Slipper clutch for Walkera 4#6, 4G6, V120 size shaft driven tails - Page 4 - RC Groups
Thread Tools
Feb 23, 2012, 12:19 AM
Registered User
Atomic Skull's Avatar
Where can I get more tubing to replace the clutch with? I think it has started to wear out.
Sign up now
to remove ads between posts
Feb 23, 2012, 05:51 AM
Registered User
Slimshamis's Avatar
Should b small OD nitro fuel tube
Feb 23, 2012, 12:32 PM
Registered User
Manny5150's Avatar
I a purchased a slipper clutch from you and I have extra tail shafts. Can I mail them to you so you can make a notch in the shaft for collar? If so, what would be the cost?

Thanks and great idea!!!!
Feb 23, 2012, 08:33 PM
Heli collector
livonia bob's Avatar
Quote:
Originally Posted by Atomic Skull
Where can I get more tubing to replace the clutch with? I think it has started to wear out.
Have you readjusted your clutch that much already.. That you have burned up what I SENT YOU, THE TWO CUT TO LENGTH PIECES AND THE LONGER DIY LENGTH.. Or have you forgotten that this is adjustable for wear? You need DuBro 221..

Or you can wait till I get back home and I'll send you some cut to length ones as I'm not sure how the DIY ones would work as I rotary cut them.


Any one else have this problem?? Do I need to include more of them in the lit??
Last edited by livonia bob; Feb 23, 2012 at 09:06 PM.
Feb 23, 2012, 08:49 PM
Heli collector
livonia bob's Avatar
Quote:
Originally Posted by Manny5150
I a purchased a slipper clutch from you and I have extra tail shafts. Can I mail them to you so you can make a notch in the shaft for collar? If so, what would be the cost?

Thanks and great idea!!!!
Yes we can do that,,,

How about 3 bucks per shaft plus 3 bucks shipping???
Feb 23, 2012, 08:50 PM
Heli collector
livonia bob's Avatar
Quote:
Originally Posted by Slimshamis
Should b small OD nitro fuel tube

DuBro #221 is only one that will work..
Feb 23, 2012, 08:58 PM
Heli collector
livonia bob's Avatar
Quote:
Originally Posted by Heli Biggie
Well at least you know i can follow instructions..... Glad to hear someones in florida having a noce time , lol , it was super windy in panama and my v120 tail couldnt hold up , but maybe now..... I hope you took a heli and make a video for us all. Have fun and enjoy

While a lot of you think that model heli's is my #1 hobby,,,, And some of you think that it's model airplanes... You are both wrong.... It's really nearly naked young lady watching.... And that's what I'm keeping busy doing right now... I planned ahead and didn't bring any models with me..

As I'm sure none of you share this hobby. I'll not bother posting any video's.. As I would hate to take this thread OT...
Feb 24, 2012, 04:33 PM
Registered User
Manny5150's Avatar
Quote:
Originally Posted by livonia bob
Yes we can do that,,,

How about 3 bucks per shaft plus 3 bucks shipping???
Can the postage be like $.46 since it can be mailed first class? It will weight less than 13 oz.

Thanks!!
Feb 24, 2012, 11:42 PM
Heli collector
livonia bob's Avatar
Quote:
Originally Posted by Manny5150
Can the postage be like $.46 since it can be mailed first class? It will weight less than 13 oz.

Thanks!!
I will be happy to do shipping for 46 cents as long as you are not holding me responsible for the shafts getting bent in the mail.....
Feb 26, 2012, 11:08 AM
They call me plan B
Heli Biggie's Avatar
I finally tested the tail clutch , and found it not tight enough, so 1 wreck later , its all good , this haeli has wrecked so many times , but still flys after , i love it and the mods that people make up. Thanks bob, i hope u jad a nice vacation


Quote:
Originally Posted by livonia bob
I will be happy to do shipping for 46 cents as long as you are not holding me responsible for the shafts getting bent in the mail.....
Feb 26, 2012, 12:06 PM
Heli collector
livonia bob's Avatar
Quote:
Originally Posted by Heli Biggie
I finally tested the tail clutch , and found it not tight enough, so 1 wreck later , its all good , this haeli has wrecked so many times , but still flys after , i love it and the mods that people make up. Thanks bob, i hope u jad a nice vacation

I'm really questining if what you wrote in the first sentence of your post #45 is really true or not!!
Feb 28, 2012, 08:42 PM
They call me plan B
Heli Biggie's Avatar
Lol, did my 1st flip with the ,120do2 plus tail clutch , it held up great , thanks again


Quote:
Originally Posted by livonia bob
I'm really questining if what you wrote in the first sentence of your post #45 is really true or not!!
Mar 08, 2012, 03:54 AM
Registered User
Atomic Skull's Avatar
Quote:
Originally Posted by livonia bob
Have you readjusted your clutch that much already.. That you have burned up what I SENT YOU, THE TWO CUT TO LENGTH PIECES AND THE LONGER DIY LENGTH.. Or have you forgotten that this is adjustable for wear? You need DuBro 221..

Or you can wait till I get back home and I'll send you some cut to length ones as I'm not sure how the DIY ones would work as I rotary cut them.


Any one else have this problem?? Do I need to include more of them in the lit??
Sorry I had dental surgery on the 24'th and was laid up for about a week and sort of forgot to get back to this thread. I bought some tubing from the LAH that worked. I think it was DuBro #221 but I lost the package and can't remember exactly what it was (that week I was out of it). Whatever it was, it works.
Mar 08, 2012, 09:30 AM
Heli collector
livonia bob's Avatar
Quote:
Originally Posted by Atomic Skull
Sorry I had dental surgery on the 24'th and was laid up for about a week and sort of forgot to get back to this thread. I bought some tubing from the LAH that worked. I think it was DuBro #221 but I lost the package and can't remember exactly what it was (that week I was out of it). Whatever it was, it works.
Great,, I still fond it hard to believe that you went through all i included with the kit..
Mar 17, 2012, 04:06 PM
Registered User
Quote:
Originally Posted by livonia bob
I have no idea. what heli podcast??.. should I go into hiding??
Sorry, Bob. Was it 'Crashcast'. I'm sure that they referred to you and said your name in a rather strange way!!!

Maybe not then?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale 4G6 V120 4#6 etc metal tail block w new bearing & NIP metal tail mixer + hella4g6Lipo blueindian Aircraft - Electric - Helis (FS/W) 0 Aug 26, 2011 01:03 AM
For Sale Walkera Main Shaft for 4#6, 4#6S, 4#6 BELL & V120D01 Torch8 Aircraft - Electric - Helis (FS/W) 0 Mar 22, 2011 09:52 PM
Wanted wanted walkera servos for 4#6 / 4G6 etc. size heli blueindian Aircraft - Electric - Helis (FS/W) 0 Jan 31, 2011 03:34 AM
Sold FS: 4#6/4G6/V120 Parts AtTheCross Aircraft - Electric - Helis (FS/W) 3 Oct 29, 2010 02:25 AM
Discussion New 4#6/4G6/V120 Landing Gear Break nute53 Micro Helis 17 Jul 12, 2010 09:24 PM