Blu-F-O Part 1
I've been working on this design since last fall. It's loosely inspired by a design called the "Blue_Wonder". A nearby club uses the "Blue Wonder" as an inexpensive, single design, full contact, club combat platform. One of our club members named John has built a couple "Blue Wonders". Another club member named Leo was inspired by the performance of John's Blue Wonder and built a modified "Depron Wonder" from 6mm Depron by adding a fuselage to house the battery and electronics.
Inspired by John and Leo, but wanting a plane with a few more curves, I did a quick little concept sketch. I scanned my sketch and imported it into AutoCAD. I then drew up my first set of plans based on the sketch. It took me a little over a week to build my first protoype, which flew very nicely. The only thing I didn't care for on the prototype were the proportions of the fuselage. So I tweaked the plans a little and built a second version, which I completed in about 10 hours from cutting to flying. The second prototype flew just like the first. I've decided to call my version the "Blu-F-O".
I just did a build thread for this model: https://www.rcgroups.com/forums/show....php?t=1655800
ImagesView all Images in thread
Last edited by MetroGTi; May 20, 2012 at 07:29 PM.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||SkyMaster 1/6 Scale F-16 Jet Turbine Video Part 1 By PlaneVideoArt||At_your_six||Jet Turbines||0||Apr 23, 2009 05:57 PM|
|Discussion||1/8th Scale Cermark/EJF F-16, Part Deux||FL62||Electric Ducted Fan Jet Talk||67||Mar 11, 2008 11:45 AM|
|I.F.O. as O.F.O.||kennypinkerton||Parkflyers||0||Apr 20, 2003 11:11 PM|