The Eagle's Motor Arrived - Hangar 9 Christen Eagle II - RC Groups
Thread Tools
This thread is privately moderated by ViperZ, who may elect to delete unwanted replies.
Jan 23, 2012, 06:34 PM
This is my Nemesis....
ViperZ's Avatar

The Eagle's Motor Arrived - Hangar 9 Christen Eagle II

The motor, spinner and prop arrived today! What a machine! I like the size of it and I'm anxious to to get it fitted, but must ten to domestic chores first, like making supper

Still was able to get some pictures in...

I got the motor box mounted and glued in place. I then mounted the motor just to See how she fits. It just fits... The Prop adapter is a 12mm shaft, so I need a bigger prop reamer as well I will need to drill out the Spinner back plate. My current one is only good to 10mm. With the Dave Brown Spinner, I think a longer bolt will be all that is needed to reach the prop adapter pre drilled and tapped hole. Good deal!

I noticed the motor box mounting cap screws are much longer than required so I will cut them down just to be sure I don't punture Lipos for any reason.
Last edited by ViperZ; Mar 28, 2012 at 02:29 PM.
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Soaring Eagle tw 738 motor ccatalin Crash Discussion 0 Aug 08, 2011 06:45 AM
Discussion Here's a video of my Skywalker FPV maiden with eagle tree osd bigo66 FPV Talk 4 Jul 19, 2011 06:10 PM
Discussion Nine Eagle's new 2 types of 3D helis zgao01 3D Electric Heli Flying 0 Jun 09, 2011 06:57 AM
WoooHoo Honeybee2 CP just arrived! (Here's what's in the Box) mrebman Micro Helis 2 Jul 13, 2005 09:54 PM
It's Here, It's Here The SB Has Arrived jerrysimon Parkflyers 8 Jun 14, 2002 08:22 PM