Fan Jet with AS3X Bowerz Micro Ready-to-Fly 186 Apr 13, 2016 11:12 AM
Article Horizon Hobby Blade mQX Micro Quad-Copter with AS3X RTF & BNF Review Michael Heer Multirotor Talk 32 Jan 30, 2016 07:51 PM
New Product E-Flite UMX Mig 15 with AS3X! Bowerz Scratchbuilt Indoor and Micro Models 4 Jan 16, 2012 08:02 PM
Discussion UMX S-Bach or Beast 3d (with AS3X)? The Spirit 3D Foamies 6 Jan 07, 2012 06:41 AM
Sold Eflite UMX Beast 3D BNF with AS3X Technology baddb1 Aircraft - Electric - Airplanes (FS/W) 3 Dec 19, 2011 06:42 AM