Feb 10, 2012, 02:29 PM
Registered User
lrplin's Avatar
Thank you.
Sign up now
to remove ads between posts
Feb 10, 2012, 06:12 PM
Registered User
732002's Avatar
Quote:
Originally Posted by gravityking View Post
I

Or does anybody have direct experience with the Hangar 9 HAN4005?
https://www.rcgroups.com/forums/show....php?t=1344648
search this, I think this is the same plane clipped/L4/J3
Yes the H9 gear works well.
Feb 10, 2012, 08:43 PM
Demonstrations on Saturdays!
gravityking's Avatar
Thanks digits or BMW fan!

Good enough info to try it, cheap too.
Feb 10, 2012, 08:51 PM
Registered User
lrplin's Avatar
maiden mine this evening, terrible result. I am an experienced pilot, and I can't believe that I fail on a cub! Once the cub climbed up 2 meters above ground, then it starting to has some nasty un-controllble stall to the right. I try took off twice, both happen the same. The second try end up some damages on the right wing tip and a broken motor mount.
My setup is 4s 2200mah, HobbyKing Donkey ST4010-820kv, 12x4, AUW is 2245g. With this setup, the donkey motor barely supplied enough power. I will change to 13' prop or try the heads-up hobby motor 3542-11 next time.

I need to rebuilt the motor mount tonight, and try to find out what cost the un-controllble right tendence stall.
Last edited by lrplin; Feb 10, 2012 at 08:58 PM.
Feb 10, 2012, 08:59 PM
Dude, I do fly all day long!
rcalldaylong's Avatar
Quote:
Originally Posted by lrplin View Post
maiden mine this evening, terrible result. I am an experienced pilot, and I can't believe that I fail on a cub! Once the cub climbed up 2 meters above ground, then it starting to has some nasty un-controllble stall to the right. I try took off twice, both happen the same. The second try end up some damages on the right wing tip and a broken motor mount.
My setup is 4s 2200mah, HobbyKing Donkey ST4010-820kv, 12x4, AUW is 2245g. With this setup, the donkey motor barely supplied enough power. I will change to 13' prop or try the heads-up hobby motor 3542-11 next time.

I need to rebuilt the motor mount tonight, and try to find out what cost the un-controllble right tendence stall.
are you tail heavy? where is your CG? I thought you weren't going to maiden till monday...I was going to come and maiden mine with you.
Feb 10, 2012, 09:03 PM
inverted-i-fly
3drcparts's Avatar
where was your CG?, sound like it would be underpowered, I'm going to run a 4260-06 with 13x6.5 and 5000mah 4s, 112 oz thrust @ 54 amps (820 watts) Cg is perfect at 70mm back of LG
Feb 10, 2012, 09:05 PM
Dude, I do fly all day long!
rcalldaylong's Avatar
Quote:
Originally Posted by janole View Post
where was your CG?, sound like it would be underpowered, I'm going to run a 4260-06 with 13x6.5 and 5000mah 4s, 112 oz thrust @ 54 amps (820 watts) Cg is perfect at 70mm back of LG
That's starting to worry me...I'm only at 63 ounce thrust! But my cub is barely hitting 70 ounces AUW though...
Feb 10, 2012, 09:12 PM
inverted-i-fly
3drcparts's Avatar
I always look at watts per pound and like it in the 130-150 range for this type of aircraft, I over power everything, nothing worse than not being able to power out of my thumbs

Plus it is easier to prop down, cell down that change a motor
Feb 10, 2012, 09:12 PM
Registered User
UCPILOT110's Avatar
Quote:
Originally Posted by lrplin View Post
maiden mine this evening, terrible result. I am an experienced pilot, and I can't believe that I fail on a cub! Once the cub climbed up 2 meters above ground, then it starting to has some nasty un-controllble stall to the right. I try took off twice, both happen the same. The second try end up some damages on the right wing tip and a broken motor mount.
My setup is 4s 2200mah, HobbyKing Donkey ST4010-820kv, 12x4, AUW is 2245g. With this setup, the donkey motor barely supplied enough power. I will change to 13' prop or try the heads-up hobby motor 3542-11 next time.

I need to rebuilt the motor mount tonight, and try to find out what cost the un-controllble right tendence stall.
Maybe under power set up, batt ok, prop and motor?, the recomended set up calls in for a 13X4 prop, I did run mine with a G15 and a 13X6 with a 3300mAh 3's it lifted the plane fine but I felt it still under powered, Upgrade the motor with a power 32(E-flite) and a will test tomorrow with same prop but a 2650 mAh 4s this time.
Feb 10, 2012, 09:26 PM
FLYING Better Than Drugs
oldfish's Avatar
MHO I was always told that you should have a least 100 watts per pound. My self I like to go a little beyond that, you don't have to fly at WOT but it sure is nice to have the power when you realy need it.

Bob
Feb 10, 2012, 09:30 PM
EIEIEIO Classic is dway ta go!
flyinwalenda's Avatar
Quote:
Originally Posted by lrplin View Post
maiden mine this evening, terrible result. I am an experienced pilot, and I can't believe that I fail on a cub! Once the cub climbed up 2 meters above ground, then it starting to has some nasty un-controllble stall to the right. I try took off twice, both happen the same. The second try end up some damages on the right wing tip and a broken motor mount.
My setup is 4s 2200mah, HobbyKing Donkey ST4010-820kv, 12x4, AUW is 2245g. With this setup, the donkey motor barely supplied enough power. I will change to 13' prop or try the heads-up hobby motor 3542-11 next time.

I need to rebuilt the motor mount tonight, and try to find out what cost the un-controllble right tendence stall.
A 12x4 prop? That's not enough prop,not enough torque to pull the plane along. It's stalling on you. You don't want top end speed you want low end grunt for a cub.
Feb 10, 2012, 09:40 PM
Registered User
lrplin's Avatar
Thank you all for these feedbacks. It should be underpower with my setup and cost the stall. I can't cheap on the motors anymore. Need to look for a motor has more "horse power"
Feb 10, 2012, 09:41 PM
Registered User
lrplin's Avatar
Quote:
Originally Posted by rcalldaylong View Post
are you tail heavy? where is your CG? I thought you weren't going to maiden till monday...I was going to come and maiden mine with you.
My CG is correct. If you are coming on Monday, then it should be fine, cause I have many other planes . but I wont get off from work untill 3:30.
Feb 10, 2012, 11:19 PM
Registered User
lrplin's Avatar
I am going for this motor combo:
http://www.ebay.com/itm/220947042904...84.m1438.l2649

Is that over rated?
Feb 10, 2012, 11:35 PM
Dude, I do fly all day long!
rcalldaylong's Avatar
Quote:
Originally Posted by lrplin View Post
I am going for this motor combo:
http://www.ebay.com/itm/220947042904...84.m1438.l2649

Is that over rated?
That motor is smaller than your donkey one. Look at the HK sk3 series around 190grs or so....should be plenty. The donkey should be fine too, just needs bigger prop


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale SIG Clipped-wing Cub Kit ronrange Aircraft - Fuel - Airplanes (FS/W) 4 Jul 03, 2013 11:27 PM
For Sale Sig Manufacturing Clipped Wing J3 Cub 40 ARF $100 + ship seprice40 Aircraft - Fuel - Airplanes (FS/W) 0 Dec 28, 2011 10:11 PM
Discussion SureFlite clipped wing cub with custom paint DeaninMilwaukee Parkflyers 2 Dec 17, 2011 07:52 PM
Discussion Covering CMP Clipped Wing Cub Willie Everlearn Scale Sailplanes 6 Oct 15, 2011 05:21 PM
Discussion RE: World Models Clipped Wing Cub 1:5 scale StoneGod Scale Kit/Scratch Built 0 Sep 14, 2011 01:42 PM