BP A2814-8 Brushless Outrunner Motor (Power 10 size/performance) - RC Groups
Thread Tools
This thread is privately moderated by jgalexander, who may elect to delete unwanted replies.
Jan 22, 2012, 06:35 AM
Trader Rating: 905
Flying Full Size & Fun Size :)
jgalexander's Avatar
Sold

BP A2814-8 Brushless Outrunner Motor (Power 10 size/performance)


This motor is a beast. Very similar to my E-flite power 10 (see pic) in both size and in power capacity. Speced up to 4s though, which is one "s" more than the power 10 This one is used, but other than a few scratches on the x-mount, it looks great, and works perfectly. Choose one of the pictured collet adaptors. They're all the same shaft size (6mm), just different lengths. If you need a different prop mount, let me know and I'll see what I can dig up.
$25 shipped USPS with tracking. Paypal, cash, MO, check are all good for payment.
Thanks for looking,
Josh

SPECS:
No. of Cells: 3 - 4 Li-Poly
8 - 12 NiCd/NiMH
Kv: 1100 RPM/V
Max Efficiency: 81%
Max Eff. Current: 15 - 25A (>75%)
No Load Current: 1.8A @10V
Resistance: 0.072 ohms
Max Current: 35A for 60S
Max Watts: 380W
Weight: 102.8 g / 3.62 oz
Size: 35 mm x 36 mm
Shaft Diameter: 4mm
Poles: 14
Model Weight: 1000 - 1700 g / 35 - 60 oz
Last edited by jgalexander; Jan 23, 2012 at 06:47 AM.
Sign up now
to remove ads between posts
Jan 22, 2012, 11:27 AM
Trader Rating: 357
PSALM 14:1
Sammy70's Avatar
PM sent earlier...
Jan 22, 2012, 02:52 PM
Trader Rating: 160
Registered User
scottc39's Avatar
dose this motor mount up the same as the power 10.
Jan 22, 2012, 06:07 PM
Trader Rating: 905
Flying Full Size & Fun Size :)
jgalexander's Avatar
Replied!

Scott, the X-mount isn't exactly the same, as the bolt pattern on the back of the BP motor is different from the Power 10. That said, the location of the screw holes for attaching the x-mount to the body are the same. So, if you already have holes for a Power 10 on your plane, this should bolt right up.
Josh
Jan 22, 2012, 06:14 PM
Trader Rating: 160
Registered User
scottc39's Avatar
not sure what i want to do, i was thinking of puting it in my leader 480 on 4 cell but have .10 turnigy on the way. dont hold it tho.
Jan 22, 2012, 06:31 PM
Trader Rating: 905
Flying Full Size & Fun Size :)
jgalexander's Avatar
No sweat - thanks for the heads up. I'll keep the thread updated if I sell it.
J
Jan 22, 2012, 08:11 PM
Trader Rating: 71
Got the Slickness
gabrielisrael's Avatar
This is a great motor on 4 cells. Well worth the money he is asking for!
Jan 22, 2012, 08:40 PM
Trader Rating: 905
Flying Full Size & Fun Size :)
jgalexander's Avatar
Thanks Gabriel!
Jan 26, 2012, 11:27 AM
Trader Rating: 15
Oh no, not again!
jhspring's Avatar
PM sent
Jan 26, 2012, 03:09 PM
Trader Rating: 905
Flying Full Size & Fun Size :)
jgalexander's Avatar
Replied. Sold pending payment.
Jan 26, 2012, 10:36 PM
Trader Rating: 905
Flying Full Size & Fun Size :)
jgalexander's Avatar
Sold!

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Turnigy RotoMax 50cc Size Brushless Outrunner Motor Firefox675 Electric Motor Design and Construction 11 Feb 21, 2012 11:05 PM
Sold Mega Motors 600/10/11 brushless outrunner - very rare high quality motor SPasierb Aircraft - Electric - Power Systems (FS/W) 1 Dec 25, 2011 09:53 PM
Sold New Scorpion S-4025-10 (S-4025-10) brushless motor ... power 60 size aquaanox Aircraft - Electric - Power Systems (FS/W) 1 Dec 14, 2011 03:41 PM
Sold E-Flite EFLM4010A Power 10 Brushless Outrunner 1100KV Jester707 Aircraft - Electric - Power Systems (FS/W) 2 Jul 09, 2011 07:15 PM
Sold E-Flite EFLM4010A Power 10 Brushless Outrunner 1100KV Jester707 Aircraft - Electric - Jets (FS/W) 0 Jul 09, 2011 06:45 PM